• Journal of the Korea Fashion and Costume Design Association
• /
• v.21 no.4
• /
• pp.195-211
• /
• 2019

In this paper, Capstone Design Education Program Learning Model was developed and recommended in order to foster convergent talents armed with practical competences and real cooperative capabilities. In this era of convergence and creativity, the fashion world needs human resources with cooperative skills and true professional abilities. A case analysis, an in-depth interview, and 1,2 test method were used for data acquisition and analysis. The summary of this study is described below. First, this program needs to complement the NCS fashion design learning module. Second, material changes to creativity and practical competencies - knowledge, skills, and attitudes - of the students are assessed after applying Capstone Design to the NCS fashion design learning model. Third, the process of converging fashion curriculum with IT and electronic technology, developing a fashion design learning program, and applying the Capstone Design was tested to prove the effectiveness of convergent fashion design education. Among the changes observed between the trial and control groups, it was confirmed that sub-factors of creative personality, i.e. self-assurance and openness, were increased along with knowledge, core competences including communication capability, and self-directed learning capability. The greatest improvement on the technological side was observed in IT literacy while ability to respond to changes was also increased. Besides, effects were demonstrated in behavioral factors such as initiative, spirit of challenge, experience, and openness. Lastly, the Capstone Design Education Program Learning Model was proposed in order to foster convergent talents in the fashion world.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1998.04a
• /
• pp.262-271
• /
• 1998

Recent, more and more steel deck bridges are adopted for the design of long span bridges and the upgrading of existing concrete deck bridges, mainly because of reduced self weight, higher stiffness and efficient erection compared to concrete decks. The main objective of this study is to propose on formulation of the design optimizations to develop an optimal desist program required for optimum desist for orthotropic steel-deck bridges. The objective function of the optimization is formulated as a minimum initial cost design problem. The behavior and design constraints are formulated based on the ASD and LRFD criteria of the Korean Bridge Design Code(1996). The optimum design program developed in this study consists of two steps. In the first step the system optimization of the steel box girder bridges is carried out. And in the second step the program provided the optimum design of the orthotropic steel-deck with close ribs. In the optimal design program the analysis module for the deck optimization is based on the Pelican Esslinger method. The optimizer module of the program utilizes the ADS(Automated Desist Synthesis) routines using the optimization techniques fuor constrained optimization. From the results of real application examples, The cost effectiveness of optimum orthotropic steel-deck bridges designs based on both ASD and LRFD methods is investigated by comparing the results with those of conventional designs, and it may be concluded that the design developed in this study seems efficient and robust for the optimization of orthotropic steel-deck bridges

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2000.10a
• /
• pp.206-212
• /
• 2000

In this study, computer program for the optimum design of agricultural aqueduct tunnel was developed. It was shown that even though the starting points and optimization method are different, the objective function and optimum design variables converge to a value within a close range respectively, and consequently the optimum design program developed in this study is reliable and robust. 3D-design drawing can be drawn using automation design computer program developed in this study

• Journal of Pharmaceutical Investigation
• /
• v.40 no.1
• /
• pp.1-7
• /
• 2010

K-$BEtest^{(R)}$ is a well known program for bioequivalence test using a $2{\times}2$ design. Lee et al.(1998) and Park et al.(1999) suggested a $3{\times}3$ and $3{\times}2$ design, and also discussed their benefits. We developed a computer program, called BioEquiv, which can analyze some complex experimental designs such as, $3{\times}3$ design and $3{\times}2$ design including a standard $2{\times}2$ design. This program is a user-friendly one and overcomes the disadvantages of K-$BEtest^{(R)}$. The detailed statistical formula and structure of BioEquiv are presented with some examples. The comparison between K-$BEtest^{(R)}$ and BioEquiv are given with actual data analysis. BioEquiv is able to present a table of ANOVA test over some complex experimental designs. Moreover K-$BEtest^{(R)}$ and BioEquiv draw the same result when data consists of $2{\times}2$ design.

• Journal of the Korean Society for Precision Engineering
• /
• v.34 no.4
• /
• pp.281-285
• /
• 2017

Since the performance of the spring operating mechanism for a circuit breaker mainly depends on the dynamic behavior and mass of the coil spring, its dynamic analysis is required to evaluate the performance of the spring operating mechanism. In this study, a coil spring design program is developed for the spring operating mechanism. An experimental approach is used to find the variables satisfying the design constraints' requirements. The coil spring is formed by using a lumped mass spring model. This program offers reference data for the design of coil springs and for the spring operating mechanism.

• Journal of Korean Society of Steel Construction
• /
• v.12 no.5 s.48
• /
• pp.475-485
• /
• 2000

In this study, an automated optimum design program for steel box girder bridges has been developed for the optimum design of composite steel box girder bridges. The design constraints required for the optimum design of steel box girder bridges are based on the Korean standard bridge specification. Considering characteristics of steel box girder bridges, several approximation techniques, such as artificial constraint deletion, variable linking and stress reanalysis technique etc. are also introduced to enhance the efficiency of optimization. The developed program is mainly composed of major sub-system modules including structural analysis module using commercial structural analysis program such as RM-SPACEFRAME, optimum design module, pre-process module for friendly user input, and post-processor module for office automation. In addition, in order to demonstrate the efficiency and applicability of the developed optimum design program for steel box girder bridges, a few numerical examples are applied. Based on the results of the application, it may be stated that the automatic optimum design program developed in this study can be a prototype model for the developement of optimum design program for other type of bridge.

• Journal of Distribution Science
• /
• v.18 no.8
• /
• pp.65-74
• /
• 2020

Purpose: The purpose of study is to examine the effects of design thinking-based programs on creative potential, creativity and innovation behavior, as well as the mediating effect of creative potential and creativity. Research design, data and methodology: The study was conducted through a four-step process. First, the previous studies were investigated. Second, a total of three experts were reviewed to improve and supplement the program. Third, a workshop-based design thinking program was conducted four times. Fourth, the effectiveness of the program was reviewed through data analysis. Results: The design thinking-based program was found to have a statistically positive effect on creative potential, creativity, and innovation behavior. As another hypothesis of this study, by applying the design thinking-based program, it was statistically confirmed that creative potential has a direct, indirect effect, and a mediating effect on innovation behavior. Conclusions: These results provide usability for design thinking in terms of direction for creativity-based creative problem solving and innovation. Finally, design thinking can be used to develop and utilize new services and discover new ideas, especially improve the competitiveness of the company. In addition, it means that the level of innovation action can vary depending on the level of the individual's creative potential.

• Fashion & Textile Research Journal
• /
• v.1 no.2
• /
• pp.119-126
• /
• 1999

The purpose of this study was to serve as a basis for the creation of new design. For attaining the purpose, an investigation was made into the actual condition or problems of domestic and foreign fashion design, and fashion design information was acquired from the Internet. Then, taking the acquired information as the basic data for merchandising, an attempt was made to work out an outline by using the Corel-Trace program, a widely-used computer software, and to modify it by using the Corel-Draw program. The findings of this study were as below: 1) The informations provided by domestic home-pages were largely made up of fashion news and articles on the trend of fashion, but included few of picture report. Almost all of them weren't developed into a database by item or detail. The foreign fashion design web-site were numerous in number, providing diverse information. They offered not only moving images or picture report on fashion show, leading models, photo gallery or fashion trend, but up-dated data everyday. 2) A way to create a design to meet a designer's target is recommended in this study. At first, the fashion information acquired through computer network would be handled by the Corel-Trace program. After Bitmap image would be converted into Vector image, that would be modified by the Corel-Draw program to create a design to suit a designer's target.

• Proceedings of the Korea Society of Design Studies Conference
• /
• 2001.10a
• /
• pp.2.1-2
• /
• 2001

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2003.04a
• /
• pp.305-312
• /
• 2003

Recently, with a progressive development of hardware of computer, the internet and network technology, the environment of construction varies rapidly due to increase the complex form in structure shape and system. With variations, the CAD system for design and products also varies from 2D system to 3D system. This study mainly deals with the methodology of automatic connection design of 3D CAD system, steel connection system (XSteel) using macro. First, using design program in the steel connection system, Xsteel, the joint connection macro will be made up and established the detail classes of design. The next, Database Program (Converter Program) related to the general structural analysis program (MIDAS) and the steel connection program (Xsteel) is constructed for data interface between two programs. From this study, if the merits of 3D CAD system and converter program are utilized well, it is expected that the time needed in modeling and the amounts due to material loses decrease gradually.