• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.8
• /
• pp.746-752
• /
• 2009

In this paper, we deal with the development of an optimal design program for a triple-band PTFA(Planar Inverted-F Antenna) of 433 MHz, 912 MHz and 2.45 GHz by using evolution strategy. Generally, the resonance frequency of the PIFA is determined by the width and length of a U-type slot used. However the resonance frequencies of the multiple U slots are varied by the mutual effect of the slots. Thus the optimal width and length of U-type slots are determined by using an optimal design program based on the evolution strategy. To achieve this, an interface program between a commercial EM analysis tool and the optimal design program is constructed for implementing the evolution strategy technique that seeks a global optimum of the objective function through the iterative design process consisting of variation and reproduction. The resonance frequencies of the triple-band PIFA yielded by the optimal design program are 430 MHz, 910.5 MHz and 2.458 GHz that show a good agreement to the design target values.

• Proceedings of the KSME Conference
• /
• 2001.06c
• /
• pp.146-151
• /
• 2001

This study is an investigation for the ADS optimum design by using FEM. We write out program which express ADS perfectly and reduce the required time for correcting of model to the minimum in solution and manufacture result. We complete algorithm which can plan optimum forming of model by feedback error information in CAE. For that, we draw up ADS program which modeling rachet wheel by using visual LISP and telegraph to ANSYS, structural solution program, we can solve stress solution. Then we correct model by feedback date obtaining in solution process, repeat course following stress solution again and do modeling rachet wheel for optimum forming. That is our aim. As a result of experience, we can develope automatic design program using Visual LISP and exhibit ADS as modeling third dimension CAD for optimum design. Also, we develop optimum design algorithm using ADS and FEM. In rachet wheel, greatest equivalence stress originates in key groove comer and KS standard is proved the design for security.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.929-931
• /
• 2002

For design of On/Off type solenoid actuator, designer must have the experimental knowledge as well as general electromagnetic formulas to design object. It is possible for theoretical knowledge to do the out-line design, but it is impossible to optimal design without experimental knowledge which only can achieve through many repeated experiments. In addition, in present On/Off type solenoid actuator field, smaller, lightening, lower consumption power, high response time are effected as the most important design factor. So, experimental knowledge is more needed for optimal design of solenoid actuator. In this study, we developed a design program composed electromagnetic theories and experimental parameter values for inexperienced designers. And we proved the propriety of this program by experiments.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.12 no.1
• /
• pp.101-110
• /
• 2003

Motorcycle industry, for its competitive position, depends on part design technology. This part design has a bulky amount of data and asks the accumulation of advanced technical skill and experience, and fragmentary technical application is not enough to get to the kernel of a problem. Therefore, the improvement of proper productivity - the starting point of engineering design - and useful Design Methodology for products manufacturing are needed. Thus this paper is aimed to create a program that outputs dynamic characteristics of a vehicle when the data from fully understanding on motorcycle's brake system and induced formula for brake design are inputted. This paper is intended to show a creative design method by the thermal analysis data through FEM study and using shape design parameters derived from our programs.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1998.10a
• /
• pp.183-190
• /
• 1998

In this study, I-type girders, main members of a steel composite bridge, are designed by Load and Resistance Factor Design method as well as Allowable Stress Design method. The width, height web thickness and flange thickness of main girders are set as design variables. The design program connects optimization program ADS, which is coded with FORTRAN, and a main program coded with $C^{++}$. In this study, it is shown that in this particular steel composite bridge, the design by The Load and Resistance Factor Design method is more economical than that by The Allowable Stress Design method.d.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.6
• /
• pp.140-151
• /
• 2000

Springs for vehicle suspension control the vibration of a car and influence on the ridability, safety, and life of a car. in the paper, the computer aided design program has been developed, which design the leaf spring shape from the given specifications using basic theory and the expert\`s knowledge, and the design results are checked by the analysis theory in order to increase the accuracy, and feed back to the design input. For the purpose of easy use, this program consists of pull-down menu and interactive input mode. To prove the effectiveness of this program, two springs, of which one is symmetric, other asymmetric, are designed and analyzed, and the outputs are compared to the experiments. Considering the tolerance of the given specifications, the results are good.

• Archives of design research
• /
• v.15 no.1
• /
• pp.59-67
• /
• 2002

In accordance with the fast changing circumstance, universities are now reaching, beyond the education place of simple delivery of knowledge and exchange of information, to a place of developing a specialty program related with the region and industry to achieve a competitive edge in education. Through these academic-industrial collaboration program, special knowledge and human resources in the university are utilized in the society and it may contribute to the development of industry and breed of career people based upon the real job site can be achieved. In addition, through the practical operation of such developed program, university may contribute to the enhancement of the competitiveness of the corporation to the activation and acceleration of the regional economy and finally to the enhancement of competitiveness of national industry in international level. This study tries to develop 3 technical instruction and support program related with the legion and industry which may conform to the ideals of university and its goal of education and can provide a platform for the education that is closely related with the regional industry and real job site iud may cope actively with the upcoming knowledge society and fast changing regional circumstances. This study will make research and analyze needs of design support from the industry in order to develop a academic-industrial cooperative design support program for the furniture industry which conforms to the regional characteristic and feature and develop and present contents of program in three area of development of furniture design technology, build-up of furniture design information system and establishment of order based education system. The proposed program is supposed to be operated practically and effectively and contribute to the development of new product, to enhancement of company image and finally to the maximization of corporate profit. Also this study is epected to be used as an important material for establishment of order-based education system which confirms to the job site needs that may be analysed from feedback of product results and for practical learning.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.20 no.3
• /
• pp.25-32
• /
• 1983

Korea Institute of Machinery and Metals(KIMM) purchased a computer program for preliminary ship design from the ship Research Institute of Norway(NSFI). The program PROCAL(PROject CALculation) is described with other programs developed by NSFI such as SHIPMODEL, FLEET, SHIPSHAPE, SKRIN.

• Journal of the Korean Society of Costume
• /
• v.64 no.2
• /
• pp.50-69
• /
• 2014

Sustainability has been a big issue over the whole global industry lately and is an important fashion trend that reflects the modern phase of the time. The concept of sustainable fashion includes physical fashion products made from eco-friendly or recycle materials as well as ethical value such as corporate social responsibility for environment, labor or working condition. Fashion companies of advanced countries who are aware of the geo-environmental and ethical issues found that generating profits by setting trends and pursuing external beauty can no longer be the ultimate goal of fashion companies, and started to recognize the importance of sustainable fashion as a future-oriented trend. Not only fashion industry but also governments of advanced countries have been playing a leading role to educate the people regarding the importance of sustainable fashion and making large investments to foster industry specialists in educational institution. The aim of this study is to propose sustainable fashion design education program that fits the domestic university curriculum and government-leading education program in order to set the foundation for sustainable fashion industry. Thus, this study investigates successful cases of foreign government-led sustainable fashion education that can be introduced to improve domestic sustainable fashion education. The empirical study of the research is developing 12-15 week university level education program to foster specialists in sustainable fashion. The survey carried out by the students who participated in the program shows the change of perception on sustainable fashion. Developed university level program can be spread to municipal corporation, school of continuing education, and etc. in order to derive participation and problem perception of the citizens on sustainability. Developing systemized sustainable fashion design education program would be the first step of sustainable fashion by educating students who will take the leading role in the future fashion industry. Moreover, it can strongly influence future customer education as well as a special education inducing interest on sustainability in everyday life. A follow-up study is expected to serve as a foundation for sustainable fashion to take root successfully in the fashion industry.

• Journal of Digital Convergence
• /
• v.18 no.12
• /
• pp.259-266
• /
• 2020

The purpose of this study is to develop a extracurricular programs for enhancing creative self-efficacy of college student based on design thinking process, and to examine the effectiveness of the developed program. Since this study is also interested in suggesting the procedure for extracurricular program development and optimizing programs by derivation of improvements, a design-based research method was applied. Results are as follow; first, the procedure for extracurricular program development proceeds in three stages, second, the programs was developed as a 30-hour in-depth program and was conducted twice during winter and summer vacation, and the last, the program was confirmed that it has a positive effect on improving creative self-efficacy. This study contributed to providing a general procedure that can be referred when developing a program that reflects the context of the university, and to present the specific program and the case that use the test tool to confirm the effectiveness.