• 정보처리학회논문지D
• /
• 제15D권3호
• /
• pp.313-320
• /
• 2008

전형적인 소프트웨어 생명주기 모델은 결점이 추가되거나 제거되는 단계들의 일련의 순서로 구성되어 있다. 우리가 원하는 수준의 품질을 달성하기 위해서는 소프트웨어 개발 전 과정에서 결점 제거를 수행하여야 한다. 잘 알려진 단계기반 결점 프로파일은 Gaffney 모델이 있다. 이 모델은 결점 제거 프로파일이 Rayleigh 분포를 따르며 단계 인덱스 번호를 모수로 하고 있다. 실제 개발되는 소프트웨어에 Gaffney 모델을 적용시 제거된 결점이 최대값이 되는 점을 위치 모수가 표현하지 못하는 문제가 있다. 그러므로 Gaffney 모델은 실제 결점 프로파일을 표현하지 못한다. 본 논문은 2개의 다른 모델을 제시한다. 하나는 수정된 Gaffney 모델로 위치 모수를 교체하기 위해 Putnam의 SLIM 모델의 모수를 도입하였다. 다른 하나는 누적 결점 프로파일이 S자 형태를 보여 성장곡선 모델을 제시하였다. 제안된 모델은 5개의 다른 소프트웨어 프로젝트로부터 얻어진 결점 프로파일 분석에 의해 검증하였다. 실험 결과 제안된 모델이 Gaffney 모델 보다 좋은 결과를 얻었다.

• Tribology and Lubricants
• /
• 제19권6호
• /
• pp.357-364
• /
• 2003

The sub­surface stress field beneath the gear's contact surface caused by the contact pressure in lubricated condition has been calculated. To evaluate the influence of the clearance shape on the stress field, two kinds of tooth profile models were chosen. One is the conventional cylinder contact model and the other is the new numerical model. Love's rectangular patch solution was used to obtain the sub­surface stress field. The analysis results show that the sub­surface stress is quite dependent on both the contact pressure and the profile model. The maximum effective stress of the new model is lower than that of the old model. The depth where the maximum effective stress occurs in the new model is not proportional to the intensity of the external load.

• Wind and Structures
• /
• 제4권6호
• /
• pp.469-480
• /
• 2001

The Leipzig Wind Profile is generally known as a typical neutral planetary boundary layer flow. But it became clear from the present research that it was not completely neutral but weakly stable. We examined whether we could simulate the Leipzig Wind Profile by using a ($k-{\varepsilon}$) turbulence model including the equation of potential temperature. By solving analytically the Second Moment Closure Model under the assumption of local equilibrium and under the condition of a stratified flow, we expressed the turbulent diffusion coefficients (both momentum and thermal) as functions of flux Richardson number. Our ($k-{\varepsilon}$) turbulence model which included the equation of potential temperature and the turbulent diffusion coefficients varying with flux Richardson number reproduced the Leipzig Wind Profile.

• 한국도로학회논문집
• /
• 제15권6호
• /
• pp.103-111
• /
• 2013

PURPOSES : Previous Speed Profile reflects the patterns of speeds in sections of tangents to curves in the roads. However these patterns are uniform of speeds and Acceleration/Deceleration. In oder to supplement these shortcomings. this study made a new profile which can contain factors of Acceleration/Deceleration through theories of Previous Speed Profiles. METHODS : For sakes, this study developed the speed prediction model of Rural Multi-Lane Highways and calculated Acceleration/Deceleration by appling a Polynomial model based on developed speed prediction model. Polynomial model is based on second by second. Acceleration/Deceleration Profile is developed with the various scenarios of road geometric conditions. RESULTS : The longer an ahead tangent length is, The higher an acceleration rate in curve occurs due to wide sight distance. However when there are big speed gaps between two curves, the longer tangent length alleviate acceleration rate. CONCLUSIONS : Acceleration/Deceleration Profile can overview th patterns of speeds and Accelerations/Decelerations in the various road geometric conditions. Also this result will help road designer have a proper guidance to exam a potential geometric conditions where may occur the acceleration/deceleration states.

• International Journal of Computer Science & Network Security
• /
• 제22권11호
• /
• pp.265-271
• /
• 2022

Social media is a form of communication based on the internet to share information through content and images. Their choice of profile images and type of image they post can be closely connected to their personality. The user posted images are designated as personality traits. The objective of this study is to predict five factor model personality dimensions from profile images by using deep learning and neural networks. Developed a deep learning framework-based neural network for personality prediction. The personality types of the Big Five Factor model can be quantified from user profile images. To measure the effectiveness, proposed two models using convolution Neural Networks to classify each personality of the user. Done performance analysis among two different models for efficiently predict personality traits from profile image. It was found that VGG-69 CNN models are best performing models for producing the classification accuracy of 91% to predict user personality traits.

• 소음진동
• /
• 제7권6호
• /
• pp.909-918
• /
• 1997

Combustion oriented noise is a part of engine noise, which is mainly determined by the in-cylinder pressure profile and the structure attenuation of an engine. A numerical model for predicting the in-cylinder pressure profile and the resultant combustion noise developed by the use of a commercial code. The model is experimentally validated and updated based on the performance as well as the noise by considering the fuel injection timing, the fuel injection rate, Cetane number, intake temperature, and compression ratio. For providing a design guide of a fuel injector for a low combustion noise engine model, the optimal parameters of injection pressure profile, injection rate profile, and injection timing are determined, which gives the 5 dBA noise reduction.

• Korea-Australia Rheology Journal
• /
• 제21권3호
• /
• pp.149-153
• /
• 2009

Profile development of the melt spinning process of poly(ethylene terephthalate) (PET) was simulated by a numerical method under the consideration of two constitutive equations of Newtonian and upper convected Maxwell (UCM) models. The viscoelastic characteristics of the polymer were considered via UCM constitutive equation that considered relaxation time as a function of temperature and molecular weight. The UCM model predicted the diameter profile better than the Newtonian, while velocity development was slower than the Newtonian model. Viscoelasticity played an important role in accurately predicting diameter profile. However, even though neck-like deformation was observed in the UCM model, the exact position of the deformation under high speed spinning was not obtained.

• 대한기계학회논문집A
• /
• 제33권10호
• /
• pp.1099-1107
• /
• 2009

Numerical simulation and experimental study to evaluate the critical speed of the railway bogie according to the tread inclination of wheel profile were conducted using 1/5 scale model. It has been shown that the results of the critical speed analysis for the scale bogie model is very close to the test results using scale bogie model and the critical speed is decreased in proportion to the increase of equivalent conicity of wheel profile. Results of this study show that the scale model could be applied to research area relating to vehicle stability as an alternative to overcome the experimental problems caused by full scale test on the roller rig.

• 한국정밀공학회지
• /
• 제11권5호
• /
• pp.189-198
• /
• 1994

The achievable machining accuracy depends upon the level of the micro-engineering, and the today's accuracy targets are dimensional tolerances in the order of 10nm and surface roughness in the order of 1nm. Such requirements cannot be satisfied by the conventional machining processes. Single point diamond turning is the one of new techniques which can produce the parts with such accuracy limits. The aims of this thesis are to get a better understanding of the complex cutting process with a diamond tool and, consequently, to develope a predicting model of a turned surface profile. In order to predict the turned surface profile, a numerical model has been developed. By means of this model, the influence of the operational settings-the material properties of the workpiece, the geometry of the cutting tool and the dynamic behaviour of the lathe-and their influences via the cutting forces upon the surface roughness have been estimated.

• 한국컴퓨터정보학회논문지
• /
• 제21권12호
• /
• pp.115-124
• /
• 2016

In this paper, a method to generate the extended model automatically on the critical elements in enterprise system based real time distributed architecture as well as the platform specific model(PSM) for Microsoft(MS) .NET platform is proposed. The key ideas of this method are real time distributed architecture should performed with satisfying strict constraints on life cycle of object and response time such as synchronization, transaction and so on, and .NET platform is able to implement functionalities including before mentioned by only specifying Attribute Code and maximizing advantages of MDA. In order to realize the ideas, functionalities which should be considered enterprise system development are specified and these are to be defined in Meta Model and extended UML profile. In addition, after definition of UML profile for .NET specification, by developing and applying these into plug-in of open source MDA tool, and extended models are generated automatically through this tool. Accordingly, by using proposed specification technology, the profile and tools easily and quickly reusable extended model can be generated even though low level of detailed information for functionalities which is considered in .NET platform and real time distributed architecture. In addition, because proposed profile is MOF which is basis of standard extended and applied, UML and MDA tools which observed MOF is reusable.