• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.4
• /
• pp.684-695
• /
• 1992

The present study is concerned with the analysis of three-dimensional sheet metal forming process by the upper-bound method. For the analysis a systematic approach is necessary for the expression of geometric configuration of the deforming workpiece. In the present paper geometric configuration is constructed by three unit surfaces which are defined by sweeping the vertical section curves and boundary curve. The principal components of strain increment during the process is calculated directly from the change of geometric configuration for an arbitrary triangular element. The corresponding solution is found through optimization of the total energy consumption with respect to some parameters assumed in the velocity field and geometric profile. In order to verify the effectiveness of the present method, hydrostatic bulging of a rectangular disphragm is analyzed and the computation by the present method for the geometric shape renders the good result. From the comparison of the present results with the existing experimental results and elastic-plastic finite element solutions, good agreements have been obtained for the pressure curves, polar membrane strains and pressure distributions. The present method can thus be further applied to the analysis of other three-dimensional sheet metal forming processes.

• Journal of Fisheries and Marine Sciences Education
• /
• v.25 no.5
• /
• pp.1079-1087
• /
• 2013

The pharmacokinetics of florfenicol (FF) after oral administration was studied in the cultured olive flounder, Paralichthys olivaceus, using high performance liquid chromatography (HPLC). After single administration of FF (20 mg/kg body weight) by oral route in olive flounder ($700{\pm}50$ g, $23{\pm}1.5^{\circ}C$), the concentration in the serum was determined at 1, 5, 10, 15, 24, 30, 50 and 168 h post-dose. The kinetic profile of absorption, distribution and elimination of FF in serum were analyzed fitting to a two-compartment model by WinNonlin program. The area under the concentration-time curve (AUC), maximum concentration ($C_{max}$), time for maximum concentration ($T_{max}$) and elimination time were 22.51 ${\mu}g{\cdot}h/mL$, 0.84 ${\mu}g/mL$, 8.62 h and 447 h, respectively. The results of this study related to dosage and withdrawal times could be used for prescription of FF in field for the treatment of bacterial diseases in olive flounder.

• Journal of Energy Engineering
• /
• v.2 no.2
• /
• pp.200-207
• /
• 1993

A methanol reformer was designed and fabricated using a CuO-ZnO low temperature shift catalyst, and its operation characteristics have been studied for the phosphoric acid fuel cell (PAFC) power generation system. The type of reactor was annular Methanol was consumed both for heating and for reforming fuel. Contents of carbon monoxide produced from the reformer increased as the reaction temperatures increased, but decreased as the mole ratios of water to methanol(H$_2$O/CH$_3$OH) increased. At steady state operating conditional, temperature profile of the catalytic reactor of the reformer was well coincide with the model equation, and it took 50 minutes from start to the rated condition of the reformer. When the system was operated at 4/4 and 1/4 of load, thermal efficiencies of the system were 72.3% and 77%, respectively. When the PAFC system was operated with reformed gas in the range of 62 V-37.6 V and 0-147 A, the trend of I-V curve showed a typical fuel tell characteristic. At steady state condition, the flow rates of reforming and combustion methanol were 88.1 mol/h and 50.1 mol/h, respectively.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.8
• /
• pp.899-904
• /
• 2014

Thickness profiled blank is designed using optimization techniques for maximizing the bulged heights during the free bulging of Inconel 718. The thickness of the blank was described by the Bezier curve and the locations of the control points were used as the design variables for optimization. The maximization of the bulged heights within the limited strain range served as the objective function and constraints for optimization. The equivalent static loads method for non-linear static response structural optimization (ESLSO) was used and the result of the optimization revealed 22 increased bulged heights. A free bulging test using a blank with an optimized profile was conducted to verify the optimization process. The results were compared with those of numerical analysis in terms of bulged height and deformed shape.

• Smart Structures and Systems
• /
• v.19 no.5
• /
• pp.487-497
• /
• 2017

Semi-active devices use the building's own motion to produce resistive forces and are thus strictly dissipative and require little power. Devices that independently control the binary open/closed valve state can enable novel device hysteresis loops that were not previously possible. However, some device hysteresis loops cannot be obtained without active analog valve control allowing slower, controlled release of stored energy, and is presents an ongoing limitation in obtaining the full range of possibilities offered by these devices. This in silico study develops a proportional-derivative feedback control law using a validated nonlinear device model to track an ideal diamond-shaped force-displacement response profile using active analog valve control. It is validated by comparison to the ideal shape for both sinusoidal and random seismic input motions. Structural application specific spectral analysis compares the performance for the non-linear, actively controlled case to those obtained with an ideal, linear model to validate that the potential performance will be retained when considering realistic nonlinear behaviour and the designed valve control approach. Results show tracking of the device force-displacement loop to within 3-5% of the desired ideal curve. Valve delay, rather than control law design, is the primary limiting factor, and analysis indicates a ratio of valve delay to structural period must be 1/10 or smaller to ensure adequate tracking, relating valve performance to structural period and overall device performance under control. Overall, the results show that active analog feedback control of energy release in these devices can significantly increase the range of resetable, valve-controlled semi-active device performance and hysteresis loops, in turn increasing their performance envelop and application space.

• Korean Journal of Poultry Science
• /
• v.21 no.3
• /
• pp.175-182
• /
• 1994

An experiment was conducted to establish a large scale production method of anti-serum against chicken IgM and to profile the developmental changes of serum IgM levels during the feeding period(from hatching to 7 weeks of age) in broiler chicks. Blood samples were taken from Hubbard chicken at the age of hatching, three days of age, and weekly thereafter till to 7 weeks of age. The pure IgM was isolated from ammonium sulfate treated chicken serum by both sephadex G-200 and sepharose CL-6B chromatography. The breaking-through peak containing IgM appeared from the fraction 26 to 28. These fractions consisted mainly of IgM when tested by anti-chicken IgM(Nordic, Netherlands). Immunized with the heavy chain of this purified IgM, the rabbit immune sera(anti-chicken IgM) were formed a reaction only with the purified chicken IgM. The quantitative assay of serum IgM were carried by RID method. The optimal time for diffusion was 14 hours and the coefficient of determination($R^{2}$) for regression equation of standard curve was 0.992. It was observed that IgM concentrations were the highest at hatching(3.23 mg /mL), after that decreased gradually. From 2 to 5 weeks of age the levels unchanged(2.0 ~ 2.3mg /mL), and gradually decreased to 7 weeks of age(1.3 mg /mL).

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.6
• /
• pp.547-555
• /
• 2016

The wheel wear of a railway vehicle is mainly generated when maneuvering on a curved track. The change in the wheel profile affects the dynamic stability of the vehicle. In this analysis, the wheel wear volume was calculated while changing the velocity and radius of the curve to analyze the wear characteristics of a wheel at a curved section. The wear index was calculated from a vehicle dynamic analysis based on a multibody dynamics analysis and wear volume from a wear model by British Rail Research. The wear volume at a radius of 300 m is dominant compared with other radii. The wear volume was calculated by assigning different coefficients of friction to the tread and flange of the wheel to investigate the effect of lubrication on the wear characteristics. The effect of the improvement by lubrication is calculated by varying the radius of the track, and is assessed on an actual urban railway section.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1998.11a
• /
• pp.122-122
• /
• 1998

Propentofylline (PPF), a xanthine derivative, has been reported to be effective for the treatment of both vascular dementia and Alzheimer's disease. The elimination half-life of PPF was ranged from 15 to 45 min in rabbit and human, and PPF was rapidly disappeared from the blood. The objective of this experiment is to investigate whether xanthine analogues have effects on the profile of plasma concentration and metabolism of PPF. Caffeine (50 mg/kg, ip) was treated to Sprague-Dawley rats for consecutive 7 days and PPF was intravenously administered to rats 2 hr after the last dose of caffeine. In the other group, PPF was intravenously administered to rats 1 hr after a single dose of pentoxifylline (50 mg/kg, iv). Control group was treated with saline vehicle for the same period as in treatment groups. Blood was withdrawn at specific time intervals. PPF and one of its metabolite (POH) in plasma were determined by gas chromatography/nitrogen phosphorus detector. Plasma concentrations and pharmacokinetic parameters were compared between groups. The area under the curve (AUC) of PPF in rats treated sub chronically with caffeine was significantly decreased compared to control rats. Caffeine treatment results in a significant increase of total body clearance. The AUC of POH was significantly decreased in the caffeine-treated group. A single dose of pentoxifylline has no effect on the phramacokinetics of PPF. Reduction of the AUCs of PPF and POH both suggests that caffeine may increase the excretion of PPF with no affecting the metabolism of PPF to POH.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.110-110
• /
• 2011

The nanomechanical properties of fully lithiated and unlithiated silicon nanowire deposited on silicon substrate have been studied with atomic force microscopy. Silicon nanowires were synthesized using the vapor-liquid-solid process on stainless steel substrates using Au catalyst. Fully lithiated silicon nanowires were obtained by using the electrochemical method, followed by drop-casting on the silicon substrate. The roughness, derived from a line profile of the surface measured in contact mode atomic force microscopy, has a smaller value for lithiated silicon nanowire and a higher value for unlithiated silicon nanowire. Force spectroscopy was utilitzed to study the influence of lithiation on the tip-surface adhesion force. Lithiated silicon nanowire revealed a smaller value than that of the Si nanowire substrate by a factor of two, while the adhesion force of the silicon nanowire is similar to that of the silicon substrate. The Young's modulus obtained from the force-distance curve, also shows that the unlithiated silicon nanowire has a relatively higher value than lithiated silicon nanowire due to the elastically soft amorphous structures. The frictional forces acting on the tip sliding on the surface of lithiated and unlithiated silicon nanowire were obtained within the range of 0.5-4.0 Hz and 0.01-200 nN for velocity and load dependency, respectively. We explain the trend of adhesion and modulus in light of the materials properties of silicon and lithiated silicon. The results suggest a useful method for chemical identification of the lithiated region during the charging and discharging process.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.11
• /
• pp.3473-3479
• /
• 2009

The pharmacological profile of KR-31081, a newly synthesized AT1 receptor antagonist, was evaluated in pithed rats, conscious renal hypertensive rats (RHRs) and conscious furosemide-treated beagle dogs. In pithed rats, KR-31081 (i.v.) induced a non-parallel right shift in the dose-pressor response curve to angiotensin II (ID50: 0.05 mg/kg) with a dose-dependent reduction in the maximum responses; this antagonistic effect was about 40 times more potent than losartan (ID50: 1.74 mg/kg) which showed competitive antagonism. KR-31081 did not alter the responses induced by other agonists such as norepinephrine and vasopressin. In RHRs, orally given KR-31081 produced a dose-dependent and long-lasting (>24 h) antihypertensive effect with a higher potency to losartan (ED20: 0.30 and 3.36 mg/kg, respectively). In furosemide-treated dogs, orally given KR-31081 produced a dose-dependent and long-lasting (>8h) antihypertensive effect with a rapid onset of action (time to Emax: 1-1.5 h) and 20-fold greater potency than losartan (ED20: 0.41 and 8.13 mg/kg, respectively). These results suggest that KR-31081 is a potent, orally active AT1 receptor antagonist useful for the research and diagnostic tools as an added exploratory potential.