• Journal of the Korean Vacuum Society
• /
• v.15 no.2
• /
• pp.168-172
• /
• 2006

GaN nucleation layers were grown by hydride vapor phase epitaxy (HVPE) and the effect of growth temperature on the structural properties of GaN nucleation layers for nanorods was investigated by synchrotron x-ray scattering and Atomic Force Microscopy (AFM). For the samples grown at different temperatures, two-component rocking profiles of (002) GaN Bragg peaks for the GaN nucleation layers were observed with one very sharp and the other broad. It was shown that the two-component rocking profile could be qualitatively explained by surface morphology, which was in good agreement with AFM result, from which we could conclude that relatively low temperature is favorable for GaN nanorods formation.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.19 no.4
• /
• pp.277-287
• /
• 1999

Quasi-static tests such as monotonic tension and loading/unloading tension were performed to investigate the bond characteristics and the failure processes for the T-joint specimens made from fiber/epoxy composite material. Two types of specimens, each consists of two components, e. g. skin and frame. were manufactured by co-curing and secondary bonding. During the monotonic tension test, AE instrument was used to predict AE signal at the initial and middle stage of the damage propagation. The damage initiation and progression were monitored optically using m (Charge Coupled Device) camera. And the internal crack front profile was examined using ultrasonic C-scan. The results indicate that the loads representing the abrupt increase of the AE signal are within the error range of 5 percent comparing to the loads shown in the load-time curve. Also it is shown that the initiation of crack occurred in the noodle region for both co-cured and secondarily bonded specimen. The final failure occurred in the noodle region for the co-cured specimen. but at the skin/frame termination point for the secondarily bonded specimen. Based on the results, it was found that two kinds of specimen show different failure modes depending on the manufacturing methods.

• International Journal of Fluid Machinery and Systems
• /
• v.4 no.3
• /
• pp.334-340
• /
• 2011

Turbo-pumps have weak points, such as the pumping operation is unstable on the positive slope of the head curve and/or the cavitation occurs at the low suction head. To improve simultaneously both weak points, the first author invented the unique pumping unit composed of the tandem impellers and the peculiar motor with the double rotational armatures. The front and the rear impellers are driven by the inner and the outer armatures of the motor, respectively. Both impeller speeds are automatically and smartly adjusted in response to the pumping discharge, while the rotational torques between both impellers/armatures are counter-balanced. Such speeds contribute to suppress successfully not only the unstable operation at the low discharge but also the cavitation at the high discharge, as verified with the axial flow type pumping unit in the previous paper. Continuously, this paper investigates experimentally the effects of the tandem impeller profiles on the pump performances and the rotational speeds against the discharge, using the impellers whose loads are low and/or high at the normal discharge. The worthy remarks are that (a) the unstable operation is suppressed as expected and the shut off power is scarcely large in the smart control, (b) the blade profile contributes to determine the discharge giving the maximum/minimum rotational speed where the reverse flow may incipiently appears at the front impeller inlet, (c) the tandem impeller profiles scarcely affect the rotational speeds, while the loads of the front and the rear impellers are same, but (d) the impeller with the low load must run faster and the impeller with the high load must run slower at the same discharge to take the same rotational torque, and (e) the reverse flow at the inlet and the swirling velocity component at the outlet of the front impeller with the high load require making the rotational speed of the rear impeller with low load fairly faster at the lower discharge.

• Korean Journal of Food Science and Technology
• /
• v.24 no.3
• /
• pp.294-299
• /
• 1992

This study was to examine the effect of functional properties of soy protein isolate(SPI) and qualities of soybean curd upon proteolytic hydrolysis. SPI was hydrolyzed using proteolytic enzyme, bromelain. The protein content of SPI by microkjeldahl method was 84% and the degree of hydrolysis in modified soy protein isolate(MSPI) was 2.7%. The solubility of MSPI was higher than that of control at various pH tested and proteolytic hydrolysis was increased emulsion formation and foam expansion while decreased emulsion stability, foam stability and calcium precipitation. Modified soybean curdI, standard soybean milk: Modified soybean milk=3:1, was soft and springy soybean curd when the texture properties of soybean curd were tested by texture profile analysis using Instron and sensory evaluation. The rheological model of soybean curds was investigated by stress relaxation test. The analysis of relaxation curve revealed that the rheological behavior of soybean curds could be expressed by 7-element generalized Maxwell model. The equilibrium modulus and modulus of elasticity decreased as the ratio of modified soybean milk was increased.

• Biomolecules & Therapeutics
• /
• v.13 no.2
• /
• pp.118-122
• /
• 2005

The objective of the present investigation was to study pharmacokinetics of promethazine in Korean healthy subjects using a validated HPLC method. The HPLC analysis was performed on a Capcell Pak CN column with a mixture of acetonitrile-0.02M potassium dihydrogen phosphate (42:58, v/v, pH 6.0) and the analyte was quantified with UV detection at 251 nm. The calibration curve of the drug was linear over the range of 1-40ng/mL in human serum and the limit of quantification (LOQ) was 1 ng/mL. This analytical method was validated and shown to be specific, accurate, precise and reproducible. This method was applied to pharmacokinetic study of promethazine in Korean healthy volunteers following an oral administration of two 25 mg Himazin tablets (50 mg promethazine ${\cdot}$HCI) after overnight fasting. Serum samples were collected at given intervals over a 36-hour period (12 points) and pharmacokinetic parameters were determined from serum concentration-time profile using WinNonlin program. The estimated $AUC_{0__\infty}$, $AUC_{0_\infty}$, $C_{max}$, $T_{max}$ and $t_{1/2}$ of promethazine obtained from Korean healthy subjects were 103.84 ${\pm}$84.30 ng${\cdot}$hr/mL, 87.94${\pm}$81.02 ng${\cdot}$hr/mL, 13.43${\pm}$10.92 ng/mL, 2.00${\pm}$1.16 hr and 5.88${\pm}$3.47 hr, respectively.

• The Korean Journal of Pharmacology
• /
• v.26 no.1
• /
• pp.77-82
• /
• 1990

The effects of phenothiazine derivatives and calcium on the thermotropic phase transition of bilayers in dipalmitoyl phosphatidylcholine (DPPC) and dipalmitoyl phosphatidic acid (DPPA) liposomes were investigated with differential scanning calorimeter (DSC). Bilayers underwent an abrupt organizational changes at a characteristic temperature when heated. Such temperature-dependent transition was particularly striking and sharp in the bilayers prepared from pure phospholipids. The ability of phenothiazine derivatives to modify the phase transition of phospholipids liposomes was measured by a broadening of the phase transition profile, that transition began to appear at lower temperature than which occurs in untreated liposomes. Calcium ion caused a large upward shift in the transition temperature of DPPC:DPPA (34:66mol%) liposomes. When the liposomes were first incubated with calcium ion followed by phenothiazine derivatives, disappearance of the broad curve centering at $73^{\circ}C$ indicated displacement of calcium ion by phenothiazine derivatives at the anionic site. It is supposed that calcium ion and phenothiazine derivatives might compete with each other on the head group of acidic phospholipid.

• Journal of Biomedical Engineering Research
• /
• v.33 no.4
• /
• pp.169-176
• /
• 2012

Tumor cell morphology is closely related to its migratory behaviors. An active tumor cell has a highly irregular shape, whereas a spherical cell is inactive. Thus, quantitative analysis of cell features is crucial to determine tumor malignancy or to test the efficacy of anticancer treatment. We use 3D time-lapse phase-contrast microscopy to analyze single cell morphology because it enables to observe long-term activity of living cells without photobleaching and phototoxicity, which is common in other fluorescence-labeled microscopy. Despite this advantage, there are image-level drawbacks to phase-contrast microscopy, such as local light effect and contrast interference ring. Therefore, we first corrected for non-uniform illumination artifacts and then we use intensity distribution information to detect cell boundary. In phase contrast microscopy image, cell is normally appeared as dark region surrounded by bright halo ring. Due to halo artifact is minimal around the cell body and has non-symmetric diffusion pattern, we calculate cross sectional plane which intersects center of each cell and orthogonal to first principal axis. Then, we extract dark cell region by analyzing intensity profile curve considering local bright peak as halo area. Finally, we calculated the Fourier descriptor that morphological characteristics of cell to classify tumor cells into active and inactive groups. We validated classification accuracy by comparing our findings with manually obtained results.

• Electrical & Electronic Materials
• /
• v.9 no.5
• /
• pp.463-469
• /
• 1996

The double insulating layer consisting of anodic oxide and ZnS was formed for HgCdTe metal insulator semiconductor(MIS) structure. ZnS was evaporated on the anodic oxide grown in H$_{2}$O$_{2}$ electrolyte. Recently, this insulating mechanism for HgCdTe MIS has been deeply studied for improving HgCdTe surface passivation. It was found through TEM observation that an interface layer is formed between ZnS and anodic oxide layers for the first time in the study of this area. EDS analysis of chemical compositions using by electron beam of 20.angs. in diameter and XPS depth composition profile indicated strongly that the new interface is composed of ZnO. Also TEM high resolution image showed that the structure of oxide layer has been changed from the amorphous state to the microsrystalline structure of 100.angs. in diameter after the evaporation of ZnS. The double insulating layer with the resistivity of 10$^{10}$ .ohm.cm was estimated to be proper insulating layer of HgCdTe MIS device. The optical reflectance of about 7% in the region of 5.mu.m showed anti-reflection effect of the insulating layer. The measured C-V curve showed the large shoft of flat band voltage due to the high density of fixed oxide charges about 1.2*10$^{12}$ /cm$^{2}$. The oxygen vacancies and possible cationic state of Zn in the anodic oxide layer are estimated to cause this high density of fixed oxide charges.

• Korean Journal of Veterinary Research
• /
• v.42 no.4
• /
• pp.485-493
• /
• 2002

The purpose of this study was to develope a computer program to help with gross diagnosis of protein-energy balance and feeding management practice and with the prediction about the risk possibility of productive disease such as reproductive and metabolic disorders by evaluating fat, protein, and milk urea nitrogen (MUN) from individual cow milk in dairy herd Somatic cell counts also represent the condition of udder health. The principal flow charts of this program was to check on herd management, sampling the composite milk, analysis the milk composition, conversion of data from milking equipment to program, input and analysis of data in program, and report. This program is compatible with window 95/98 system. The major analytical elements of this program were presented as; the profile of herd lactation curve analysis of the test-day milk production level, the distribution of somatic cell count, the fat to protein ratio to evaluate body energy balance, and the interpretation of dietary protein-energy balance by milk protein and MUN contents for individual cows. This program using milk fat, protein, MUN, and somatic cell counts will serve as a monitoring tool for the protein-energy balance and the feeding management practice, and for distribution of mastitis in individual cows. It will also be used to manage the nutritional and reproductive disorders and mastitis at the farm level.

• The korean journal of orthodontics
• /
• v.41 no.2
• /
• pp.138-146
• /
• 2011

The purpose of this article is to introduce a new virtual orthodontic treatment (VOT) system, which can be used to construct three-dimensional (3D) virtual models, establish a 3D virtual setup, enable the placement of the virtual brackets at the predetermined position, and fabricate the transfer jig with a customized bracket base for indirect bonding (IDB) using the stereolithographic technique. A 26-year-old woman presented with anterior openbite, crowding in the upper and lower arches, and narrow and tapered upper arch, despite having an acceptable profile and balanced facial proportion. The treatment plan was rapid palatal expansion (RPE) without extraction. After 10 days of RPE, sufficient space was obtained for decrowding. After a 10-week retention period, accurate pretreatment plaster models were obtained using silicone rubber impression. IDB was performed according to the protocol of the VOT system. Crowding of the upper and lower arches was effectively resolved, and anterior openbite was corrected to normal overbite. Superimposition of the 3D virtual setup models (3D-VSM) and post-treatment 3D virtual models showed that the latter deviated only slightly from the former. Thus, the use of the VOT system helped obtain an acceptable outcome in this case of mild crowding treated without extraction. More cases should be treated using this system, and the pre- and post-treatment virtual models should be compared to obtain feedback regarding the procedure; this will support doctors and dental laboratory technicians during the learning curve.