• Korean Journal of Applied Biomechanics
• /
• v.20 no.4
• /
• pp.365-372
• /
• 2010

The purpose of this study were to analyze the changes in kinematic and kinetic parameters and to find biomechanical benefits of Nordic Walking and normal gait performed under the same velocity. Nine participants(age: $26.73{\pm}3.28$ year, height: $182.45{\pm}4.62\;cm$, weight: $76.59{\pm}6.84\;kg$) was chosen. The velocity of gait was set by 5.75 km/h which was made by a Nordic Walking professional. The data were collected by using VICON with 8 cameras to analyze kinematic variables with 200 Hz and force platform to analyze kinetic variables with 2000 Hz. The results of this study were as follows. First, when compared with Normal gait, Nordic Walking group showed decreased Plantarflexion angle and ROM. Second, Nordic Walking group showed decreased knee flexion angle and ROM. Third, Nordic Walking group showed increased hip joint movement. Fourth, Nordic Walking group showed higher active GRF but decreased loading rate from delayed Peak Vertical GRF time and increased impulse. Fifth, Nordic Walking group showed longer ground contact time. Through this study, we found that Nordic Walking showed higher stability and efficiency during gait than normal gait and that Nordic Walking may help people who have walking difficulties.

• Korean Journal of Applied Biomechanics
• /
• v.24 no.4
• /
• pp.339-347
• /
• 2014

The purpose of this study was to investigate joint torques of lower body segments on professional golfers. Three dimensional swing analysis was conducted on the seven subjects. Each subject was asked to swing with 45 inches of Callaway driver, where two force plates (9286AA, Kistler, Switzerland) were built, with his normal speed and tempo. The resultant joint moments of the lower extremities were computed using the kinematic variables of the segments, anthropometric measures and the ground reaction force data by inverse dynamics method. Based on the results of this study, the following conclusions were drawn; It was found that the left ankle joint torque at 3rd phase was increased toward extension on the X-axis and abduction on the Y-axis. The left knee joint torque was alternated from flexion to extension direction in order to lower down the body weight at the beginning of the downswing. The lumbar joint torque was alternated from flexion to extension in order to speed up the upper body rotation which could increase the club head speed ultimately.

• Korean Journal of Applied Biomechanics
• /
• v.19 no.3
• /
• pp.549-555
• /
• 2009

The purpose of this study was to quantify the isokinetic peak torque and range of motion at the shoulder in 8 national male volleyball players who played during the 2008 professional leagues. In this study the strength and range of motion data in the internal rotation(IR) and external rotation(ER) of shoulder joint were measured with isokinetic measurement system(Biodex Inc) and motion analysis system (Simi motion system Inc.) from 3 volleyball players with atrophy of the infrasupinatus and 5 volleyball players without atrophy of the infraspinatus. Peak torques were determined using isokinetic measurement on the shoulder joint rotator at the point of angular velocities of $60^{\circ}$/s. Significant difference was found in the peak torque, IR / ER ratio and the range of motion through assessment of the dominant shoulder between two groups. we recommended functional exercises that improve both external rotators strength and stretching exercise for internal rotation in the dominant side during the prevention programs in volleyball players.

• Journal of Fashion Business
• /
• v.14 no.4
• /
• pp.111-131
• /
• 2010

The purpose of this study is to compare the difference between Beijing and Seoul in women's winter street fashion, and suggest strategic methods to improve new competitiveness of the Korean fashion industry. The research was conducted by literature review and empirical research and photographs of winter street style were directly taken by a digital camera from December 28, 2008 to January 8, 2009. The survey was made at 9~11 A.M., 12~1 P.M., and 3~5 P.M. during midweek and weekend. Then 530 photographs(265 each city) of women of the 20s and 30s were selected by random sampling and five fashion professional including this researcher classified styles in accord with majority opinion on careful investigation. The results of comparing the 2008 winter street fashion in Beijing and Seoul show the highest frequency of easy casual style. In detail, while high frequency was found in romantic, classic, feminine, and romantic casual style in Seoul, easy casual and character casual style was prevalent in Beijing. The same frequency of sport casual style illustrates no differences between two cities. Unlike the prediction of the fashion industry that the preference of sport casual style would be increased under the influence of the Beijing Olympics 2008, high preference of easy casual reflects that Chinese women were more sensitive to the changes of their consumption trend. In clothing color, the achromatic color was prevalent in street style in Seoul, whereas multi-color were preferred in Beijing, suggesting a great difference. In the case of accessories, both areas preferred a tot bag but Beijing women preferred active shoulder bag and cross bag in sport casual style. Seoul women preferred pumps and sneakers, whereas Beijing women liked boots of different length according to style.

• Korean Journal of Applied Biomechanics
• /
• v.29 no.4
• /
• pp.255-261
• /
• 2019

Objective: The purpose of this study was to investigate differences of shock attenuation strategies between double-leg and single-leg landing on sagittal plane using statistical parametric mapping. Method: Nine healthy female professional soccer players (age: 24.0±2.5 yrs, height: 164.9±3.3 cm, weight: 55.7±6.6 kg, career: 11.2±1.4 yrs) were participated in this study. The subjects performed 10 times of double-leg and single-leg landing from the box of 30 cm height onto force plates respectively. The ground reaction force, angle, moment, angular velocity, and power of the ankle, knee, and hip joint on sagittal plane was calculated from initial contact to maximum knee flexion during landing phase. Statistical parametric mapping was used to compare the biomechanical variables of double-leg and single-leg landing of the dominant leg throughout the landing phase. Each mean difference of variables was analyzed using a paired t-test and alpha level was set to 0.05. Results: For the biomechanical variables, significantly increased vertical ground reaction force, plantarflexion moment of the ankle joint, negative ankle joint power and extension moment of the hip joint were found in single-leg landing compared to double-leg landing (p<.05). In addition, the flexion angle and angular velocity of the knee and hip joint in double-leg landing were observed significantly greater than single-leg landing, respectively (p<.05). Conclusion: These findings suggested that negative joint power and plantarflexion moment of the ankle joint can contribute to shock absorption during single-leg landing and may be the factors for preventing the musculoskeletal injuries of the lower extremity by an external force.

• Journal of the Korean Data and Information Science Society
• /
• v.23 no.3
• /
• pp.505-514
• /
• 2012

This study is for effectiveness of golf skills to average score using path analysis in Professional golf association. The variables in this study were that seven independent variable were driving accuracy, green in regulation, driving distance, sand save ratio, scrambling, putting average, and two endogenous variables were birdie average, bogey average, and dependent variable was the scoring average. To analyze these variables, path analysis was used through AMOS 18.0 program and Alpha level sets at.05. As the result, the final model had significant goodness-of-fit (GFI=.989, RMSEA=.044, TLI=.991, CFI=.998) and showed that green in regulation, driving distance, sand save ratio, scrambling, and putting average significantly affected average score directly. Especially, the scrambling was the highest affectation to average score and the sand save ratio was the lowest affectation to the average score.

• Korean Journal of Applied Biomechanics
• /
• v.31 no.2
• /
• pp.148-153
• /
• 2021

Objective: It is to extract training items that have a high relationship with the improvement of weightlifting records through correlation and regression analysis between training methods used commonly in the field and Snatch records and jerk records. Through this, it is intended to promote training efficiency to improve the records of weightlifters. Method: For 90 elite weightlifters of the professional teams, 4 groups (lightweight (30 people): 61 kg, 67 kg, 73 kg., middleweight (30 people): 81 kg, 89 kg, 96 kg., heavyweight (30 people): 102 kg, 109 kg, +109 kg., the whole group (90 people)) were divided. At the significance level of 0.05, correlation analysis and linear regression analysis were performed between record of training methods used widely in the field and Snatch records and Jerk records. Results: First, the better the record in Jerk, the better the Snatch record. Second, the three training methods HS, ForceS and WP performed in the field were all found to be important factors related to the improvement of Snatch record. Third, In the jerk where there are more types of training than Snatch, three training methods (HC, ForceS, BPP) appeared to be an important training method for improving the jerk record. Conclusion: While many training methods have been devised and carried out in the field, 3 types of training (HS, ForceS, WP) for improving Snatch record and 3 types of training (HC, ForceS, BPP) for improving Jerk record was found to be the most influential training method. Since all of them showed a large value of explanatory power by regression analysis, it is considered that this study is meaningful in that it can promote training efficiency by simplifying although there are many types of training for athletes.

• Journal of Arbitration Studies
• /
• v.33 no.1
• /
• pp.3-22
• /
• 2023

The purpose of this study is to present implications by analyzing the Swiss Federal Court's annulment of the arbitration Awards in Court of Arbitration for Sport(CAS). As international interest in the sports sector increases, related disputes are also increasing. Therefore, the role of CAS specializing in sports disputes is becoming very important. In particular, the Swiss federal court's annulment of the arbitral awards made by the CAS could contribute significantly to the development of sports arbitration in the future. Looking at the case analyzed in this study, first of all, it is about the partiality of the arbitrator. The court judged that the arbitrator posted and shared racist articles on SNS, which could be sufficiently biased. Next, it is about the uncertainty of the arbitration clause. The arbitral award was finally canceled due to the issue of whether the CAS could make an arbitral award with jurisdiction over a clause that includes both dispute resolution through a sports organization and dispute handling in a national court. As a result of the analysis of this study, in the case of unclear arbitration provisions, it will be necessary to prepare an arbitration agreement. In addition, in the case of unclear arbitration provisions, it will be necessary to prepare a post-arbitration agreement. Finally, in order to revitalize sports arbitration, it will be necessary to train professional arbitrators in Korea, support them to work internationally, and establish specialized arbitration institutions.

• Korean Journal of Applied Biomechanics
• /
• v.17 no.2
• /
• pp.177-185
• /
• 2007

Even though there were no clear definitions of the short game and short game distance, short game capability is crucial for a good golf score. Generally, chip shot and pitch shot are regarded as two principal components of the short game. Chip shot is a short, low trajectory shot played to the green or from trouble back into play. Pitch shot is a high trajectory shot of short length. Biomechanical studies were conducted usually to analyze full swing and putting motions. The purpose of the study was to reveal the kinematical differences between professional golfers' 30 yard $53^{\circ}wedge$ chip shot and $56^{\circ}wedge$ pitch shot motions. Fifteen male professional golfers were recruited for the study. Kinematical data were collected by the 60 Hz three-dimensional motion analysis system. Statistical comparisons were made by paired t-test, ANOVA, and Duncan of the SPSS 12.0K with the $\alpha$ value of .05. Results show that both the left hand and the ball were placed left of the center of the left and right foot at address. The left hand position of the chip shot was significantly left side of that of the pitch shot. But the ball position of the pitch shot was significantly right side of that of the chip shot. All body segments aligned to the left of the target line, open, at address. Except shoulder, there were no significant pelvis, knee, and feet alignment differences between chip shot and pitch shot. These differences at address seem for the ball height control. Pitch shot swing motions(the shoulder and pelvis rotation and the club head travel distance) were significantly bigger than those of the chip shot. Club head velocity of the pitch shot was significantly faster than that of the chip shot at the moment of impact. This was for the same shot length control with different lofted clubs. Swing motion differences seem mainly caused by the same shot length control with different ball height control.

• Korean Journal of Applied Biomechanics
• /
• v.16 no.1
• /
• pp.81-88
• /
• 2006

Present study is to know the relation with throwing speed according to the uniform torque by the shoulder joint, over 20 persons of professional baseball, and were measured the uniform torque by the shoulder joint accordance with throwing speed between (A-low speed) and (B-high speed) of each group. In the present study, three components were measured, and analyzed with having an approximated output value appearing by changing angular velocity, and in $30^{\circ}/sec$, the maximum strength of muscles was measured, and in$210^{\circ}/sec$, the points of endurance strength of muscles were measured and analyzed, and the following result could be obtained. 1. In muscles strength (peak torque)of inner rotation, and outer rotation for respect to each speed of shoulder joint, though there did not appear outstanding difference between A group and B group in the $30^{\circ}/sec$, it showed that group B has priority in a little. Also in outer rotation by shoulder joint, though there appeared the same difference between A group and B group, B group is tended to be prior to A group in a little. 2 In the view of muscles strength (peak torque)of inner rotation, and outer rotation for respect to each speed of shoulder joint, though there did not appear outstanding difference between A group and B group in the $30^{\circ}/sec$, it showed that group B has priority in a little. Also in outer rotation by shoulder joint, though there appeared the same difference between A group and B group, B group is tended to be prior to A group in a little. 3. In the view of muscles strength(peak torque)of inner rotation, and outer rotation for respect to each speed of shoulder joint, though there did not appear outstanding difference between A group and B group in the $30^{\circ}/sec$, it showed that B group has priority in a little. Also in outer rotation by shoulder joint, though there appeared the same difference between A group and B group, B group is tended to be prior to A group in a little. 4. In the view of peak torque for respect to the weight accordance with each velocity of shoulder joint, there did not appear outstanding difference between A group and B group. In outer rotation by the shoulder joint, there was not appeared clear difference between A group and B group. 5. In the concern of the peak torque for respect to the weight accordance with each velocity of shoulder joint, there did not appear outstanding difference between A group and B group in $30^{\circ}/sec$. In outer rotation by the shoulder joint, there was not appeared clear difference between A group and B group. 6. In the concern of the peak torque for respect to the weight accordance with each velocity of shoulder joint, there did not appear outstanding difference between A group and B group in $210^{\circ}/sec$. In outer rotation by the shoulder joint, there was not appeared clear difference between A group and B group. As conclusion, there did not appear a correlation of uniform torque by shoulder joint versus the speed throwing by a pitcher of professional base ball.