• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2007.12a
• /
• pp.337-339
• /
• 2007

The productivity of container terminal is usually regarded same as the productivity of quay crane. Operation of quay crane for the export is started from picking up a container in yard block. In doing so, smooth flow of container is vital to maximize the productivity of quay crane. Improvement of quay crane's productivity means improvement of entire productivity in container terminal, which reinforces the competitiveness of terminal consequently. Setting effective plan is essential to improve work flow from yard to quay crane. For optimal plan, it is necessary to gather information about exact time schedule of come-and-go containers for loading, amount of containers that will be come to terminal. Generally, the arrival time of containers and the amount of containers are definite and predictable. However, in the case of export container, the arrival time of containers is random and unpredictable. This study examines the pattern of coming-in containers as time goes in container yard and provides the solution to how to plan export yard considering the change of state in terminal and adapt it to container yard plan

• Journal of Navigation and Port Research
• /
• v.31 no.9
• /
• pp.771-778
• /
• 2007

A container terminal gate is not only an entrance of containers, but also the first input point of containers' information. Therefore, to achieve the accuracy of container information, there are various containers' numbers recognition methods used. Gate productivity can significantly vary depending upon those recognition methods. Recently, RFID which is one of the u-IT businesses run by the Korean government is under consideration for application to the gate as an automatic system. If RFID is used, it is expected to have both the qualitative benefits through avoiding defects of other systems and the quantitative benefits by improving productivity. Hence, this study aims to provide some insight on the benefits of RFID, and to compare productivity of the existing gate system with the RFID gate system based on computer simulation.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.1
• /
• pp.237-246
• /
• 2015

In this paper, Improved productivity models of container terminal are provided by utilizing a simulation considering Tandem-lift Quay Crane and transport vehicle of container's high productivity 'Alternative ship-to-yard vehicles.' Feature of this method is deriving the data of tandem-lift Quay Crane and Alternative ship-to-yard vehicles, estimating the productivity model of tandem-lift Quay Crane by using regression analysis. Tandem-lift Quay Crane is equipment of loading and unloading to increase productivity approximately by 2 time existing (single, twin) Quay Crane by dealing with four 20ft containers or two 40ft containers at the same. Alternative ship-to-yard vehicles can transfer containers(4TEU) more than existing Yard Tractor. This paper is deriving the optimal combination showing the highest productivity by using simulation considering Tandem-lift Quay Crane and Alternative ship-to-yard vehicles on container terminals and developing estimating model of productivity by using regression analysis using data of simulation.

• Korean Management Science Review
• /
• v.19 no.1
• /
• pp.13-28
• /
• 2002

This Paper discusses how to estimate the container yard space of a port container terminal as well as how much the Inventory level of containers Is affected by related factors such as allowable dwell time for containers, handling volume per containership, and loading/unloading productivity of a port container terminal. Under the assumption of static relations among the factors, a model for estimating the container yard space is suggested. In terms of arrival patterns of containers, sub-models for export, import, and transshipment containers are constructed separately. A numerical example and the sensitivity analysis for some parameters are provided to help intuitive understanding the characteristics of the suggested model. The experimental results show that the allowable dwell time for containers is the most critical one of the factors to influence on the maximum Inventory level of containers.

• International Journal of Internet, Broadcasting and Communication
• /
• v.13 no.1
• /
• pp.194-200
• /
• 2021

This study proposes a plan to construct an integrated platform that reduces manufacturing costs and efficiently produce by integrating the systems of main producers, production subcontractors, and raw material subcontractors for the production of food packaging containers. The production plan of food packaging containers and raw materials is established in real time between the main producers, production subcontractors, and raw material subcontractors in consideration of the demand characteristics of each product. It establishes basic information that all processes from the production planning stage to the forwarding stage of the product are linked to each other. The progress of each producer of interlinked processes is shared in real-time to improve productivity and quality of food packaging containers and raw materials and reduce manufacturing costs. By monitoring the system of the main producer and the production subcontractor in real time, the production of food packaging containers is performed in a timely manner, thereby improving productivity. The application of the plan-do-check-action (PDCA) process, which includes planning, execution, evaluation and improvement in the production operation processes of the main producer, production subcontractor and raw material subcontractor, enables improved production compliance rate. The contents of the main producers, production subcontractors, and raw material subcontractors are managed in real time, then a converged production management system is established through the platform proposed in this study to ensure timely supply and demand of raw materials without delay in ordering.

• Tribology and Lubricants
• /
• v.19 no.2
• /
• pp.94-101
• /
• 2003

Used motor oil contains pollutants, including organic chemicals and meta]s. When disposed of improperly - in the trash, on the ground or in a sewer system - the pollutants may reach rivers, lakes or the ground water. Thus, all the waste oil products such as waste motor oil, waste oil container, and waste oil filter should be collected and transported for recycling or disposal by waste oil regulations. Because waste oil container is a valuable resource, waste oil containers can be reused, cleaned, buried, and burned for recycling processes. This paper presents the integrated management system that may increase the efficiency and productivity for collecting and reprocessing waste oil containers such as steel can and plastic container. The integrated management system consists of collection and transportation process management system and confirmation and certification process management system for waste oil containers.

• Proceedings of the KWS Conference
• /
• 2005.11a
• /
• pp.150-151
• /
• 2005

High capacity container carrier has been considered for many decades to transport the more containers at the same time. Therefore, it is required for high capacity container ship to be applied thicker plate to accomodate a mumber of containers compared to that of general container ship. To increase productivity of welding, new welding process should be considered. A representive process for increase of weld productivity is EGW(Electrode Gas Welding) process. Both sides EGW process was evaluated for thicker-plate TMCP Steel. From the test result, it is considered that this process can be applied, showing satisfaction of mechanical properties such as tensile strength and impact property.

• Industrial Engineering and Management Systems
• /
• v.11 no.3
• /
• pp.276-287
• /
• 2012

Determining storage locations of containers is an important issue for efficient operation of container terminals. This study assumes a storage yard with a horizontal layout in which blocks are laid out in parallel to the quay and trucks enter at the side of a block to deliver (receive) a container to (from) the yard crane. Various storage rules for determining storage locations of containers are introduced. Simulation studies are conducted for evaluating various rules. The following guidelines are derived from the result of our simulation study: when designing a block, consider a block configuration in which the longest gantry and the longest trolley travel times of rail-mounted gantry cranes (RMGCs) are similar; do not restrict the types of containers that can be stored in a storage area; if different roles are to be assigned to different storage areas, one possible way is to divide a bay into two areas so that some rows in the bay are allocated to inbound containers while the other rows in the same bay are allocated to outbound containers; reserve the space in bay unit for a high productivity of RMGCs but reserve the space in stack unit when the storage space is not enough; when the storage space is not sufficient, allocate storage location in a way of starting from the end and ending at the middle of a block; for reducing the travel distance of internal trucks, provide a higher priority to a block nearer to the berthing position of the corresponding vessel.

• Journal of Distribution Science
• /
• v.16 no.12
• /
• pp.95-104
• /
• 2018

Purpose - In order to gain the upper hand in competition between container terminals, efforts to improve container terminal productivity continue. Export containers arrive randomly in the container terminal and are carried in the container terminal yard according to the arrival order. On the other hand, containers are carried out of the container terminal yard in order based on container weight, not in order of arrival. Because the carry-in order and the carry-out order are different, rehandling may occur, which reduces the performance of the container terminals. In order to reduce rehandling number, containers can be moved in advance when they arrive, which is called preprocessing. This paper proposes an effective preprocessing algorithm and analyzes the factors that affect the productivity of the container terminals. It also provides a way to choose the best factors for preprocessing for a variety of situations. Research design, data, and methodology - To analyze the impact of factors affecting the performance of preprocessing algorithms presented in this paper, simulations are performed. The simulations are performed for two types of bays, 12 stacks with 8 tiers, and 8 stacks with 6 tiers. Results - The results of the factor analysis that affects the performance of the preprocessing algorithm were as follows. (1) As the LMF increased, preprocessing number increases and rehandling number decreased. (2) The LML effect was greatest when the LML changed from 0 to 1, and that the effect decreased when it changed above 1. (3) The sum of preprocessing number and rehandling number was then shown to be increased after decrease, as the LMF increased. (4) In the case of NCI, a decrease in NCI showed that the containers would become more grouped and thus the performance was improved. (5) There was a positive effect in the case of EFS. Conclusion - In this paper, preprocessing algorithm was proposed and it was possible to choose the best factors for preprocessing for a variety of situations through simulations. Further research related to this study needs to be carried out in the following topic : a study on the improvement of container performance by connecting the preprocessing with remarshalling.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2000.11a
• /
• pp.197-205
• /
• 2000

Productivity of container cranes and gantry cranes is influenced by the performance of crane hardware and cycle time. Cycle time in container handling is influenced by the path of containers and relative positioning of containers. So we have to minimize the sway of containers and spreaders to minimize relative positioning time. And sway minimization is influenced by the skill of workers in manual gantry cranes. In this paper, we will survey some anti-sway systems. Each system has some merits and some shortages. And we will show our choice and its experimental equipment which is under construction.