• Korean Journal of Construction Engineering and Management
• /
• v.17 no.3
• /
• pp.143-155
• /
• 2016

Recently, the interest on applying AVM(Around View Monitoring) systems in construction equipments have been increasing due to the demand for better control, work efficiency and safety. Most of the existing AVM systems have been developed focusing on the application in automobiles and only several AVM systems have been developed for construction equipments. However, the original technology of AVM remained the same as in the automobiles that failed to consider the main properties of construction equipments and suggest appropriate range of AVM display (Top-view). Therefore, the purpose of this study is to suggest a pilot type of AVM system for construction equipment. Accordingly, literature review, deduction of main consideration factors, selection of sensors, system design, algorithm development of a pilot type of AVM system for construction equipment have been conducted. A laboratory experiment has also been conducted for the deduction of further improvements. As a result, a minimum image refresh rate of 20 fps has been achieved that clearly reflects the actual situation of the equipment and also, the actual motions of Boom, Arm, Bucket have been displayed appropriately on the AVM system based on the angle data collected by sensors. However, the experiment results have also shown that the following tasks still remain for future work: 1)Improvement of AVM image interpolation, 2)Development of calibration module for variety construction equipment.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.11 no.1
• /
• pp.85-95
• /
• 2016

Generally a venture capital aims at investment and support Venture businesses that signifies a start-up which has high technologies but frailty of the economy so that raise fund from financial agencies at high risk rate, it has high risk but when the venture businesses launch into general orbit, the venture capital guarantee high-rate profits. Venture capital do not just provide risk capital but also takes a role as a mentor for continuous growth with total consulting service at business and technical management. Also it offers in-depth support to reform the supported enterprise in order to enhance the competitive. Venture capital receives attention for years as a principal agent to be promoted strategically at national level. Bio venture, a major concern of venture capital and one of core industries in Korea, is different from other industries because it needs long-term and large scale of investment. these factors bring about difficulties in an investment and growth. Therefore, it is very important to identify growth and profitability of start-ups and small and venture businesses with long-term appreciation above all other industries. This research analyze management results of bio venture businesses empirically by investment from venture capital. according to the results, bio venture businesses need huge capital and a long gap of time, henceforth, formation of model for growth is necessary with angel investing as well as venture capital. Since, there are not many listed bio venture businesses, significant statistical result would be limited. This research studied at only economic focus but further study need to examine a question from various angles.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.353-358
• /
• 2003

Recently there has been huge efforts to improve performance in construction process by applying emerging techniques such as the Lean principle, Just-in-time concept and so on. However, little achievement as we expected has come out in reality due to the lack of strategy to set a definite goal of the execution and differences of personal viewpoints on construction productivity. Accordingly, it is the most important to promote the circumstances for the construction process improvement by quantifying the goals of respective unit activity groups. This research explores feasible solutions for the improvement of construction projects performance by combining the six-sigma principle for the generic administrative innovation based on the idea of construction process performance. For this purpose, mutual comparisons of various current approaches are performed in an attempt to establish the advantages in applying six-sigma idea and to provide its fundamental strategy. Furthermore, through a case study with the simulation of applying six-sigma to a unit activity group in construction process, this paper verifies that the overall performance improves as the degree of sigma level gets advanced.

• Journal of Korea Multimedia Society
• /
• v.14 no.6
• /
• pp.794-801
• /
• 2011

Main machinery in the factory have various digital indicator to display its operating data for the manager. It is useful to control these datum at the remote office for factory automation in order to increase machine productivity. It is easy to use Ethernet infrastructure for remote communication. But most of all machinery in domestic factories still support RS232c or RS485 serial communication way. In this case to control machinery datum on the ethernet base, it is need to change RS232C or RS485 data to ethernet base. In this paper, in order to develop a remote progress management system through the wireless Internet, we show a design method to make easy maintenance by developing the system with both the JAVA language and RxTx Package for RS232c serial communication. For the system implementation, we added the digital indicator connect with a thermo couple to a machine which provide the real time status data of temperature. To connect machines management server program, we set up a convertor to change the RS485 data to the RS232c and also another convertor to change the RS232c data to wireless ethernet.

• Journal of Intelligence and Information Systems
• /
• v.7 no.1
• /
• pp.81-95
• /
• 2001

Plant construction projects usually take much higher uncertainty and risks than the projects from other domains. This implies the importance of plant construction project management should be more emphasized than the other domain. Especially, the overall successes of the projects often depend on the performance of process planning and scheduling performed at the initial stage of the project. However, most plant construction projects suffer great difficulties in establishing proper process planning and scheduling timely because of unstructureness and dynamicity of environment of the project itself In this paper, we propose a knowledge-based process planning and scheduling approach in a plant construction domain to cope this problem. First, we modulize process planning knowledge and present the knowledge representation scheme. Second, we propose an inferencing mechanism to build a process planning for plant construction based on the represented process planning knowledge. Since our approach automate the initial process planning, which was usually done by manual way, it can improve the correctness and also completeness of the process plan and schedule by reducing the time to plan and allowing simulations on the various situation. We also design and implement this our approach as a real working system, and it is successfully applied to real plant construction cases from a leading construction company in Korea. Based on this success, we expect our approach can be easily applied to the projects of other areas, while contributing to enhancement in productivity and quality of project management.

• Journal of Korean Society of Forest Science
• /
• v.103 no.2
• /
• pp.264-269
• /
• 2014

The aim of this study was to determine the current distribution area of Robinia pseudoacacia habitat and to estimate its stand yield as well as its carbon stocks. In order to do so, the area of R. pseudoacacia distribution is obtained based on the large-scaled forest type map (1:5,000). Also, Weibull diameter distribution model is used to predict the yield of R. pseudoacacia stands. In addition, carbon emission factor is applied to calculate carbon stocks and removals. To obtain the stand yield of R. pseudoacacia, we developed estimation equation considering growth factors of the stand, e.g. mean diameter, the basal area, maximum and minimun diameter and etc. and tested it to ensure accuracy. Consequently, estimation equation derived from all growth factors have shown significance that could also be used for analysis. Site index was also established to determine the productivity of the forestland that later turned out to be ranging from 16 to 22. Based on these results, stand yield tables were drawn up. R. pseudoacacia is widely distributed in inland areas of Gyeongsang, Chungcheong and Gyeonggi provinces which covers total area of 26,770 ha. And when it is converted into carbon stocks, it amounts to 2,517,598tC with annual carbon uptake of 3.76tC/ha which is comparable to Querqus species that is known to storer large amounts of carbon. Therefore, R. pseudoacacia is also expected to serve as a viable carbon pool that would contribute to the mitigation of climate change. Furthermore, stand yield tables, an outcome of this survey would assist not only in proper management but also in sustainable management policy of R. pseudoacacia.

• Quality Improvement in Health Care
• /
• v.8 no.2
• /
• pp.218-231
• /
• 2001

Background : The purpose of this study was to investigate the understanding and the attitude of Korean hospital CEOs toward the healthcare quality improvement. Methods : A mailed questionnaire survey to the CEOs of hospitals with 400 beds or more was conducted between September 15 and October 30, 2000. Of the 108 hospitals eligible for the study, 58 participated, yielding a response rate of 54 percent. Result : The hospital CEOs have expressed that their hospital management was arduous job, and they had been pressured by increasing competitions among healthcare providers. They indicated that the low fees of health insurance made their hospital management difficult. The results also indicated that there was general consensus that the improvement of service quality was important in encouraging their organizations, but the investment of manpower and equipment ranked higher than the improvement of service quality. The majority of the CEOs have good understanding about quality improvement activities. However the facts that in general QI must be focused at the process of services and customer satisfaction, meanwhile quality improvement activities are helpful for the organizational productivity embarrassed them. The hospital CEOs responded that there were successful changes in terms of quality of care, patient satisfaction, and process efficiency after QI activities, but no increase in patient number and profit. Lack of understanding to QI activities and limited budget seem to attribute unsatisfactory outcomes. Conclusion : The majority of Korean hospital CEOs have a good understanding and attitude about QI activities. As mentioned in the result, despite of several limitations, several facts regarding the CEOs of hospital in Korean can be elucidated. (1) The general cognition of the QI project is relatively high, and it is accepted with positive concern, (2) the priority of the QI project, however, is not set higher than other projects and (3) the specific concepts of the actual QI project such as customer (patient)-focused work driving, the recognition of the work accomplishment, and the importance of rewards have not sufficiently understood.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.6
• /
• pp.723-730
• /
• 2016

Domestic Manila clam production has been reduced due to coastline changes and environmental degradation, but aquaculture industry is facing difficulties caused by an increase in imports. It is important to recognize the integral habitat environment in order to do sustainable aquaculture. The habitat environment of Manila clams (Ruditapes philippinarum) is closely related to the productivity of aquaculture farms. This study investigated 3 indexes, survival (sediment type, hydrodynamic), growth (Chlorophyll a, DIN, DIP) and environment (water temperature, dissolved oxygen, sediment chemical oxygen demand, ignition loss) as indicators of habitat characteristics for a tidal flat farm in Geunso Bay (Pado and Beopsan) from June 2015 to May 2016. As a result, Pado (maximums.; sand 48.76 %, hydrodynamic 10.59 cm/s, Chlorophyll a 12.70 ug/L, exposure time 3 hours, DO 18.65 mg/L) had a higher sand content, faster current speed, more abundant nutrients and DO, providing more favorable conditions for Manila clams than Beopsan (maximums.; sand 37.40 %, hydrodynamic 6.02 cm/s, Chlorophyll a 6.41 ug/L, exposure time 7 hour, DO 14.81 mg/L). In fact, Pado showed a higher density than Beopsan. This study considered the habitat environments of Pado and Beopsan to provide a basis for optimal management practices and potential suitable sites in Geunso bay.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.6
• /
• pp.597-605
• /
• 2013

This study was conducted in warty sea squirt farm, Jindong Bay(10 stations; July, October, January, April) for the culture period of Styela clava, Styela plicata. We utilized water temperature, chlorophyll a, suspended particulate matter, hydrodynamics, salinity and dissolved oxygen saturation for the suitability assessment of warty sea squirt farm. Newly, Life Requisite Suitability graphs were made for the correlation between the growth of Styela clava, Styela plicata and farm environment. As a result of the assessment for Habitat Suitability Index, western bay(HSI 0.32~0.41) show values higher than eastern bay(HSI 0.19~0.27). This result shows the high correlation with the unit production of Styela clava, Styela plicata($R^2$=0.834, P<0.01). This could be helpful for fishery management for the sustainable productivity through the scientific suitable site assessment.

• Proceedings of the Korea Contents Association Conference
• /
• 2007.11a
• /
• pp.396-400
• /
• 2007

Linking of the national R&D information between different ministries is a difficult task because they were all constructed independently. A standard infrastructure for the dissemination of such R&D information is required. This paper suggests a distributed integration method for the effective linking, gathering and integration of national R&D information. R&D management institutes designated by each ministry will gather and manage all the R&D information produced using the budget by the ministry and the information required for the integrated management of national R&D will be gathered from this information. Standardization of the R&D information, linking procedure and the construction method for the data linking software will be defined in this paper. The usage of R&D information will be processed more effectively to maximize the utiliation and productivity of national R&D activities.