• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.1
• /
• pp.153-166
• /
• 2017

Recently, the construction industry has been pursuing economical construction by introducing improved construction equipment and methods. However, in many cases, the equipment operation according to the intuition of the field manager and in the manner of traditional methods impedes the increase in effectiveness in terms of productivity and economy. The performance of new construction equipment has rapidly improved; however, the maximum effect of mechanized construction cannot be obtained unless the effective management and operation methods are implemented. According to the expert survey, it has been discovered that the problems of conventional construction equipment operation methods can be classified into several categories: allocation of construction equipment that is not suitable for the construction work, the combination of equipment that does not take into consideration real-time field situations, the decline in the skill of the construction equipment drivers, and lack of real-time access to necessary information. This paper proposes a construction equipment management system to solve these problems. The construction equipment management system can provide a method to maximize the work rate of the construction equipment fleet by developing an equipment allocation plan based on field conditions, whenever necessary, and transferring this information to the construction equipment drivers in real time. Ultimately, it is believed that the application of the construction equipment operation system in the field will make it possible to reduce carbon emissions by improving productivity and reducing fuel consumption.

• International Area Studies Review
• /
• v.15 no.3
• /
• pp.29-53
• /
• 2011

This paper studies the contribution of imports and inward foreign direct investment (FDI) as a vehicle of technology transfer onto the EU new member states at both macroeconomic and industry level. The paper takes the effectiveness of the recipient's utilization into account by constructing a new index, the so-called Effective Absorption (EA) Index, to measure ability to absorb and utilize the foreign technology in the recipient country. Using data from 12 donors and 10 recipients from 1998 to 2009, the study at macroeconomic level indicates that technical spillovers of foreign research and development (R&D) play more crucial role relatively to domestic R&D on total factor productivity (TFP) growth of the new member states. Imports are found as the major vehicle of technical spillovers rather than inward FDI. The study at industry level is conducted by using data from 17 manufacturing industries of 10 donors and 6 recipients during 1998 to 2009. The empirical results also support the findings at country level. The patterns of technology transfer are different across industries. Nonetheless, technical spillovers exhibit significantly high contribution on TFP growth in high-tech manufacturing industries.

• Journal of Korean Society of Forest Science
• /
• v.111 no.4
• /
• pp.583-593
• /
• 2022

The harvesting system in South Korea faces the problems of aging workers and high wages, so it is necessary to improve the operation system and train workers to use high-performance forestry machines. This study compared the effectiveness and costs of yarding and processing operations between a multi-operation system using a tower yarder (HAM300) and a processor (KESLA 20SH) with those of a single-system using a forestry combi-machine. A whole-tree (cable) yarding operation was conducted in the clear-cutting area located at Compartment 15, Gwangneung Experimental Forest, National Institute of Forest Science, and the productivity and cost of multi- and single-system were analyzed. The productivity of the single-system was 1.5 m³/PMH and 1.6 m³/PMH higher than that of the multi- system because the single-system produced 1 log/cycle more than the multi-system in the yarding operation. The cost was approximately 12.1% lower for the single-system (￦36,113/m³) than for the multi-system (￦41,065/m³). The costs of the single-system and multi-system were decreased by maximums of 22.6% and 15.9%, respectively, by decreasing the idle time.

• Journal of the Korea Institute of Building Construction
• /
• v.10 no.4
• /
• pp.59-65
• /
• 2010

Many Construction companies are making great efforts to prevent accidents on their work sites. Safety is one of the greatest success factors on a construction project. Nowadays, many safety tools are being applied to construction sites. In addition, an emotional safety culture is an important factor for promoting a "safety first" mindset on construction sites. Therefore, this research aims to examine the effectiveness of the emotional safety system using PIR (Pyroelectric Infrared Ray) sensors to improve the safety mindset in the building construction site. The results of this research revealed that many construction site workers are satisfied with the emotional safety system using sensors. In addition, it was found that voice safety systems give a positive impulse to the workers. By applying this system to construction sites, construction companies can improve safety and work productivity.

• Journal of Sericultural and Entomological Science
• /
• v.23 no.1
• /
• pp.32-37
• /
• 1981

It is necessary to improve new silkworm variety suitable for the artificial diet different from the mulberry leaves in physical and chemical natures. The silkworms fed on artificial diet show low productivity in general. So the effectiveness of selection for cocoon characters was studied when the silkworms were reared on the artificial diet for several generations. The results obtained are as fellows: 1. There is no correlation between the cocoon shell weight and the cocoon shell percentage in female cocoons of both Sa and Y strains but in male cocoons. 2. No correlation exists between the weight of a cocoon and a cocoon shell percentage of male cocoons in Sa strain. 3. There is a specific effect of the artificial diet on selection between Japanese and Chinese strains compared with the mulberry leave rearing. 4. The cocoon quality of first generation in artificial diet rearing was very inferier to that of previous generation in mulberry leave rearing in both Sa and Y strains, but the effect of selection rapidly increased in first and second generation.5. Very high mortality was noted in 4th generation to the degree of hardness for successive generation. 6. From 6th generation to 10th generation, the effectiveness of selection for cocoon characters increased continuously except the cocoon shell percteage.

• Journal of the Ergonomics Society of Korea
• /
• v.33 no.5
• /
• pp.313-321
• /
• 2014

Objective: The purpose of this study is to develop products that prevent muscular skeletal disease of farm workers, which would bring improvement for an efficient harvesting work. Background: A pretest for product development and a survey research was carried out to inspect the problems of current harvesting work procedure. The product was developed and assessed based on ideas to supplement and improve these weak points. Method: A total of twenty men were recruited to evaluate the effects of harvest baskets on the upper-limb muscle activity, working hours. For the usability evaluation, electromyogram and working hours of previous working method (disuse of harvest basket, one-hand carriage of the basket) and new working method with the usage of newly-developed harvest basket was examined. The whole anterior deltoid, biceps brachii and erector spinae on both sides, which make a total of six muscle parts, were used for this experiment. The results were analyzed using ANOVA with muscle activity (%MVC) of each three forms of work and required work time from SPSS 18.0. Results: According to the test result, all muscles did not demonstrate any statistically significant difference, with an exception of the backbone erector (right). The muscle activity of backbone erector (right) in the work method that uses the harvest basket developed in this study was detected to be approximately 23% less than that of the previous working method. Moreover, compared to the previous working method, the required work time decreased to a statistically significant degree. Conclusion: As such, the decrease in the amount of waist muscle usage at harvesting work would enable the prevention of muscular skeletal disease and stabilization of lumbar spine. Application: Which in turn would increase the effectiveness and reduce personnel expense (labor costs) while enhancing productivity with a decreased working hours.

• Journal of Digital Convergence
• /
• v.3 no.2
• /
• pp.73-116
• /
• 2005

When people contact the government they can use a variety of channels. That is, they go in person to an office, use a telephone service, access information via the Internet, send a letter, or use a third party. Since the Australian Government first recognised the potential of online technology to improve service delivery in its 1997 Investing for Growth statement, it has articulated its policies and strategies for e-government in a number of papers. E-government involves government agencies delivering better programs and services online through the use of new information and communication technologies. The policy papers included Government Online-The Commonwealth's Strategy, launched in April 2000, and a new framework for e-government, Better Services. Better Government, launched in November 2002. Most recently, the Government released Australia's Strategic Framework for the Information Economy in July 2004. These papers outlined the broad directions and priorities for the future of e-government in Australia, and sought to maintain the momentum of agencies' actions under Government Online. One of its key objectives was for agencies to achieve greater efficiency in providing services and a return on their investments in ICT (Information and Communication Technology)-based service delivery. They also stated that investing in e-government should deliver tangible returns, whether they take the form of cost reductions, increased efficiency and productivity, or improved services to business and the broader community Implementation of the Government policy has led to considerable agency investment in ICT-based service delivery. However government policy also requires managers to ensure that program and service delivery is efficient and effective. Efficient and effective use of ICT has the potential to improve service delivery and to make financial savings. This paper outlines how people are using the channels to contact the government in Australia. It also examines the level of satisfaction they have with those services and their preferences and expectations. In addition, this paper aims at identifying the methods used by Australian Government to measure the efficiency and effectiveness of their delivery of services, and at assessing the adequacy of these methods.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.790-793
• /
• 2008

Recently, Intelligent Excavating System(IES) for earthwork automation is on progress since the end of 2006 as a part of construction technology innovation projects in Ministry of Land, Transport and Maritime Affairs. Task Planning System(TPS), one of the detail core technologies of IES, is an optimal work planning system in conditions of effectiveness, safety and economic efficiency by analyzing the work environment data based on earthwork design and work environment recognition technology. For effective earthwork planning, the location of platform must be the most optimal spot for minimization of time, maximization of productivity and reduction of overlapped work spaces and unnecessariness. Besides, the decision of optimal platform location is to be based on the specifications and then is able to be converted with the local area calculation algorithm. This study explains the decision of optimal platform location on the basis of local area from the work space separate process and judges the effectiveness.

• Journal of Korean Academy of Nursing
• /
• v.38 no.3
• /
• pp.363-371
• /
• 2008

Purpose: This analysis was conducted to evaluate the cost-effectiveness of gemcitabine-cisplatin chemotherapy for non small-cell lung cancer patients in an outpatient setting compared with the traditional inpatient setting. Methods: A cost-effective analysis was conducted from a societal perspective. The effects of treatment, which was measured as an adverse event rate, were abstracted from a published literature search and empirical data from one university hospital. The costs included both direct and indirect costs. Direct costs included hospitalizations, outpatient visits, and lab tests. Pharmaceutical costs were excluded in analysis because they were same for both options. Indirect costs included productivity loss of patients as well as care-givers. In order to determine the robustness of the results, sensitivity analysis on treatment protocol was conducted. Results: Literature search showed no difference in adverse effect rates between inpatient treatment protocol and outpatient treatment protocol. Therefore, this analysis is a cost-minimization analysis. Cost-savings in the outpatient setting was 555,936 won for one treatment cycle. Our sensitivity analysis indicated that the outpatient chemotherapy still showed cost-savings, regardless of changes in treatment protocol. Conclusion: The outpatient gemcitabine-cisplatin chemotherapy for non small-cell lung cancer resulted in cost savings compared to inpatient chemotherapy. More importantly, outpatient chemotherapy could improve the utilization of health service resources in terms of available beds.

• Journal of Fisheries and Marine Sciences Education
• /
• v.11 no.1
• /
• pp.59-68
• /
• 1999

The effectiveness of fishery resources enhancement of artificial reef settled in the coast of Cheju Island was determined by using the samples collected by scuaba and caught by the trammel net. The obtained results are summarized as follows; 1. Six types of shellfish were found in the artificial reef area, and the amount of shellfish living in that area was $490{\sim}3,483g/m^2$ according to our research. This shows a high density of shellfish in that area. 2. Ten types of seaweeds were found in the artificial reef area, and the reef living in that area was abundant, with $3,556{\sim}10,550g/m^2$. 3. The amount of a catch of fish in the artificial reef area was 3.5~21.4 times more than in the control area. This result shows the high productivity in that area.