• Journal of the Korean Home Economics Association
• /
• v.41 no.8
• /
• pp.213-227
• /
• 2003

The purpose of this study is to explore a weekly life of Korean high school students, especially focused on their activities, locations, and flow. The data were collected from 116 high school students by the Experiential Sampling Method, employing a cellular-phone as a signaling device. Students reported, in response to the 6964 random signals, that 43.4% of their time was spent for social/leisure activities. An additional 31% percent of time was used for productive activities and the rest of times belonged to maintenance activities. When engaged in productive activities, they usually reported anxiety, while they felt bored for social/leisure activities and flow for maintenance activities. The most pervasive context of their lives was school (42.8％), followed by home (33.3%), public space (24.6%), and educational institutes (9.2%). In general, they experienced flow for the most of the locations, except educational settings in which they felt anxiety. The flow for productive activities varied by gender, pending on where they had productive activities, while others did not show any significant differences in the activity flow by locations.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.10 no.2
• /
• pp.95-99
• /
• 2005

A breeding plan was carried out on four commercial strains of silkworm (Bombyx mori L.) 101, 102, 103 and 104 to improve some important traits. Genetic gain or response to selection $({\Delta}G)$, heritability of cocoon shell weight (CSW) and specific combining ability effects were estimated to determine the strains that can be improved. Strain 101 had lowest heritabitity, ${\Delta}G$ and viability. Strain 102 was acceptable in selection response but its viability was low. Therefore these two strains were not suitable for more selection. As a result, only lines 103 and 104 were chosen for further improvement. Intra population selection based on independent culling level method practiced from third to sixth generation for both productive and viability traits simultaneously. While CSW and CW had increasingly enhanced during primary generations, they went slightly up after third generation. According to negative genetic correlation, viability decreased during primary generations, but after third generation that paid attention to balanced development of both productive and viability traits, viability increased so that the pupation rate reached to $91\%$ in 103 and $97\%$ in 104 for last generation $(G_8)$.

• Korean Journal of Poultry Science
• /
• v.50 no.4
• /
• pp.213-229
• /
• 2023

This study aimed to investigate the effects of beak trimming and crossbreeding-combinations on the productive performance and stress response levels of Korean native chickens. The study divided 248 individuals from six crossbreeding-combinations into two groups: one underwent beak trimming, and the other did not. The survival rate, body weight, egg production rate, egg quality, feather damage score, HSP-70 gene expression level, H/L ratio, and intracellular DNA damage rate were measured and analyzed. The results showed that the beak-trimmed group had significantly higher survival rates and hen-housed egg production compared to the non-beak-trimmed group (P<0.05). Feather damage and DNA damage rates were significantly lower in the beak-trimmed group (P<0.05). On the other hand, there were no significant differences between the two groups in adult body weight, hen-day egg production, egg quality, HSP-70 gene expression level, and H/L ratio. Among the crossbreeding-combinations, there were significant differences in survival rate, body weight, feather damage score, egg quality, and DNA damage rate (P<0.05), while egg production rate, HSP-70 gene expression level, and H/L ratio showed no significant differences. There was an interaction between beak trimming and crossbreeding-combinations in some traits. In conclusion, beak trimming in Korean native chickens has a positive impact on productive performance, and in terms of stress response, beak trimming may not act as a stress factor or may even reduce stress after the growing period. Furthermore, there were differences in productive performance and stress response levels among crossbreeding-combinations, but the effects of beak trimming were similar across these combinations.

• International Journal of Quality Innovation
• /
• v.2 no.1
• /
• pp.106-116
• /
• 2001

The purpose of business strategy is to achieve competitive advantages which includes higher efficiency, better quality, more innovation and faster customer response. In other words, The business strategy is to build unique capability of lower cost and/or differentiation. In production aspect, unique capability means better production power with better performance at 3M(Man, Machine, Material) of input and PQCDSM (Product, Quality, Cost, Delivery, Safety, Moral) from output. The Total Productive management (TPM), a series of improvement activities focused on reduction of equipment loss, is a tool to establish business competitive advantages. In this paper, several domestic companies who won the Japan TPM Award have been studied. It is found that there is a strong cause-effect relationship between TPM and competitive advantages because. 1. TPM can change employees mindset effectively. 2. TPM can upgrade employees capabilities. 3. TPM can lead to excellent productivity.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.12 no.2
• /
• pp.95-100
• /
• 2006

Central Sericultural Research and Training Institute, Mysore have evolved several highly productive bivoltine hybrids which can produce international grade raw silk. Among them $CSR2{\times}CSR4,\;CSR2{\times}CSR5,\;CSR3{\times}CSR6,\;CSR17{\times}CSR16,\;CSR18{\times}CSR19$ and $CSR12{\times}CSR6$ are being popularized in the field. There is a minimum difference in their economic characters but they appear to differ in survival. Though they are productive under high input management conditions, they are very susceptible to different diseases under normal rearing practices. No systematic attempts have been made to test their susceptibility status / resistance. Thus the present study is a modest attempt to screen the above six productive bivoltine hybrids to two important pathogens viz., Bombyx mori Nuclear Polyhedrosis Virus (BmNPV) and Bombyx mori Infectious Flacherie Virus (BmIFV) along with existing hybrid, $KA{\times}NB4D2$ to assess their susceptibility / resistance. The results shows that the productive hybrid $CSR2{\times}CSR4$ is the most resistant to BmNPV and it is suggested by its highest $LC_{50}$ value followed by $CSR12{\times}CSR6,\;KA{\times}NB4D2,\;CSR3{\times}CSR6,\;CSR17{\times}CSR16,\;CSR18{\times}CSR19,\;CSR2{\times}CSR5$. Based on the $LC_{50}$ value and $LT_{50}$ values for BmIFV, the hybrid $KA{\times}NB4D2$ was found to be the most resistant (1st position) one followed by $CSR3{\times}CSR6$ (2nd position) $CSR2{\times}CSR$ (3rd position) and $CSR12{\times}CSR6$ (4th position) $CSR17{\times}CSR16$, $CSR18{\times}CSR19$ (5th position) and $CSR2{\times}CSR5$ being the least. The response of 7 bivoltine hybrids to both the pathogens BmNPV and BmIFV indicates that, the hybrids $CSR2{\times}CSR4$, $CSR12{\times}CSR6$ and $KA{\times}NB4D2$ were found to be the most resistant when compared to others. Further, $KA{\times}NB4D2$ being less productive hybrid with a shell ratio of 20.08%, the other two hybrids $CSR2{\times}CSR4$ (Cocoon shell ratio, 21.44%) and $CSR12{\times}CSR6$ (cocoon shell ratio, 23.45%) can be considered to be most productive with superior quality cocoon and resistant to both BmNPV and BmIFV pathogens. The overall study indicated that the hybrid $CSR2{\times}CSR5$ is the most susceptible hybrid to both the pathogens.

• Animal Bioscience
• /
• v.37 no.4
• /
• pp.668-677
• /
• 2024

Objective: The current experiment was performed to investigate the influence of different dietary levels of Moringa oleifera leaf meal (MOLM) on productive performance, nutrient digestibility, blood parameters, immune response, caecal microbiota, and carcass characteristics of Muscovy ducks (Cairina moschata) during 7 to 63 d of age. Methods: A total of 240 unsexed 7-d-old ducklings were distributed into five (treatment) groups; each one contained six replicates with eight ducklings each. Birds of the first group were fed basal diet without MOLM and served as control, while the other four groups were fed basal diet with 0.25%, 0.50%, 1.0%, and 2.0% MOLM inclusion level, respectively. Results: The obtained results revealed that including MOLM in the diets significantly improved body weight, body weight gain, feed conversion ratio and economic efficiency compared with the control group. Among the different MOLM inclusion treatments, increasing MOLM inclusion level decreased (p<0.05) such previous parameters. Decreasing MOLM inclusion levels in duckling diets increased (p>0.05) the digestibility of organic matter, crude protein, ether extract, and nitrogen free extract, however all MOLM treatments were significantly higher than the control group. Results also revealed that feeding ducks lower MOLM inclusion levels (0.25% or 0.50%) improved blood parameters (p<0.05) compared with the higher inclusion levels (1.0% or 2.0% MOLM) and the control group. Ducks fed different MOLM levels had significantly higher phagocyte index and activity, immunoglobulin G (IgG), IgM, total antioxidant capacity, glutathione peroxidase activity, and superoxide dismutase activity compared with control group. Conclusion: Despite the beneficial effects of all MOLM treatments on growth performance, nutrient digestibility, physiological status, and immune response of duckling, the increasing MOLM inclusion level in the diet had deleterious effects on such studied traits, consequently 0.25% was the best MOLM inclusion level in duckling diets.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.21 no.45
• /
• pp.247-251
• /
• 1998

From the early 90's TPM(Total Productive Maintenance) plays important roles to improve productivity and quality to keep enterprise's competivity. This study presents the results of an enquiry for the maintenance management of Korean industry in 1996. The response rate was 35.8% (43 companies) that the corporations were divided into four industrial groups, heavy process, light process, heavy assembly and light assembly. 40 question were asked, including maintenance organization, maintenance personnel, maintenance cost, measurement of maintenance performance and improvements achieved. This paper compares the results with those of an earlier Japanese and British enquiry.

• International Journal of Reliability and Applications
• /
• v.1 no.1
• /
• pp.1-14
• /
• 2000

The global marketplace is highly competitive and organisations, who want to survive long-term, have to continuously improve, change and adapt in response to market demands. These improvements should focus on cost cutting, increasing productivity levels and quality and guaranteeing deliveries in order to satisfy customers. Total Productive Maintenance (TPM) is one method, which can be used to achieve these goals. TPM is a change management approach that involves employees from both production and maintenance departments. The purpose is to eliminate major production losses by introducing a program of continuous and systematic improvements to production equipment. TPM should be developed and expanded to embrace the whole organisation and all employees should be involved in the process as members of improvement teams. This paper gives a short description of the development of TPM and the TPM implementation process. Findings are reported from a case study in which one of the authors had the possibility of following and guiding a company through their TPM implementation. The implementation process takes several years and the research has focused on the initial three years. The study demonstrates that driving forces, obstacles and difficulties often are dependent on the organisation, its managers and the individual employees.

• Communications for Statistical Applications and Methods
• /
• v.16 no.1
• /
• pp.103-113
• /
• 2009

Weighting is a common form of unit nonresponse adjustment in sample surveys where entire questionnaires are missing due to noncontact or refusal to participate. A common approach computes the response weight as the inverse of the response rate within adjustment cells based on covariate information. In this paper, we consider the efficiency and robustness of nonresponse weight adjustment bated on the response propensity and predictive mean. In the simulation study based on 2000 Fishry Census in Korea, the root mean squared errors for assessing the various ways of forming nonresponse adjustment cell s are investigated. The simulation result suggest that the most important feature of variables for inclusion in weighting adjustment is that they are predictive of survey outcomes. Though useful, prediction of the propensity to response is a secondary. Also the result suggest that adjustment cells based on joint classification by the response propensity and predictor of the outcomes is productive.

• Journal of the Korean Regional Science Association
• /
• v.32 no.4
• /
• pp.19-38
• /
• 2016

This study investigates the effects of real exchange rate (RER) on firm level mark-up and export. Using firm level data in Daegu-Gyeongbuk manufacturing industries during 2006-2013, we find that firms adjust their markup in response to the RER changes and this adjustment is heterogeneous with respect to firm and industry characteristics. In particular, an increase in markup following the RER depreciation is greater for firms with lower intermediate input import and higher industry concentration. However, productive firms in this region increase their export, instead of markup, during the RER depreciation. This implies that the productive firms in the region may not retain significant market power: They do not change the final price in local currency to increase selling volume during the RER depreciation (the export price in foreign currency decreases).