• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.705-708
• /
• 2009

For the Gas hydrate Research and Development in Korea, the prospect area I & II was surveyed and drilled during the first phase. At the result, we succeeded to discovering gas hydrate real sample at BSR reflection and vent structure. This expedition processing contributes to developing the offshore seismic survey technologies and data processing of Korea. But Korean gas hydrate test production research, in spite of activating test production at other countries, is such a limitation about technician, GH production technologies and E&P processing. First of all, there is no exist in Korea to application site for the their production research results. In this paper, we have studied the gas hydrate reservoir selection technics of the DOE & BPXA for the ANS test production. And this result will helpful to preparation of gas hydrate test production in Korea.

• 에너지공학
• /
• 제23권3호
• /
• pp.102-115
• /
• 2014

국내 동해 울릉분지에는 막대한 부존량과 청정 에너지원으로 높은 잠재력을 지닌 가스하이드레이트가 부존되어 있으며, 2010년 울릉분지 2차 시추지역(UBGH2)에서 현장 생산 시험 후보지 선정을 위한 목적으로 시추작업이 수행되었다. 이 연구에서는 동해 울릉분지 현장 생산 시험 후보지역의 지질학적 모델을 바탕으로 전산 수치 해석을 이용하여 가스하이드레이트 퇴적층 내 해리 유동 및 산출성을 분석하였으며, 주요 생산 조건별 감압 생산 거동에 대한 민감도 분석을 수행하였다. 이를 통해 가스하이드레이트 현장 생산 시험 계획 수립 시 요구되는 예비 분석 자료를 도출하였다.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2008년도 추계학술발표대회 논문집
• /
• pp.300-305
• /
• 2008

Using WindPRO that was software for windfarm design developed by EMD from Denmark, wind resources for the western Jeju island were analyzed, and the performance of WindPRO prediction was evaluated in detail. The Hansu site and the Yongdang site that were located in coastal region were selected, and wind data for one year at the two sites were analyzed using WindPRO. As a result, the relative error of the Prediction for annual energy Production and capacity factor was about ${\pm}20%$. For evaluating wind energy more accurately, it is necessary to obtain lots of wind data and real electric power production data from real windfarm.

• 한국태양에너지학회 논문집
• /
• 제28권3호
• /
• pp.45-52
• /
• 2008

In order to clarify characteristics of variation in wind energy over a long-term period, an investigation was carried out at Seoguang site on Jeju island. The wind data for 10 years from Automatic Weather System (AWS) were analyzed for each year. The variation in the annual energy production (AEP) for the 2 MW wind turbine was estimated through statistical work. The result shows that the range of the yearly average wind speed at 15 m above ground level for 10 years was from -22.6% to +13.7%, which is wider range than that in Japan. The coefficient of variation for the AEP was 22.7%, which is about twice of that for the yearly average wind speed. Therefore, for estimating the wind energy potential accurately at a given site, the wind data should be analyzed over a long-term period based on the data from the meteorological station.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1996년도 봄 학술발표회 논문집
• /
• pp.370-375
• /
• 1996

This paper presents a series of tests to produce the high quality concrete to be filled inside the steel tube columns. This concrete filled steel tube system requires not only the high strength, but also the high flowable concrete. Laboratory test has been performed to clarify the material characteristics and to produce the optimal mix design proportion. Full-scale site mock-up test has been then carried out to simulate the actual construction conditions including the production of concrete at the remicon batch plant, transportation to the construction site, proper workability and man-power required.

• 대한토목학회논문집
• /
• 제34권3호
• /
• pp.965-975
• /
• 2014

프리텐션 공법으로 생산되는 부재는 제작대의 대형화에 따른 문제로 일반적으로 공장에서 제작되고, 이에 따라 운반상의 문제로 프리텐션 부재의 크기에 제한을 받게된다. 본 연구에서는 현장에서 프리텐션 공법을 적용할 수 있는 이동식 프리텐션 제작시스템을 개발하였다. 프리텐션 방식의 50m급 PSC 거더를 제작하기 위해서는 높은 압축력에 대해 시스템이 지속적으로 저항해야 한다. 따라서 이동식 제작시스템은 긴장력에 대해 좌굴안정성을 확보해야 한다. 본 연구에서는 50m 길이의 프리텐션 거더를 제작할 수 있는 이동식 제작시스템을 CFT부재를 이용하여 제작하였다. 시스템의 안전성과 구성부재의 거동을 파악하기 위해 정적가력시험을 수행하여 이동식 프리텐션 제작시스템의 안정성을 입증하였다. 이동식 프리텐션 제작시스템은 다양한 프리텐션 부재 제작현장에 투입되어 시공성이 검토되었다. 공장이 아닌 현장에서 이동식 프리텐션 제작시스템을 통해서 생산되는 프리텐션 부재는 포스트텐션 공법에 비해 공정이 단순하고, 프리스트레스 손실이 적으며, 정착장치 등이 불필요하다는 장점을 현장에서 효율적으로 활용할 수 있게 되었다.

• 한국태양에너지학회 논문집
• /
• 제33권6호
• /
• pp.32-38
• /
• 2013

In an efforts to encourage renewable energy deployment, the government has initiated so called 1 million green homes program but the accumulated installation capacity of small wind turbine has been about 70kW. It can be explained in several ways such that current subsidy program does not meet public expectations, economic feasibility of wind energy is in doubt or acoustic emission is significant etc. The author investigated annual energy production of Skystream 3.7 wind turbine using measured power curve and wind resource data. The measured power curve of the small wind turbine was obtained through power performance tests at Wol-Ryoung test site. AEP(Annual Energy Production) and CF(Capacity Factor) were evaluated at selected locations with the measured power curve.

• 기술사
• /
• 제30권6호
• /
• pp.113-120
• /
• 1997

This subject,'S" apartment structural frame has not been achieved without considerable effort by all quality controller involved. Therefore, it is appropriate at this time to report by all the fact of concrete quality control in our site. These are emphasized that the average strength of placed concrete must always exceed the specified value of design strength used in the structural design phase. In general, quality of ready mixed concrete largely depends not only upon the manner of production and proper observance of recognized methods of placement, finishing, curing, transportation etc. ,but also many kinds of influential factors even more handling of the test procedure, As this practical report, approaching to judgement by analysis of sampled specimens in site weather placed concrete have satisfied quality compare the specified strength with the target strength which is applied to standard deviation related with influential factors as above mentioned. This case study is consist of 1) A foreword, 2) Site brief, 3) A precondition for analysis, 4) A formulas derivation and quality analysis, 5) Economic gains by the coefRcient of increase and 6) A conclusion.sion.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 추계학술대회 논문집
• /
• pp.372-375
• /
• 2007

750kW gearless type wind turbine, named U50, is developed by UNISON in Korea. The newly developed wind turbine should be evaluated the power curve and the estimated annual energy production by following international standard to verify the power performance characteristics. This paper shows the test and evaluation procedure according to IEC 61400-12-1 which specifies a procedure of measuring the power performance characteristics of a single wind turbine and applies to the testing of wind turbines of all types and sized connected to the electrical power network. And this paper also shows the power performance characteristics for U50 wind turbine which is determined in accordance with IEC regulation.

• Journal of Mechanical Science and Technology
• /
• 제20권12호
• /
• pp.2013-2024
• /
• 2006

This paper proposes a condition classification system using wavelet transform, feature evaluation and artificial neural networks to detect faulty products on the production line of reciprocating compressors for refrigerators. The stationary features of vibration signals are extracted from statistical cumulants of the discrete wavelet coefficients and root mean square values of band-pass frequencies. The neural networks are trained by the sample data, including healthy or faulty compressors. Based on training, the proposed system can be used on the automatic mass production line to classify product quality instead of people inspection. The validity of this system is demonstrated by the on-site test at LG Electronics, Inc. for reciprocating compressors. According to different products, this system after some modification may be useful to increase productivity in different types of production lines.