• 대한영양사협회학술지
• /
• 제18권2호
• /
• pp.170-185
• /
• 2012

The purpose of this study was to explore nutrition teachers/dietitians' perception towards production management practices as well as the importance & performance of nutrient preservation during production by school foodservices. A total of 120 school nutrition teachers/dietitians in the Daegu area participated in this study. The data were analyzed by descriptive analysis, t-test, and ANOVA using SPSS/Windows (ver 17.0). A questionnaire consisted of three dimensions with 66 items concerning the general characteristics of schools and respondents, production management practices, and perceived importance and performance of nutrient preservation. Exactly 79.2% of dietitians responded that scheduling of production management is necessary, and 52.5% of respondents perceived that their knowledge for nutrient preservation is of normal/average level. Thirty-eight percent of respondents did not establish scheduling of production management; according to them, cooking stage has priority over other stages of nutrient preservation. Perceived importance score was higher than perceived performance score in all stages of production management. The difference between perceived importance and performance in the production scheduling stage was found to be statistically significant. The results indicate that nutrition control point should be established and managed to prevent nutrient loss in all production stages. Further, dietitians who do not take measures to reduce nutrient loss should be carefully educated on the importance of nutrient control and be motivated to follow guidelines on nutrient preservation.

• 한국방재학회 논문집
• /
• 제7권5호
• /
• pp.159-166
• /
• 2007

Large scale flood disasters bring human losses and properties, which lead to the decrease of our productive value and change social environment. Human loss and economic damage are considered to be the same system but they are viewed as separated systems. The total amount of human loss can be represented as the total amount of economic damage estimated in the frame of social system while it will be possible to make mutual changing by clearing the relations between social and economic systems. In this regard, an attempt to estimate economic loss considering per capita Gross Domestic Production (GDP) caused by flood-related mortality was carried out to the typhoon Rusa of 2002 in Kangwon-do. The proposed method tried to capture quantitative factors which are affecting the loss of per capita GDP. The approach has great importance not only to set up governmental policy but also methodological progress in the research due to impact of disaster-related mortality on GDP loss.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 The Korea-Japan Joint Symposium
• /
• pp.53-54
• /
• 2003

Fukusuke applied for beginning "Civil affairs reproduction procedure" on June 21, 2003. It′s bankrupt. After obtaining the data of "Commodity Attribute, Sales, Sates Cost, Stock, Ordinary Profit, And Special Loss" based on the financial statement at the time of the bankruptcy, the influence of the production method improves checking. They are compared with a similar apparel company. The production method is close with the distribution circumstances. As a result, it searches for the limit of "Mass-Sail system" in fiber ＆ fashion product by "Make To Stock(MTS) Production Method".

• Kyungpook Mathematical Journal
• /
• 제19권1호
• /
• pp.135-139
• /
• 1979

We consider the problem that how must the production of certain item vary as a function of time, if for known losses due to depreciation the total amount of the product is to have a constant value. The integral equation associated with the problem is solved by an appeal to the convolution quotients. The production function comes out to be an expression containing the generalized Laguerre polynomials. The loss function and the production function are tabulated for different values of the parameter by using an IBM 370/145 computer.

• 한국전기전자재료학회논문지
• /
• 제23권12호
• /
• pp.978-982
• /
• 2010

For mass information transfer, the optical communication using optic fiber has been widely used. Especially, in the field of medical image, the large data is digitalized based on the standard image and it is used for telemedicine with this method. Therefore, to transfer the large amount of data fast and effectively POF (Plastic Optical Fiber) can be used and the development of optic connector for connection between POFs is very important. In this study, for stable optical coupling of POF optic fiber Ferrule and Sleeve were designed and produced by considering the bond stability and the insertion loss according to the physical contact and roughness profile was evaluated. As a result of examining the insertion loss by physical contact method of two optic fibers, it showed the loss was about 1.895dB. According to the results from studying the condition of grinding section for POF mass production, the mass production condition was established as POF profile roughness of 6nm and the loss of 0.2dB or lower by controlling the film size and time step by step.

• 융합보안논문지
• /
• 제15권3_2호
• /
• pp.71-76
• /
• 2015

글로벌 기업들은 글로벌 생산 네트워크를 구축하여 세계 시장의 수요에 대응하고 있다. 그러나 해외 공장 설립 및 운영 시 현지 노동자들의 임금문제, 낮은 생산의욕 및 도난사고로 인한 피해가 속출하고 있다. 따라서 본 논문에서는 글로벌 기업의 해외 공장에서 원자재를 IP Camera와 RFID Box를 이용하여 관리함으로써, 실시간적인 재고 파악과 원자재의 도난 또는 멸실되는 상황을 방지할 수 있는 원자재 유실 방지 모델을 제안하였다. 이 모델은 원격지에 있는 재고의 관리가 가능하여 보다 비용 효율적인 생산관리를 실현할 수 있게 해주며, 불합격품 거래로 인한 브랜드 이미지 손실과 수익 저하를 방지할 수 있도록 해준다.

• Current Photovoltaic Research
• /
• 제6권1호
• /
• pp.1-11
• /
• 2018

Current major photovoltaic (PV) market share (> 60%) is being occupied by the multicrystalline (mc)-silicon solar cells despite of low efficiency compared to single crystalline silicon solar cells. The diamond wire sawing technology reduces the production cost of crystalline silicon solar cells, it increases the optical loss for the existing mc-silicon solar cells and hence its efficiency is low in the current mass production line. To overcome the optical loss in the mc-crystalline silicon, caused by the diamond wire sawing, next generation texturing process is being investigated by various research groups for the PV industry. In this review, the limitation of surface structure and optical loss due to the reflectivity of conventional mc-silicon solar cells are explained by the typical texturing mechanism. Various texturing technologies that could minimize the optical loss of mc-silicon solar cells are explained. Finally, next generation texturing technology to survive in the fierce cost competition of photovoltaic market is discussed.

• 한국유기농업학회지
• /
• 제32권1호
• /
• pp.25-37
• /
• 2024

This study is to apply behavioral economics-an economics that studies actual human behavior based on cognitive psychology-to the farming decision-making process of onion and garlic farmers. Of behavioral economic theories, dual system theory and prospect theory (value function), heuristic and bias were surveyed and examined in the field. The reference point of farmers was farming experience of the previous year, and so they showed reference dependence and anchoring heuristic, not rational thinking on production cost plan. And they showed status quo bias that cultivated continuously the previous year or the present crop. This status quo bias is related to loss aversion propensity. Farmers did not usually change cultivating crops, in other words, they showed diminishing sensitivity-insensitive to those that the more revenue or loss was increased. This diminishing sensitivity is related to loss aversion propensity and status quo bias. Also, farmers had representativeness heuristic because they regarded auction price of Garakdong wholesale market as the standard price level despite various prices by production region. And farmers had the affect heuristic that they depended on producers' organization data more than the state-run research institute ones about cultivation intentions and actual situations.

• 전기의세계
• /
• 제14권4호
• /
• pp.8-17
• /
• 1965

Firstly, this study has analyzed the following factors affecting the optimum specifications and design of distributive transformers: 1. Facilities installation cost per unit power output. 2. Facilities operating & maintenance cost per unit power output. 3. Production cost per unit power output. 4. Load factor. 5. Loss factor. Secondly, it has clarified the relations between the following factors and the specifications and design of distributive transformers; 1. No-load loss., 2. Load loss., 3. Voltage regulation., 4. Exciting current. Finally, it has determined the method of the most economic design for the transformers using the above factors and relations, and, for optimum the illustrative purpose, suggested their optimum specifications, way of evaluation, and merits by means of typical example.

• 대한핵의학회지
• /
• 제4권2호
• /
• pp.55-66
• /
• 1970

Reappraisal measurements of apparent half survival time of red cell by $^{51}Cr$ method was made and effects of blood-letting over red cell survival were observed. The study was performed on 53 normal male subjects under three different experimental conditions. 1. Group 1 Mean $^{51}Cr$ red cell half survival by ACD wash method was 29.7 days. $T\frac{1}{2}$ of Ascorbic acid method was 29.0 days in group with 100 mg dose and 29.1 days in group with 50 mg dose respectively. There was no difference between these two methods in regards to red cell half survival. No difference were noted in amount of ascorbic acid administered. 2. Group 2 As daily amount of blood loss is increased the shortening of red cell half survival was noted. Rapid phase was seen when blood loss ranged 10 to 25 ml per day, while slow phase noted when more loss amounted 25 ml or more daily. Thus, it was clear that there was more than an exponential relation between $T\frac{1}{2}$ and the amount of blood loss. 3. Group 3 $T\frac{1}{2}$ measured by cpm per whole blood was within normal range and $T\frac{1}{2}$ measured by cpm per red cell mass showed shortening tendency when compared with the former in the group measured after blood loss (from 25 ml daily up to 100 ml daily in 10 days). In the group with rather constant blood loss of 100 ml daily for 10 consecutive days revealed the significant difference in two measurements (P<0.01). 4. $T\frac{1}{2}$ in non-steady state When red cell production is increased compared with red cell destruction, $T\frac{1}{2}$ measured by cpm per red cell mass being shorter than that by cpm per whole blood. Shortening of $T\frac{1}{2}$ measured by cpm per whole blood is more prominent. if red cell destrction is enhanced and exceeds production. 5. It is clear that when expressing red cell destruction rate, $T\frac{1}{2}$ measured by cpm per whole blood is more adequate and production more consistent with cpm red cell mass. 6. $T\frac{1}{2}$ measured during blood-letting, when corrected by amount of blood loss, it remains normal. It is erroneous to use conventional equational when measuring $T\frac{1}{2}$ in non-steady. $T\frac{1}{2}$ measured by cpm per whole blood is considred more applicable in clinical evaluation.