• Journal of Animal Science and Technology
• /
• 제60권2호
• /
• pp.3.1-3.9
• /
• 2018

Background: Poultry breeding has increased by 306% in Korea, inevitably increasing the production of manure which may contribute to environmental pollution. The nutrients (NP) in the manure are essential for crop cultivation and soil fertility when applied as compost. Excess nutrients from manure can be accumulated on the land and can lead to eutrophication. Therefore, a nutrient load on the finite land should be calculated. Methods: This study calculates the nutrient production from Korean poultry by investigating 11 broiler and 16 laying hen farms. The broiler manure was composted using deep litter composting while for layer deep litter composting, drying, and simple static pile were in practice. The effect of weight reduction and storing period during composting was checked. Three weight reduction cases of compost were constructed to calculate nutrient loading coefficients (NLCs) using data from; i) farm investigation, ii) theoretical P changes (${\Delta}P=0$), and iii) dry basis. Results: During farm investigation of broiler and layer with deep litter composting, there was a 68 and 21% N loss whereas 77 and 33% P loss was found, respectively. In case of layer composting, a loss of 10-56% N and a 52% P loss was observed. Drying manure increased the P concentrations therefore NLCs calculated using dry basis that showed quite higher reductions (67% N; 53% P). Nutrient loss from farm investigation was much higher than reported by Korean Ministry of Environment (ME). Conclusions: Nutrients in manure are decreased when undergo storing or composting process due to microbial action, drying, and leaching. The nutrient load applied to soil is less than the fresh manure, hence the livestock manure management and conservation of environment would be facilitated.

• Journal of Electrical Engineering and Technology
• /
• 제8권6호
• /
• pp.1345-1351
• /
• 2013

Variable iron loss as function of current phase angle of Interior Permanent Magnet Synchronous Motor(IPMSM) was calculated through Curve Fitting Method(CFM). Also, a magnetic flux density distribution of iron core according to current phase angle was analyzed, and an iron loss calculation was performed including harmonic distortion. The experiment was performed by production of non-magnetizing model for the separation of mechanical loss, and the iron loss was calculated by the measurement of input using power analyzer and output power using dynamometer. Some error was generated between experimental results and calculation value, but an iron loss diminution according to current phase angle followed a same pattern. So, errors were generated by measurement, vibration, noise, harmonic distortion loss, etc.

• 한국안전학회지
• /
• 제26권4호
• /
• pp.96-101
• /
• 2011

In previous studies, a system was developed for classifying items of uninsured cost and for generating factors and formulas by item for calculating accident loss costs. However, the loss cost of stopped production was not considered when the system was being developed. In addition, the system which was developed in previous studies had problems such as input error and data collection, owing to numerous input items. Therefore, this study developed a Revised system which considers the loss cost of stopped production, and a Simple system for improving the problems in input errors and data collection. In this study, unquantifiable factors were not considered. Further study that takes these factors into consideration is necessary.

• 수산경영론집
• /
• 제45권2호
• /
• pp.73-83
• /
• 2014

This study estimated quantitatively the loss of the fisheries due to China's illegal fishing that prevailed in the EEZ of the country in recent and has been an object to present a basic data in the implementation of government policy as to strengthen the enforcement capacity, setting up the direction of the crackdown of Chinese through to figure out an objective loss according to that. The analyzed result of this study setting a reasonable scenario, fisheries resources reduction is estimated about 67.5 million ton and the estimated amount of the loss is about 1.3 trillion won. This is 21.2% of about 318.3 ten thousand tons of the total fishery production of the country and accounts for 61.9% compared to coastal and offshore fisheries production. Therefore it is a very serious problem due to China's illegal fishing in Korea fisheries sector. It is significant to the point that estimating the qualitative and quantitative losses that can achieve a realistic and effective policy.

• 한국지반환경공학회 논문집
• /
• 제12권5호
• /
• pp.37-42
• /
• 2011

본 연구는 부산항만 내에 퇴적된 퇴적물에 대한 현재의 성분 및 혐기성 상태에서의 잠재메탄발생량을 평가하기 위해 수행되었다. 부산항만 내 10곳의 지점을 선정하여 퇴적물을 채취하였고, 퇴적물 특성을 파악하기 위해 특성을 강열감량, 원소분석, XRD, XRF 분석을 실시하였다. 모든 특성을 구성성분은 균일하였으며, 강열감량 경우 8~10% 높은 값을 보였다. 총 5개의 시료에 대한 BMP 실험 경우 최대메탄발생량은 11.9~15.5mL methane/g VS로 시료간에 편차가 존재하였다. 기존 연구와 비교 시 음식물과 종이류에 비해 발생되는 메탄양은 작으나 발생속도는 5배에서 20배가량 큰 값을 보여주었다.

• 대한기계학회논문집B
• /
• 제33권7호
• /
• pp.486-494
• /
• 2009

One-dimensional modeling of $CH_4$/air premixed flame was conducted to validate the heat loss model and investigate NOx formation characteristics in the postflame region. The predicted temperature and NO concentration were compared to experimental data and previous heat loss model results using a constant gradient of temperature (100 K/cm). The following conclusions were drawn. In the heat loss model using steady-state heat transfer equation, the numerical results using the effective heat loss coefficient ($h_{eff}$) of $1.0\;W/m^2K$ were in very good agreement with the experiments in terms of temperature and NO concentration. On the other hand, the calculated values using the constant gradient of temperature (100 K/cm) were lower than that in the experiments. Although the effects of heat loss suppress NO production near the flame region, a significant difference in NO concentration was not found compared to that under adiabatic conditions. In the postflame region, however, there were considerable differences in NO emission index as well as the contribution of NO formation mechanisms. In particular, in the range of ${\phi}\;{\geq}\;0.8$, the prompt NO mechanism plays an important role in the NO reduction under the adiabatic condition. On the other hand, the mechanism contributes to the NO production under the heat loss conditions.

• 한국작물학회지
• /
• 제27권4호
• /
• pp.291-295
• /
• 1982

The biosphere of the earth is not only about to overpass the limit to meet the food demand of the world but also the stability of its food production has been also jeopardized by the disasters and pests, especially by the unpredictable weather disasters. In addition the agricultural and industrial pollution against biosphere aggravates the unstability of agricultural production and constitutes a threat in securing the food of the world. In Korea the yield level of crops has been greatly enhanced by the improved agrotechnologies and varietal improvement, but the yield variability due to unfavorable weather events and pests remained unchanged with the change in time. Among weather-related disasters the drought and flood damages has occurred most frequently and impacted most greatly on the agricultural production and its stability. During last decade (1970-l980) the rice production experienced the average annual loss of 0.544 million metric ton which was composed of 0.21 million M/T by climatic disaster, 0.21 million M/T by disease and 0.12 million M/T by insects, and the annual loss of upland crop production from climatic disasters amounted to 0.06 million metric tons. Especially in 1980, the global climatic disasters due to cold or hot temperature endangered the agricultural production all over the world and also the rice production of Korea recorded the unprecedented yield reduction of about 30 percent due to cool summer weather. Nowadays, the unusual weather conditions are prevaling throughout the world, and agro-meteologists predict that the unpredictable cool summer and drought will often attack the rice and other crops in 1980's. To meet the coming weather unstability and to secure the stable crop production, multilateral efforts should be rendered. Therefore, the Korea Society of Crop Science, which commemorates the 20th anniversary of its founding, prepared the symposium on Meteological Stress in Crop Production and its Countermeasures to discuss the decrease in agricultural production due to weather-related disasters and to devise the multilateral counter-measures against the unfavorable weather events.

• 한국IT서비스학회지
• /
• 제21권2호
• /
• pp.97-107
• /
• 2022

Recently, interest in smart factories is increasing. Investments to improve intelligence/automation are also being made continuously in manufacturing plants. Facility automation based on sensor data collection is now essential. In addition, we are operating our factories based on data generated in all areas of production, including production management, facility operation, and quality management, and an integrated standard information system. When producing LCD polarizer products, it is most important to link trace information between data generated by individual production processes. All systems involved in production must ensure that there is no data loss and data integrity is ensured. The large-capacity data collected from individual systems is composed of key values linked to each other. A real-time quality analysis processing system based on connected integrated system data is required. In this study, large-capacity data collection, storage, integration and loss prevention methods were presented for optimization of LCD polarizer production. The identification Risk model of inspection products can be added, and the applicable product model is designed to be continuously expanded. A quality inspection and analysis system that maximizes the yield rate was designed by using the final inspection image of the product using big data technology. In the case of products that are predefined as analysable products, it is designed to be verified with the big data knn analysis model, and individual analysis results are continuously applied to the actual production site to operate in a virtuous cycle structure. Production Optimization was performed by applying it to the currently produced LCD polarizer production line.

• Asian-Australasian Journal of Animal Sciences
• /
• 제16권6호
• /
• pp.794-799
• /
• 2003

A study was conducted on 2102 records of 808 crossbred cows of various genetic groups maintained under 'All India Coordinated Research Project on Cattle' at C C S Haryana Agricultural University, Hisar, over 25 years period (1968-1993) with an objective to assess and compare the amount of percent improvement and heterotic effect for different performance traits in various genetic groups produced under this programme. Survivability sharply and significantly declined from 1/2 to $3/4^th$ bred and further from $3/4^th$ to inter-se bred. This may be due to periodic and management differences in addition to the higher level of exotic inheritance and decreased heterotic effect over the filial generations. Jersey and Holstein Friesian crosses among 1/2 breds and their 50% inheritance among $3/4^th$ and inter-se breds had highest improvement and heterosis in reproduction and production traits respectively. Among inter se bred genetic groups, BFH (I) had no recombination loss in SP and CI, while FJH (I), JFH (I) and FBH (I) had on recombination loss in AFC, LY, LL and PE. The crossbreeding of zebu cows with exotic breeds brings about spectacular improvement in comparison to the performance of zebu breed, while conventional selection over several generation would lead to only modest improvement. In addition to additive effect, there was sufficient heterosis in Jersey crosses for reproduction and Holstein Friesian crosses for production performance. Three breed crosses with exotic inheritance between 50 and 75 percent incorporating genes (25 to 50%) from both of these breeds is the best combination for stabilization.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2338-2343
• /
• 2007

The practical studies on the method of particle contamination control for yield enhancement in the cleanroom were carried out. The method of the contamination control was proposed, which are composed of data collection, data analysis, improvement action, verification, and implement control. The partition check method for data collection and data analysis was used in the cellular phone module production lines. And this method was evaluated by the variation of yield loss between before and after improvement action. In case that the partition check method was applied, the critical process step was selected and yield loss reduction through improvement actions was observed. From these results, it is concluded that the partition check method is effective solution for particle contamination control in the cleanroom production lines.