• Korean Journal of Agricultural Science
• /
• v.10 no.2
• /
• pp.371-381
• /
• 1983

This study is aimed at identifying the economic effects of drainage improvement projects. The total area of poor drainage is equivalent to 170,000ha, 13% of the total area of paddy field in Korea. The development of poor drained paddy is an urgent problem considering the low rate of self-sufficiency of food grain and the limitation of farmer's income increase. Rapid development of Korean economy has brought labor shoriage in rural farming sector. Accordingly farm mechanization is an important agricultural policy to hike labor productivity and to save production costs of rice farming. The expected economic benefits of the drainage improvement project are derived from increasing land productivity, expanding double cropped area and farming the farm mechanization base in paddy fields. The economic and financial rate of return of the project are considered very important decision making criteria for project implementation by resource allocation. Therefore this study covered benefit and cost analysis of the sampled area, the estimated financial rate of returns in $Buy{\check{o}}$ and Jinsung are represented 15% and 51% respectively and the economic rate of returns in both project area are also showing 1% and 26% respectively. The rate of return of the projects has showed an outstanding variance according to the locational and natural characteristics of the project area. As showing the above economic rate of return, $Buy{\check{o}}$ is very low Jinsung is very high. But the financial rate of return of both projects are considered comparatively high. Cosequently, the drainage improvement projects should be promoted from the view point of farm income increase to make narrow the income gap between rural and urban incomes and farm mechanization to solve labor shortage in the rural area.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.3
• /
• pp.321-327
• /
• 2020

Engine oil leaks comprise the largest percentage of the major quality problems that have occurred during the engine production process for military land system equipment over the last two years. To minimize this, it is essential to understand the root cause of the engine oil leakage and perceive the more common leakage area, as well as reduce the quality costs of pre-identification for leaks in the engine assembly process and single items. Therefore, in this study, the mass production quality of engines installed and operated in power equipment was improved by visualizing the engine oil leakage injected with the fluorescent dye and increasing the identification of the engine oil leak phenomenon. For this reason, the possibility of substituting the engine oil was considered and the engine oil was injected with the fluorescent dye. The maintenance was improved by reforming the engine oil injection process and leakage inspection process. Finally, these results suggest that the quality costs between mass production processes can be minimized by ensuring the reliability of military engines by reducing the user's complaints and improving the quality control capabilities of engine manufacturers.

• Journal of the Korea Safety Management & Science
• /
• v.18 no.4
• /
• pp.107-114
• /
• 2016

The efficiency of the purchasing and procurement logistics is important in automotive industry. The rationalization of production system is directly impact on productivity and quality. For this reason importance of logistics is high. Despite we are continuously making effort, our country are still below the level than developed country on logistics efficiency. Rising labor costs is an important factor in increasing logistics costs. So workforce reduction in logistics department is a large part. We deal with A-company inbound logistics, especially procurement logistics in automotive logistics as research object. So in this study we do research on work load balance about workers. We do research on 1,475 kinds of components in procurement process. We applied work load balance algorithm on chassis, final, sequence, trim warehouses workers. According to number of workers and average M/H, algorithm is applied in two ways. After applied work load balance algorithm we reduced numbers of workers from 28 to 20 and improved worker load balance rate from 47.1% to 93.7%.

• Korean Journal of Agricultural Science
• /
• v.10 no.2
• /
• pp.393-405
• /
• 1983

The demand for livestock and poultry products including beef, pork, chicken, egg and milk whose income elasticities are relatively higher than other staple foods, has been increased significantly during the past two decades in response to the remarkable increase in per capita GNP. This trend will be continued during the fifth and the sixth five year economic development plan period beginning with 1982. The annual GNP growth rate will be 7.5% on the average during the next 10 years. It is greatly needed to estimate the demand for beef, pork, chicken egg and milk and to study the feasibilities of domestic production of livestock products for the formulation of adequate policies in order to equate the consumption and the production during the 1980s. So this study reviewed the possible changes in the food consumption patterns during the 1980s, estimated the demand for beef, pork, chicken, egg and milk by using empirical demand functions and finally made suggestions for the formulation of long term price stabilization policies for each livestock, poultry and dairy products through the equilibrium of the quantity of demand for and supply of the products. There are many factors affecting the demand for meats, but this study considered own price, prices of supplements and substitutes and per capita income as the independent variables in the demand equations. It was found that it's own price and income were most significantly affecting factors among others and the degree of substitution effects were remarkably different among the products. According to the meat demand derived in this study, per capita consumption of beef, pork and chicken in the base year 1982 was 11.2kg for total meat, 2.5kg beef, 6.0kg pork and 2.5kg chicken, 106 pieces egg, 15.1kg milk respectively, while those in 1991 were 19.3kg for total meat, 4.8kg beef, 9.6kg pork, 4.9kg chicken, 133pieces egg and 44.1kg milk. It is also predicted through this study that, when the level of production costs be maintained, the domestic production of pork and chicken will meet the demand for them during the fifth and sixth five year economic plan period. However, there will be chronic shortage of beef supply during the coming years. The annual import requirement will be 30,000tons to 40,000tons during the period. In order to stabilize the domestic livestock and poultry and dairy products market, the government should introduce measures to curb the increase in beef consumption by encouraging the consumption of pork and chicken. For this, the livestock production policy measures should be concentrated on : 1) the improvement of infrastructures of beef production by introducing advanced feeding and management technology, subsidies for the establishment of facilities and price support programs for farmers : 2) the development of dairy beef : 3) the reinforcement of the forecast systems for pork and chicken production and consumption.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.53 no.2
• /
• pp.115-125
• /
• 2017

Fuel consumption in fisheries is a primary concern due to environmental effects and costs to fishermen. Much research has been carried out to reduce the fuel consumption related to fishing operations. The fuel consumption of fishing gear in fishing operation is generally related to hydrodynamic resistance on the gear. This research is to propose a low drag generated midwater trawl in terms of the gear design improvement using simulations. The results from the simulation were verified with results that mirrored the model experiments. From the results, the resistance force of the proposed gear decreased to 29% compared to that of the current gear. Furthermore, the gear performance also improved with increased gear mouth compared to the current one. Therefore, the proposed gear will be helpful to reduce the greenhouse gases from fishing operation. It will also contribute to the fishing industry by saving fuel.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.1
• /
• pp.59-66
• /
• 2013

Fillers have been used for printing paper to improve printability, sheet formation and optical properties and to reduce production costs by replacing expensive wood pulps. However, an increased filler content will decrease paper strength because filler particles interfere with fiber-fiber bonding. In order to increase filler content without sacrificing too much paper strength in high filler content papers, the surface of precipitated calcium carbonate (PCC) has been modified by adsorbing anionic polyacrylamide and cationic starch in series. The adsorbed polymer layers would enhance interactions between the filler surface and the fiber surface, improving internal bonding. It was found that the modified PCC increased paper strength at a given filler content compared to the coventional method. Negligible differences in optical properties and formation of paper, filler and fines retention and drainage on the wire section were observed between the modified and the conventional PCC. However, the decreased bulk of paper was observed when the modified PCC was used.

• IE interfaces
• /
• v.17 no.4
• /
• pp.472-481
• /
• 2004

In this paper, we propose a linear programming model of supply planning process for the supply chain collaboration strategy of a company. The amount of its supplying quantity relies on outsourcing suppliers heavily. Conversely, the revenues of those suppliers are highly dependent on the supplying quota from the supply network planning of the company. In order to keep the supply stable through collaboration, the company builds such a policy to guarantee the fairness on revenue between the supplies. For this, the supply network plan should keep the capacity utilization ratio even for all the suppliers. But the production capacities are different and the distribution of molds is disproportional through suppliers, so the supply network plan is not easily established with simple arithmetic processes. Therefore, we developed the linear programming model with those target function and constraints minimizing the costs for holding inventory and penalty of delayed delivery, simultaneously guaranteeing the even capacity utilization through suppliers. The proposed model has been applied to real case and the evaluation for the planning result from the model would be followed in order to make sure that our model guarantee on extracting the supply network plan subordinated to the policy. Also we mention about further studies for improvement of the model.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.05a
• /
• pp.127-131
• /
• 2006

There are being a lot of studies for achievement of high speed Dehydration, high-strength and Lightweight of washing machine in the latest washing machine business. It is essential that Press-joining Strength of Spin Drum Seaming division is improved .to attain that target. Generally, we are using Mechanical press-joining by Seaming and T.I.G (Tungsten Inert Gas) welding among part joint method. Mechanical press-joining method that is mainly using for Stainless Steel (STS430) Drum have lots of merit that consumption of energy is low more than welding and production costs cut down and generation of the corrosion is solved by removing weld zone defect and materials having different properties are enable to join without special equipment. But, it is difficult to realize joint strength required at high speed operation because joint strength of mechanical press-joining method is low remarkably in comparison with welding. Also, there are a lot of analysis difficulties and very limited research is under way due to the dynamic factor such as multistage plastic working, elastic recovery, residual stress etc. The results of this study show optimal joining condition for mechanical press-joining by performing lots of tensile joining strength test with various specimen under multi-change of important design factor such as seaming width, bead area and bead depth etc.

• Journal of Environmental Science International
• /
• v.22 no.3
• /
• pp.269-279
• /
• 2013

In this paper, an environmental assessment was carried out on the whole process of industrial business activities to establish a basic plan for climate change mitigation and energy independency. The whole process was divided into each discharge process in terms of water, air, solid waste, green house gases and refractory organic compounds. The flowcharts and basic unit of process were analysed for three years (2008-2010), being utilized as basic information for the life cycle assessment. It was found that the unit loading for the whole process significantly depends on changes in the operation rate change and highly concentrated wastewater inflow. About 35% of solid waste production was reduced by improving the incineration method with co-combustion in coal boiler, generating about 57% of electricity used for the whole process, and consequently reducing the energy costs. As the eco-efficiency index was found to be more than 1, compared to the previous years, it can be said that improvement in general has taken place.

• Korean Journal of Organic Agriculture
• /
• v.24 no.2
• /
• pp.169-188
• /
• 2016

The purpose of this study is to analyze willingness to pay (WTP) for organic agricultural products. To accomplish the objective of the study, a consumer survey was conducted. Based on the pilot survey results, parametric survival model was used to analyze the WTP for organic products. The estimation results showed that the WTP for organic agricultural products is 1.4-fold when compared with the conventional products, which is lower than the current price by about 30 percent. The analytical results also showed that such variables as gender, recognitions for organic agricultural products, and consumers' income have very significant effects on the WTP, and that there are no differences among WTPs by consumption goals. Based on major findings, the most effective countermeasure was suggested for expanding of organic food consumption through the premium reduction of organic products. Reducing the costs of production and distribution, supporting farmers' income by direct payment system were presented. Furthermore, it is needed to allocate more budget for promoting the consumption and distribution of organic agricultural products, and for enhancing conservation of agricultural environment.