• 대한약침학회지
• /
• 제5권1호
• /
• pp.135-151
• /
• 2002

Objective: This study was eanied out to investigate the effects of Raphani Semen on immuno-response in the mouse model of allergic asthma. Methods: In this study, BALB/C mice were divided into 6 groups: Normal (Non-treated group), Control (Group with not treated after allergic sensitization and induction by ovalbumin), Treat I (Group with the oral administration of saline after allergic sensitization and induction by ovalbumin), Treat n (Allergic asthma group treated with acupuncture (BL 13)), Treat III (Allergic asthma group treated with the oral administration of Raphani Semen) and Treat lV (Allergic asthma group treated with the herbal-acupuncture of Raphani Semen (BL 13)). The effect on cytokine was assessed by measuring cytokine (lL-2, IL-4, IL-5, IL-10, IL-12, IFN-r) in bronchoalveoar lavage fluid(ELISA). ResuJts : The results obtained as follows: 1. The production of Interleukin-2 was decreased significantly in Treat I group, Treat n group and Treat IV group as compared with Control group. 2. The production of Interleukin-4 was decreased significantly in Treat I group, Treat II group and Treat IV group as compared with Control group. Among them. the production of Interleukin-4 was decreased remarkably in Treat IV group as compared with other groups. 3. The production of Interleukin-5 was decreased significantly in Treat I group and Treat IV group as compared with Control group. 4. The production of Interleukin-10 was decreased significantly in Treat I group and Treat III group as compared with Control group. 5. The production of Interleukin-12 was all decreased significantly in Treat I group, Treat n group, Treat m group and Treat IV group as compared with Control group. 6. The production of Intelferon- showed no significant changes in Treat I group, Treat n group. Treat m group and Treat Ⅳ group as compared with Control group. Conclusion: These results show that the production of Interleukin-4, 5 was decreased significantly in aJlergic asthma group treated with the herbal-acupuncture of Raph Semen (BL 13), It is known that inactivity of Th2 cell constrained the revelation and controlled hypersenstive action. As to this mechanism, it is suggested that the herbal-acupuncture of Raphani Semen(BL 13) constrained the revelation of allergic asthma.

• Asian-Australasian Journal of Animal Sciences
• /
• 제5권2호
• /
• pp.341-347
• /
• 1992

Eggs used in this study were obtained from Saudi Arabian Baladi laying hens which were divided into four experimental groups and subjected to the following treatments: Commercial laying ration (17% CP, 3.6% Ca and 0.343%, available P) fed ad libitum as a control (C); Conventional force molting, feed removal for 10 days followed by 18 days full-feed of cracked corn (F); 15 days ad libitum intake of the control ration supplemented, to initiate forced-molt, with 0.35% aluminum as the sulfate (ALS) or the chloride (ALC). The hens were in production for 52 weeks and 17 months of age at the start of the trial and the post-treatment period lasted 36 weeks. During the treatment period F and AL treated groups had similar egg and shell weight, egg surface area, shell thickness and shell weight per unit of surface area but significantly (p<0.05) lower than the control. F had significantly (p<0.05) the highest and the control the lowest Haugh unit values whereas AL fed groups had significantly (p<0.05) lower meat spot incidence compared with the control which tended to have higher value than F group. ALC and F had significantly (p<0.05) the lowest yolk color grade whereas ALC had significantly (p<0.05) lower egg index than ALS and the control. During the post-treatment period the control had significantly (p<0.05) the highest egg index and blood spots incidence and ALS the lowest shell diensity compared with other groups. ALS had significantly (p<0.05) lower shell weight than ALC and the control whereas F and AL treated hens had significantly (p<0.05) the highest Haugh unit values and yolk color grades respectively. F had significantly (p<0.05) lower meat spots incidence than ALC and the control. The same results were observed for ALS compared with the control.

• 대한산업공학회지
• /
• 제28권1호
• /
• pp.1-13
• /
• 2002

We study a multi-component production/inventory system in which individual components are made to meet various demand types. We assume that the demands arrive according to a Poisson process, but there is a fixed probability that a demand requests a particular kit of different components. Each component is produced by a flow line with several stations. The production of each component is operated by the CONWIP control mechanism. To analyse this system, we propose an approximation method based on aggregation method. In application of the aggregation method, a product-form approximation technique as well as a matrix-geometric method is used. Comparisons with simulation show that the approximation method provides fairly good results.

• Asian-Australasian Journal of Animal Sciences
• /
• 제21권1호
• /
• pp.144-154
• /
• 2008

The rumen microbial ecosystem produces methane as a result of anaerobic fermentation. Methanogenesis in the rumen is thought to represent a 2-12% loss of energy intake and is estimated to be about 15% of total atmospheric methane emissions. While methanogenesis in the rumen is conducted by methanogens, PCR-based techniques have recently detected many uncultured methanogens which have a broader phylogenetic range than cultured strains isolated from the rumen. Strategies for reduction of methane emissions from the rumen have been proposed. These include 1) control of components in feed, 2) application of feed additives and 3) biological control of rumen fermentation. In any case, although it could be possible that repression of hydrogen-producing reactions leads to abatement of methane production, repression of hydrogen-producing reactions means repression of the activity of rumen fermentation and leads to restrained digestibility of carbohydrates and suppression of microbial growth. Thus, in order to reduce the flow of hydrogen into methane production, hydrogen should be diverted into propionate production via lactate or fumarate.

• 한국국방경영분석학회지
• /
• 제24권2호
• /
• pp.162-169
• /
• 1998

This study presents an single machine scheduling algorithm minimize lateness of product by controlling machining speed. Generally, production scheduling uses the information of process planning. But the production scheduling algorithm has not considered the control of machining speed in its procedures. Therefore, the purpose of this study is to consider the machining speed in production scheduling algorithm for efficient production scheduling. Machining time and machining cost required to manufacture a piece of a product are expressed as a unimodal convex function with respect to machining speed, so it has minimal point at minimum time speed or the minimum cost speed. Therefore, because of considering the machining cost, the control of machining speed for the algorithm is executed between minimum speed and maximum speed. An example is demonstrated to explain the algorithm.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.52.1-52
• /
• 2001

System establishment using a network may be a decisive factor both for creating a flexible production system and increasing reliability and serve as a basis for setting up of a management system that will make the designing, maintenance, and repair easier. It is therefore imperative to develop a protocol which is simple to use for communications and connections among different devices. The objectives of this study is to establish communications protocol stack that will enable to conduct an effective monitoring of production facilities and to secure flexibility of reduction control system, and to improve the working ratio of the production facilities by centralization of communications system through effective collecting and storing of the diversified data of multi-type and multi-device production facilities.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.135-139
• /
• 1992

Control of tool-environment interaction force to comply the robot system to an environment is of vital in many automated process. This paper presents the implementation of an adaptive force control with commercial robot system in two dimensional contour following task. A model reference adaptive control system, combined with the linear compensators, is implemented. That is, a use of adaptive control is to provide an auxiliary control system so that the contour following performance can be improved from that of using linear control system only. Hyperstability is used to derive the adaptive control law. Experimental verification of the proposed control system is obtained using PUMA 560 robot system. Data obtained experimentally shows that the use of additional adaptive control system improves the contour following performance about 30% in RMS contact force errors upon that of the system controlled by the linear compensators only.

• 제어로봇시스템학회논문지
• /
• 제5권1호
• /
• pp.54-61
• /
• 1999

Objective of the research is to put the vast and complex fault tracking knowledge of human experts in semiconductor production line into the knowledge base of computer system. We mined the fault tracking knowledge of domain experts(engineers of production line) for the construction of knowledge base of the expert system. Object oriented fact models which increase the extensibility and reusability have been built. The rules are designed to perform the fault diagnosis of the items in production device. We have exploited the evidence accumulation method to assign check priority in rules. The major contribution is in the overall design and implementation of the nile base and related facts of the expert system in object oriented paradigm for the application of the system in fault diagnosis in semiconductor production line.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.539-542
• /
• 2005

We report how to establish the dynamic index for production control in a pilot fabrication over versatile and diverse production environments. We used dynamic index provided by a simulation model to monitor production performance. When production control is abnormal, the information system prompts administrators to classify these abnormal situations. In addition, the trend over the operation index is continuously reviewed in short-term and long-term. This simulation model is handy at setting goal for a versatile and diverse pilot production fab.

• 대한산업공학회지
• /
• 제40권2호
• /
• pp.233-239
• /
• 2014

This paper presents an extended EMQ model which determines an optimal production run length in an deteriorating production process. The production process is subject to a random deterioration from an in-control state to an out-of-control state and thus producing some proportion of defective items. Defective items produced are re-processed in the rework process to convert them into non-defectives. Through the mathematical modeling, an optimal solution minimizing the average cost per unit time as well as minimum average cost are derived. Numerical experiment is carried out to examine the behavior of the proposed model depending on model parameters.