• Journal of the Korea Safety Management & Science
• /
• v.6 no.3
• /
• pp.211-235
• /
• 2004

Component based design is perceived as a key technology for developing advanced real-time systems in a both cost- and time effective manner. Already today, component based design is seen to increase software productivity, by reducing the amount of effort needed to update and maintain systems, by packaging solutions for re-use, and easing distribution. Nowdays, a thousand and one companies in If(Information Technology) industry such as Sl(System Integration) and software development companies, regardless of scale of their projects, has spent their time and endeavor on developing reusable business logic. The component software is the outcome of software developers effort on overcoming this problem; the component software is the way propositioned for quick and easy implementation of software. In addition, there has been lots of investment on researching and developing the software development methodology and leading If companies has released new standard technologies to help with component development. For instance, COM(Component Object Model) and DCOM(Distribute COM) technology of Microsoft and EJB(Enterprise Java Beans) technology of Sun Microsystems has turned up. Component-Based Development (CBD) has not redeemed its promises of reuse and flexibility. Reuse is inhibited due to problems such as component retrieval, architectural mismatch, and application specificness. Component-based systems are flexible in the sense that components can be replaced and fine-tuned, but only under the assumption that the software architecture remains stable during the system's lifetime. In this paper, It suggest that systems composed of components should be generated from functional and nonfunctional requirements rather than being composed out of existing or newly developed components. about implements and accomplishes the modeling for the Product Control component development by applying CCD(Contract-Collaboration Diagram), one of component development methodology, to MRP(Material Requirement Planning) System

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.3
• /
• pp.57-63
• /
• 2008

As diverse memory cards based on NAND flash memory are getting popularity with consumer electronics such as digital camera, camcorder and MP3 player the compatibility problems between a newly developed memory card and existent host systems have become a main obstacle to time-to-market delivery of product. The common practice for memory card compatibility test is to use a real host system as a test bed. As an improved solution, an FPGA-based prototyping board can be used for emulating host systems. However, the above approaches require a long set-up time and have limitations in representing various host and device systems. In this paper, we propose a co-validation environment for compatibility test between memory card and host system using formal modeling based on Esterel language and co-simulation methodology. Finally, we demonstrate the usefulness of the proposed environment with a case study of real memory card development.

• Korean Journal of Veterinary Research
• /
• v.45 no.2
• /
• pp.223-231
• /
• 2005

A quantitative risk assessment tool was used to provide estimates of the probability that foot-and-mouth (FMD) virus-contaminated, smuggled animal products are fed to susceptible swine in Korea. Sensitivity analyses were conducted to attempt to distinguish between parameter uncertainty and variability, using different assumptions on the effect of cooking at home, the effect of the fresh meat, and the effect of heat treatment at garbage processing facility. The median risk estimate was about 20.1% with a mean value of 27.4%. In a scenario regarding all beef and pork were considered as fresh meat the estimated median risk was 3.4%. The risk was greatly dependent on the survival parameters of the FMD virus during the cooking or heat treatment at garbage processing facility. Uncertainty about the proportion of garbage that is likely contaminated with FMD had a major positive influence on the risk, whereas conversion rate representing the size of a load had a major negative effect. This model was very useful in assessing the risk explored. However, the model also requires enhancements, such as the availability of more accurate data to verify the various assumptions considered such as FMD prevalence in a specific country, proportion of garbage which is recycled as feed, proportion of food discarded as garbage. Other factors including the effect of selection of animals for slaughter, ante- and post-mortem inspection, the domestic distribution of the smuggled products, and susceptible animals other than pigs, are need to be taken into account in the future model development.

• Journal of the Society of Naval Architects of Korea
• /
• v.45 no.4
• /
• pp.441-454
• /
• 2008

Shipyard design and equipments layout problem, which are directly linked with the productivity of ship production, is an important issue serving as reference data of production plan for later massive production of ships. So far in many cases, design of a shipyard has been relying on the experienced engineers in shipbuilding, resulting in sporadic and poorly organized processes. And thus, economic losses as well as trials and errors in that accord have been pointed out as inevitable problems. This paper extracts a checklist of major elements to fine tune the shipbuilding yard designing process and the input/output data based on the simulation based shipbuilding yard layout designing framework and methodology proposed in existing researches, and executed initial architecture to develop software that integrates all the relevant processes and designing tools. In this course, both user request and design data by the steps are arranged and organized in the proposed layout design template form. In addition, simulation is done based on the parent shipbuilding process planning and scheduling data of the ship product, shipbuilding process and work stage facilities that constitute shipbuilding yard, and design items are verified and optimized with the layout and equipment list showing optimal process planning and scheduling effects. All the contents of this paper are based on simulation based shipbuilding yard layout designing methodology, and initial architecture processes are based on object oriented development methodology and system engineering methods.

• Journal of Korean Society of Water and Wastewater
• /
• v.30 no.5
• /
• pp.561-569
• /
• 2016

In this paper a concept of the paradigm shift in the operations of Water and Wastewater systems regarding the production and usage of water was introduced. Based on this concept the interrelationships between the water quality in the upper basin of NakDong River relative to Busan and the degree of satisfaction of the customers on the water supply service in Busan were modeled using the System Dynamics modeling methodology. SamRangJin basin area was determined as the upper basin of Busan after analyzing the relationships between the water quality of MoolGeum water intake point and water quality data of various mid- and upper water intake points along NakDong River. The amount of contaminants generated in SamRangJin basin was modeled using the Gross Regional Domestic Product in the area and the treated amount was calculated using the efficiency of wastewater treatment and the degree of improvement of environmental condition per investment. The water quality at MoolGeum water intake point was modeled to take the effects of the remaining amount of contaminants after treatment and the non-point source contaminants in SamRangJin basin. Using the developed System Dynamics model the effects of the investment for the improvement of environmental condition in SamRangJin basin were compared to the case of alternate water source development for Busan in terms of the degree of satisfaction of the customers on the water supply service in Busan.

• Journal of Korean Society of Water and Wastewater
• /
• v.31 no.4
• /
• pp.321-328
• /
• 2017

Recently EC-MBR (Elctrocoagulation - Membrane Bio Reactor) has been suggested as one of alternative processes to overcome membrane fouling problems. Most important operational parameters in the EC-MBR are known to current density and contact time. Their effect on membrane filtration performances has been reported well, however, quantitative interrelationship between both parameters not been investigated yet. The purpose of this study is to give a kinetic model suggesting the current density and the contact time required to reduce the membrane fouling. The 4 different set of current densities (2.5, 6, 12 and $24A/m^2$) and contact times (0, 2, 6 and 12 hr) were selected as operational parameters. After each electro-coagulation under the 16 different conditions, a series of membrane filtration was carried out. The membrane fouling decreased as the current density and contact time increased, Total fouling resistances under different conditions, $R_t(=R_c+R_f)$ were calculated and compared to those of the controls ($R_0$), which were calculated from the data of experiments without electro-coagulation. A kinetic approach for the fouling reduction rate ($R_t/R_0$) was carried out and the equation ${\rho}^{0.46}_it=7.0$ was obtained, which means that the product of current density and the contact time needed to reduce the fouling in certain amounts (in this study, 10% of fouling reduction) is always constant.

• Journal of Computational Design and Engineering
• /
• v.3 no.2
• /
• pp.161-177
• /
• 2016

In history based parametric CAD modeling systems, persistent identification of the topological entities after design modification is mandatory to keep the design intent by recording model creation history and modification history. Persistent identification of geometric and topological entities is necessary in the product design phase as well as in the re-evaluation stage. For the identification, entities should be named first according to the methodology which will be applicable for all the entities unconditionally. After successive feature operations on a part body, topology based persistent identification mechanism generates ambiguity problem that usually stems from topology splitting and topology merging. Solving the ambiguity problem needs a complex method which is a combination of topology and geometry. Topology is used to assign the basic name to the entities. And geometry is used for the ambiguity solving between the entities. In the macro parametrics approach of iCAD lab of KAIST a topology based persistent identification mechanism is applied which will solve the ambiguity problem arising from topology splitting and also in case of topology merging. Here, a method is proposed where no geometry comparison is necessary for topology merging. The present research is focused on the enhancement of the persistent identification schema for the support of ambiguity problem especially of topology splitting problem and topology merging problem. It also focused on basic naming of pattern features.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.5
• /
• pp.721-731
• /
• 2018

Manpower in domestic construction sites is becoming more and more aging. Various methods have been devised to prevent productivity and quality deterioration of construction due to absence of skilled workers and difficulty in supplying manpower. Especially, many researchers study various methods such as Machine Guidance (MG) and Remote Machine Control to improve productivity and quality. Although many prior studies have been conducted since the advent of MG, There is lack of field test in a difficult site to stakeout. In this study, field test of MG excavator was carried out at difficult site to stakeout, and productivity analysis and quality evaluation were conducted. As a result of the analysis of productivity, the minimum value was 20.5%, the maximum value was 56.9%, and the average productivity in 4 days was 38.3% higher than the standard product. As a result of the analysis of quality, the horizontal error ${\pm}1cm$ and the vertical error ${\pm}2cm$ confirmed in the previous study were verified.

• Proceedings of the CALSEC Conference
• /
• 1999.07a
• /
• pp.215-231
• /
• 1999

CALS, Enterprise Integration, Virtual Enterprise 등을 구현하는데 있어서 BPR (business process re-engineering), ISP (Information Strategy Planning), Analysis/Design 등은 필수 적이다. 이러한 BPR, ISP, A/D 추진하는데 있어서 각 단계의 산출물은 유연하게 연계되지 못한다. 그 이유는 각 단계가 접근하는 초점이 다르고, 산출물의 성격이 다르며, 무엇보다도 각 단계의 전문가가 다르기 때문에 발생한다. 현재 기업이 각 단계를 추진할 때에는 반복적인 피드백을 통하여 정보를 공유하거나, 각 단계의 정보 연계가 제대로 이루어지지 않는다. 이러한 문제를 해결하기 위하여 BPR-ISP-A/D의 정보 연계를 유연하게 하기 위하여 PPO (Product-Process-Organization) 객체 진화에 의한 통합 방법론을 제안 하고자 한다. 그 과정은 1) Real world 정보를 PPO 객체로 정의하고, 2) PPO 객체를 기반으로 BPR을 수행하여 TO-BE model 을 만드는 동시에, 3) PPO TO-BE model과 함께 IT Architecture를 정의하며, 4) PPO 객체를 기반으로 Analysis and Design 과정을 통하여 Application system 객체 및 Data 객체를 정의한다. 이때 PPO 객체는 Real-world 객체에서 Application system 객체 및 Data 객체로 진화하게 되고 BPR-ISP-A/D의 seamless 통합이 이루어진다. 여기서, 단계 1) 과 2)는 System Engineering을 통하여 이루어진다. ARIS(Architecture of Integrated Information System, Dr. A-W. Scheer, 1998)개념을 도입하여 실세계를 정해진 규약에 따라 Model로 Mapping하고, 생성된 Model을 바탕으로 BPR을 수행하여 개선된 Model을 산출해 낸다. 단계 3)은, IE (Information Engineering, James Martine, 1990) 의 ISP가 도입되어, 설계업무를 지원하기위한 기본적인 시스템 구조를 구상하게 된다. 이와 함께 IT Model을 구성하게 되는데, 객체지향적 접근 방법으로 Model을 생성하고 UML(Unified Modeling Language)을 Tool로 사용한다. 단계 4)는 Software Engineering 관점으로 접근한다. 이는 최종산물이라고 볼 수 있는 설계업무 지원 시스템을 Design하는 과정으로, 시스템에 사용될 데이터를 Design하는 과정과, 데이터를 기반으로 한 기능을 Design하는 과정으로 나눈다. 이를 통해 생성된 Model에 따라 최종적으로 Coding을 통하여 실제 시스템을 구축하게 된다.

• Journal of the Korea Society for Simulation
• /
• v.20 no.3
• /
• pp.119-127
• /
• 2011

Overhaul and repair service means the sequential processes of disassembly, repair and reassembly for a product which has been used for a long time. Overhaul is required for the companies producing airplanes, ships, trains, military weapons and heavy industrial equipments which are very expensive and have a long life cycle. The most important performance measure of the overhaul repair shop is usually the lead time. Thus, how to design the manufacturing system to meet the delivery date is a major concern in overhaul repair shop. This paper introduces the case study of an overhaul repair shop producing military weapon systems with the 3D simulation tool, $QUEST^{TM}$. At first, the characteristics of overhaul shop and what should be considered for simulation modeling are explained. Then, various simulation scenarios including two types of disassembly systems, one is flow line system and the other is cell system, are discussed with the results of simulation experiments.