• Journal of Korean Institute of Industrial Engineers
• /
• v.39 no.3
• /
• pp.156-162
• /
• 2013

Social manufacturing architecture is based on information delivery through social media and SNS, PLM and social platform, crowd source and knowledge base on whole phase of product life cycle. Although advanced social manufacturing issues are rising globally, its technology emerging into domestic industry is likely to be slow. We focused to review technological changes and R&D trend, patent issues, and then suggest assignments and advices to be practiced for social manufacturing modeling.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2496-2498
• /
• 2001

광 디스크 channel상에서 RSPC의 error correction capability를 확률적인 계산 방법으로 계산하는 데는 많은 어려움이 있다. 그 이유는 바로 광 디스크 channel이 burst error channel이기 때문인데, 이 burst error를 어떻게 다루는 가에 따라 그 error correction capability는 사뭇 달라진다. 이 논문에서는 Sony의 dust error distribution[1] 아래에서 4-state Morkov Chain[2]로 modeling하고 그 결과를 가지고 burst error를 channel의 특성과 ECC format의 특성에 맞게 제어할 수 있는 확률적인 계산방법을 소개하고 그것을 simulation하고자 한다.

• Journal of the Korean Society of Mechanical Technology
• /
• v.13 no.1
• /
• pp.89-94
• /
• 2011

The swivel joint is an important part in hydraulic machine. The analysis on the material was made using the EDAX method to localize the swivel joint. Also, the modeling and design drawing were finalized with application of 3 dimensional measurement and structure analysis. The prototype product based on design drawing was made with cutting and grinding process. No abnormalities were found in the prototype product through the durability test and measurement. The localized swivel joint with light weight, price reduction and diversification was developed in this study.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.6 no.3
• /
• pp.124-131
• /
• 2011

There are many researches in unmanned vehicles such as UGV(Unmanned Ground Vehicle), AUV(Autonomous Underwater Vehicle). In these researches, differential wheeled mobile robots are mainly used to develop the experimental stage algorithm because of the simplicity of modeling and control. Usually a commercial product used in the study, but in order to operate a commercial product to the restrictions because there would need to use a fixed protocol. Using the microprocessor makes the internal sensors(encoder and INS) and external sensors(ultrasonic sensors, infrared sensors) operate and to determine commands for robot operation. This paper propose a mobile robot design for suitable purpose.

• Journal of Industrial Convergence
• /
• v.1 no.2
• /
• pp.107-124
• /
• 2003

With rapid growth and competition of electronic commerce through internet, various buying types and business models are being appeared. In this paper, we studied group buying which is new business model to consumer and factors affecting on trust and participation of group buying. The followings are the regression result of this study. First, familiarity factor, customer service factor, seal of security and product value factor made a significant effect on trust. Second, familiarity factor, perceived reputation factor, customer service factor, seal of security and product value factor made a significant effect on participation of group buying. Third, trust of group buying made a significant effect on participation of group buying. In this study, modeling and empirical test were implemented about structure of trust and participation of group buying. We can know where our group buying strategies should focus and which factor we should improve.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.10
• /
• pp.32-39
• /
• 1995

The design of injection molded polymeric parts has been done empirically, since it requires profound knowledge about the moldability and causal effects on the properties of the part, which are not available to designers through current CAD systems. An interactive computer-based design system is developed in order to realize the concept of rational design for the productivity and quality of mold making. The knowledge-based CAD system is constructed by adding the knowledge -base module for mold feature synthesis and appropriate CAE programs for mold design analysis in order to provide designers, at the initial design stage, with comprehensive process knowledge for feature synthesis, performance analysis and feature-based geometric modeling. A knowledge-based CAD system is a new tool which enables the concurrent design with integrated and balanced design decisions at the initial design stage of injection molding.

• Transactions of Materials Processing
• /
• v.14 no.4 s.76
• /
• pp.384-391
• /
• 2005

The nickel-based alloy Nimonic 80A possesses the excellent strength, and the resistance against corrosion, creep and oxidation at high temperature. Its products are used in aerospace engineering, marine engineering and power generation, etc. Control of forging parameters such as strain, strain rate, temperature and holding time is important because change of the microstructure in hot working affects the mechanical properties. Change of the microstructure evolves by recovery, recrystallization and grain growth phenomena. The dynamic recrystallization evolution has been studied in the temperature range of $950\~1250^{\circ}C$ and strain rate range of $0.05\~5s^{-1}$ using hot compression tests. The metadynamic recrystallization and grain growth evolution has been studied in the temperature range of $950\~1250^{\circ}C$ and strain rate range $0.05,\;5s^{-1}$, holding time range of 5, 10, 100, 600 sec using hot compression tests. Modeling equations are proposed to represent the flow curve, recrystallized grain size, recrystallized fraction and grain growth phenomena by various tests. Parameters in modeling equations are expressed as a function of the Zener-Hollomon parameter. The modeling equation for grain growth is expressed as a function of the initial grain size and holding time. The modeling equations developed were combined with thermo-viscoplastic finite element modeling to predict the microstructure change evolution during hot forging process. The grain size predicted from FE simulation results is compared with results obtained in field product.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.1
• /
• pp.77-86
• /
• 2017

Industry Foundation Classes(IFC) is the core product schema for ensuring the interoperability of information in Building Information Modeling(BIM) environment. However, since current IFC is mainly focused on building structure. there are limitations in the generation of functional information of components when applied to civil infrastructures. Previous studies have proposed IFC-based new entities for the civil infrastructures, it takes long time to support them in BIM authoring software packages. In this study, we proposed practical rules to apply IFC-based information modeling using BIM authoring software and additional new entities for the civil infrastructure through attributes and information mapping. The availabilities of proposed method were examined using the rail and sleeper information models based on an extended IFC data schema for the railway infrastructures.

• Journal of KIISE:Computing Practices and Letters
• /
• v.10 no.2
• /
• pp.156-173
• /
• 2004

Business process should support the execution of collaboration process with agility and flexibility through the integration of enterprise inner or outer applications and human resources from the collaborative workflow view. Although the dependency of enterprise activities to the automated system has been increasing, human role is as important as ever. In the workflow modelling this human role is emphasized and the structure to control human error by analysing decision-making itself is needed. Also, through the collaboration of activities agile and effective communication should be constructed, eventually by the combination and coordination of activities to the aimed process the product quality should be improved. This paper classifies human errors can be occurred in collaborative workflow by applying GEMS(Generic Error Modelling System) to control them, and suggests human error control method through hybrid based modelling as well. On this base collaborative workflow modeling tool is designed and implemented. Using this modelling methodology it is possible to workflow modeling could be supported considering human characteristics has a tendency of human error to be controlled.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.108-108
• /
• 2017

In this study, biocomposite filaments with agricultural by-products can be used in extrusion-based 3D (Three-dimensional) printing. Extrusion-based 3D printing stands as a promising technique owing to its versatility. We hypothesized that bio-filament composite consisted of something derived from agricultural by-products could be used as 3D printing materials that could overcome the drawbacks of PCL (poly-caprolactone). Bio-filament mixed with PCL and agricultural by-products was defined as r-PCL in this study. In order to find it out the optimal mixing ratio of filaments, we had investigated PCL, r-PCL 10%, r-PCL 20%, r-PCL 50% separately. The morphological and chemical characteristics of the filaments were analyzed by FE-SEM (Field emission scanning electron microscope) and EDX (Energy-dispersive X-Ray spectroscopy), and the mechanical properties were evaluated by stress-strain curve, water contact angle, and cytotoxicity analysis. Results of this study have been shown as a promising way to produce eco-friendly bio-filaments composite for FDM (Fused deposition modeling) method based 3D printing technology. Thus, we could establish biomimetic scaffolds based on bio-printer filaments mixed with agricultural by-product.