• Korean Journal of Agricultural Science
• /
• v.18 no.2
• /
• pp.148-156
• /
• 1991

This study was carried out to investigate the storage conditions and methods required for commercialization of Jeung-Pyon. The storage characteristics of Jeung-Pyon were examined with Universal Testing Machine (UTM, Instron model 1000) for textural properties during storage of under the conditions such as sealing, nonsealing, and temperatures. The differences in storage characteristics on the different varieties and years of rices were not shown. When the Jeung-Pyon was lost it's quality as a commercial product, the measured value of UTM was increased as hardness 0.74Kg to 1.0Kg, gumminess 0.23Kg to 0.59Kg, chewiness 6Kg.mm to 18Kg.mm, but decreased in adhesiveness 0.65Kg.mm to 0.40Kg.mm, cohesiveness 0.61 to 0.34, springiness 41mm to 32mm. The nonsealed Jeung-Pyon was lost it's quality for storing at room temperature because of the case-hardening after 2 days. In the case of sealed Jeung-Pyon, the case-hardening phenomena by the evaporation of moisture was not occured, therefore it was a significant factor for an extension in sealed Jeung-Pyon. The shelf-life of sealed Jeung-Pyon was 20 days and 5 days respectively during storage at $-20^{\circ}C$ and $20^{\circ}C$. The sealed Jeung-Pyon stored at $5^{\circ}C$ was lost it's quality, in consideration of cold chain this temperature was suitable for retrogradation of starch. The Jeung-Pyon sealed with air and mosture proof packaging material stored at the accelerated condition as 92% R.H. and $35^{\circ}C$ lost it's quality within two or three days.

• The Journal of Korean Academy of Prosthodontics
• /
• v.38 no.2
• /
• pp.169-177
• /
• 2000

The purpose of this study was to compare the retention of complete cast crown over amalgam ores, composite resin cores, and cast gold cores when cemented with three different luting agents. Eighteen core specimens each of amalgam(Bestaloy, Dong Myung, Seoul, Korea), composite resin (Z100, 3M Dental product, st. Paul, Minn) and type IV gold alloy (Ba-4, Heesung Engelhard Corp., Korea) were made in a customized milling stainless steel die. A wax pattern with a loop attached to occlusal surface was made for each core and a type II gold alloy casting was fabricated. The castings which had clinically acceptable marginal fit were used as test samples. The following luting cements were used to cement cast crowns on each core material : (1) zinc phosphate cement (Confi-dental Products Co., USA) (2) glass-ionomer cement (Fuji Plus, GC Industrial Corp., Tokyo, Japan) (3) resin cement (Panavia 21, Kuraray Co., USA). All cements were mixed according to manufacturers' instructions. A static load of 5kg was then applied for 10 minutes on the crowns. All specimens were stored in saline solution for 24 hours at $37^{\circ}C$ and thermocycled for 500 cycles. After storage and cycling, the tensile bond strengths were measured by using a universal testing machine (Instron Corp., Canton, Mass.) at a crosshead speed of 0.5mm/min. The results were as follows 1. The retentive strength of resin cement was the highest of alt three types of cement for resin core (p<0.05). 2. There was no statistical difference among the retentive strengths of three cements for amalgam core (p>0.05). 3. The retentive strength of resin cement was higher than that of zinc phosphate for cast core, but there was no difference between the retentive strength of glass ionomer cement and those of rein and zinc phosphate cement. 4. The retentive strength of the zinc phosphate cement for amalgam core was the highest of all type of cores.

• Journal of the Korean Society of Costume
• /
• v.6
• /
• pp.7-26
• /
• 1982

Investigation for industrial revolution has been recognized as an important issue of historical science, since industrial revolution itself was a historical moment in modern economic society and in the forming of modern capitalistic culture. If clothing culture had been developed in close relation to social culture. industrial revolution which gave a base for modern capitalistic culture, would be a birth of modern clothing as well as a moment for modernization of western clothing. As it takes for granted that industrial revolution, historical phenomenon is a developmental base of modern clothing culture. This study tried to enlighten the origin of modern clothing culture phenomenon with investigation of industrial revolution as a historical moment in modern clothing culture through documental study. Historian's point of view and method of studying are important when we investigate the clothing phenomenon. Although culture phenomenon of industrial revolution has been evaluated usually through socialogical aspect, studying for clothing culture phenomenon must be carried out on aethetical as well as well as sociological aspect, on account of dualism of clothing, as it is social and artistic nature. In 19th century, there were technical improvement, changing patterns of production, changing social relation and beginning of mass culture. At the same time clothing culture phenomenon was changed in relation to modern capitalistic society. The findings of the study could be summarized as follows. 1. Technical improvement in textile industry and fitting process brought about mechanization of clothing industry. 2. Appearance of popular clothing culture made it easy to spread to various classes of society. 3. Development of transportation system and communication channel made it internationalization of western clothing. 4. Recognition of importance in functional style of clothing. 5. The pursuit of modern aesthetics made rapid changing mode of clothing. Above distinctive features of modern clothing culture were derived from by-product of machinary culture, mass culture, internationalism, rapidly changing mode of various culture during industrial revolution. Industrial revolution was a change of the material world as well as in industry owing to machine advent, then the culture part that displayed directly these changes was the plastic arts of living that mould the material. The problem of clothing construction caused by industrial revolution was solved by pursuing the functional aesthetics. Clothing phenomenon as a process of value transfer participates mass culture in closs relation to general change of various culture caused by industrial revolution. Therefore western clothing gained the qualities of modern culture, condensed as function, and popularity in the process of modernization.

• Journal of the Korea Society for Simulation
• /
• v.17 no.2
• /
• pp.63-74
• /
• 2008

The design of best efficient production process is common requirements of the production strategy department and the process planning department to maximize the revenue and accomplish target production volumes in the production periods. And they use several general methods for that-line-balancing, removing of the bottle-neck process, facility ramp-up, increasing of the worker's utilization, etc. But, those methods have depended on analytic, static and arithmetic calculations, yet. So, irregular work-waiting time causing the delay time isn't include in extracting production capacity, especially in the line production process. The work-waiting time is changed irregularly along the variation of each machine and very important for calculate real product lead-time and forecasting target production volumes. At this thesis, i'm going to mention the importance of the delay time of conveyor system which can be extracted by discrete-event simulation. And suggest it as a new main variable that must be considered at designing new production system. Then experimented and tested that's effects in the H-company case, conveyor based line production process.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.9
• /
• pp.1351-1357
• /
• 2016

Green tea (Camellia sinensis) seed extract (GTSE) was prepared under various pretreatment conditions and used to investigate its extraction yield and anti-yeast activity. Anti-yeast activity of GTSE from seeds with or without the coats was the same, whereas the extraction yield was slightly higher in extract from seeds without the coat. Anti-yeast activity of GTSE from seeds with different water contents or particle sizes was the same, whereas the extraction yield was highest in extract from seeds with 7.3% moisture or a smaller particle size. Anti-yeast activity of defatted green tea seed extract (DGTSE) was the same as that of GTSE. Extraction yield was higher in DGTSE from defatted seeds by the oil press machine compared to hexane extraction. Defatted green tea seed (DGTS), a by-product from the oil extraction process, is a good natural source of anti-yeast preservative. The extraction yield and anti-yeast activity of DGTSE were investigated using various extraction solvents, temperatures, and times. The results show that water was an economic extraction solvent, and anti-yeast activity of DGTSE was unstable at $90^{\circ}C$. These results suggest that water, extraction temperature of $50^{\circ}C$, and extraction time of 4 h were the most efficient for extraction of anti-yeast compounds from DGTS.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.10a
• /
• pp.145-149
• /
• 2004

It is necessary for managing a perfect process for degasing aluminum molten metal according to the increase of a grade of aluminum and its alloy products. There are some methods that have been used to manage a degasing process in recent years, such as an injection method that uses aluminum molten metal powder and chemicals supplier and input method that supplies argon and nitrogen, or chlorine gas by using a gas blow-tube. However, these methods show some problems, and it shows that it is a difficult process to handle. pollution due to the producing a lot of toxic gases like chlorine and fluoride gas. irregular effects, and lowering work efficiency due to the excessive processing time. The problems that are the most fatal are the producing a lot of sludge due to the reaction of aluminum molten metal with chemicals. loss of metals, and decreasing the life of refractory materials. In order to solve these problems. this paper develops a technology that is related to aluminum continuous casting molten metal and monolithic degasing apparatus. A degasing apparatus developed in this study improved the exist ing methods and prevented environmental pollution wi th smokeless. odor less, and harmlessness by using a new method that applies argon and nitrogen gas in which the methods used in the West and Japan are eliminated. The developed method can significantly reduce product faults that are caused by the production of gas and oxidation because it uses a preprocessed molten metal with chemicals. In addition. the amount of the produced sludge can also be reduced by 60-80% maximum compared with the existing methods. Then. it makes it possible to minimize the loss of metals. Moreover. the molten metal processing and settling time is also shortened by comparing it with the existing methods that are applied by using chemicals. In addition, it does much to improve the workers' health, safety and environment because there is no pollution. The improvement of productivity and prevent ion effects of disaster from the results of the development can be summarized as follows. It will contribute to the process rationalization because it does not have any unnecessary processes that the molten metal will be moved to an agitator by using a ladle and returned to process for degasing like the existing process due to the monolithic configuration. There are no floating impurities due to the oxidation caused by the contact with the air as same as the existing process. In addition. it can protect the blending of precipitation impurities. Because it has a monolithic configuration. it can avoid the use of additional energy to compensate the temperature decreasing about 60t that is caused by the moving of molten metal. It is not necessary to invest an extra facilities in order to discharge the gas generated from a degasing process by using an agitator. The working environment can be improved by the hospitable air in the factory because the molten metal is almost not exposed in the interior of the area.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.10
• /
• pp.206-211
• /
• 2020

Tungsten alloys are used widely in general industrial fields, but they are difficult to cast, so products are manufactured using powder metallurgy. In this study, a mixed powder of tungsten, nickel, and iron homogenized using a ball mill was added to pure water as a solvent, and PVA as a binder was added to prepare a spray drying mixture. The mixed liquid was prepared using a spraying machine. A study was carried out to produce a granular powder that can reduce the variations between products during the molding and sintering process of the powder metallurgy method. A preliminary experiment was conducted to confirm the influence of the variables in the granulation process. Through the preliminary test results, this experiment was performed with the volume of solvent of the spray drying the mixture as an independent variable, and granular powder having a mean particle size similar to that of the existing mass-production conditions and an increased apparent density was prepared. In addition, a pilot test was conducted for the molding and sintering process. The improved granular powder reduced the characteristic variation (weight variation) of the mass-produced product.

• The KIPS Transactions:PartD
• /
• v.14D no.4 s.114
• /
• pp.381-388
• /
• 2007

Consumers changed to the subject to produce a digital contents as data transmission technique is advanced and a digital machine is diffused variously. Users are interested greatly in a user creative movie (UCM) production among various online contents. The UCM production method which uses the music and picture is the method that users make the UCM more easily. However, the UCM production service has the problem that any association does not exist in the music and picture and that the picture changes according to fixed time interval without the relation at a music rhythm. To solve this problem, we propose the UCM production method which uses a music analysis and picture analysis in the paper. A music analysis finds a picture change time according to the rhythm and a picture analysis finds the association of the picture. A music analysis finds strong parts of the sound which uses Root-Mean-Square (RMS). And a picture analysis classifies the picture as a scenery picture and people picture which uses structure simplicity of the picture(SSP) and face region detection. A picture analysis got correct result of 86.4% in the experiment and we can finds the association at each picture and arranges the sequence which the picture appears. Therefore, if we use a music and picture analysis at the UCM production, users may make natural and efficient movie.

• Journal of Biosystems Engineering
• /
• v.28 no.6
• /
• pp.517-524
• /
• 2003

There have been worldwide research and development efforts to automate various processes of bio-production and those efforts will be expanded with priority given to tasks which require high intensive labor or produce high value-added product and tasks under hostile environment. In the field of bio-production capabilities of the versatility and robustness of automated system have been major bottlenecks along with economical efficiency. This paper introduces a new concept of automation based on tole-operation, which can provide solutions to overcome inherent difficulties in automating bio-production processes. Operator(farmer), computer, and automatic machinery share their roles utilizing their maximum merits to accomplish given tasks successfully. Among processes of greenhouse watermelon cultivation tasks such as pruning, watering, pesticide application, and harvest with loading were chosen based on the required labor intensiveness and functional similarities to realize the proposed concept. The developed system was composed of 5 major hardware modules such as wireless remote monitoring and task control module, wireless remote image acquisition and data transmission module, gantry system equipped with 4 d.o.f. Cartesian type robotic manipulator, exchangeable modular type end-effectors, and guided watermelon loading and storage module. The system was operated through the graphic user interface using touch screen monitor and wireless data communication among operator, computer, and machine. The proposed system showed practical and feasible way of automation in the field of volatile bio-production process.

• Archives of design research
• /
• v.14 no.3
• /
• pp.145-154
• /
• 2001

These days, the products like Walkman, mobile phone, notebook PC, PDA are moving together with our body, and in the imaginary world like internet, our other self, Avatar is moving in place of our body on the cyber world. These products are related with our human body, and when considering the ones, attached to the human body, and having the meaning of mental combination like these, as the combination of the human and the products, it is necessary to examine these products in approaching them with respect to the combination relation between the human and the products. As a result of examining we can understand that the products, said to combine with the human body, are coming oui steadily. and recently, the inclination on the combination and the movement appears strongly. As this background, there are a breakdown of dichotomy thought, mixed sexual imitation, cyber culture, techno culture. concept of informative nomands, phenomenon which the division of human and machine becomes vague. and the miniaturization of products. imitation of human, phenomenon that the Inclination on the combination with human is more accelerated by networking. These products combine with human body at each wearing type in the various forms. Its functions become multi-layered, and closer to the human body physically. or its communication becomes high·graded and, they have the recombined form through the existing products which the human has And, they communicate each other. have the strong fashionable property, and the characteristics like the imaginary product to imitate the human body and substitute for the human behave.