• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.283-283
• /
• 2010

Smart street light controller is a product with advance micro controller base for energy saving in conventional street lighting systems. Intelligent Street light controller are specially developed for automation and energy saving in conventional street light systems and lighting systems. It is so designed that it operates on sunrise & sun set timings according to longitude of particular location with facilitate to set month wise civil twilight timings to cope up with all seasons. Dimming (Power down) mode selection switch on/off at fixed times with relay or contactor. Night dimming, staggering and intelligent control reduces burn hours and increases the lifetime of lamps with about 30% and low annual operating cost type base are among the most inexpensive wireless technologies available. Low initial costs As PLC wireless, there is no need to establish cable connection.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.115.4-115
• /
• 2002

The disc spinning machine is a specific production machine for discs of automobile. Using this machine, we could product superior wheels in hardness and strength to the press method and the machine made process time shorten by one-pass spinning. But, the spinning machine became huge because it needed maximum pressure during the process and this can badly affect the lifetime of components. In this paper, hydraulic control system was designed to make up for defects of spinning machine and to shorten overusing power. Experimental hydraulic control system was used to simulate the wheel disc spinning process and the control performance was evaluated for the required forces and positions.

• 한국기계가공학회지
• /
• 제8권1호
• /
• pp.3-9
• /
• 2009

Recently, a high speed cutting is essential requirement to satisfy latest demand of high precision product and machining of hard materials. However heat generation by high speed rotation causes many problems. The machining error and shortening spindle lifetime by thermal stress is typical example. Generation of heat is mostly caused by sliding at the rotor and bearing. For minimization of heat generation at bearing, decision of the condition of proper lubrication is necessary. The thermal study about 40,000rpm spindle by changing the condition of oil-air lubrication method is carried out in this paper. The results of this paper can be used effectively in the decision of oil-air lubrication condition of other types of spindle for machine tools.

• 한국자동차공학회논문집
• /
• 제22권4호
• /
• pp.145-151
• /
• 2014

Modern vehicle has a lot of ECU(Electronic Control Unit) products to control many parts such as engine, transmission, brake, body and so on. ECU quality is one of important factors related to vehicle quality and driver's safety. Based on Bath-tub curve which presents failure rate during product lifetime, we designed and applied Accelerated Run-in Test into manufacturing line by simulating stress amount to ECU and developing the required software and efficient test equipment for mass production. This test makes ECU products stressed through electrical and thermal stresses under excessive driving condition, which induce potential initial failure of components in the ECU during production. The outcome until these days proved that Acceleration Run-in Test have reduced initial failure rates and increased quality of ECU products in the field outstandingly.

• Natural Product Sciences
• /
• 제26권1호
• /
• pp.10-27
• /
• 2020

Endophytes are defined as microorganisms that spend part of lifetime interior of plant tissues without causing negative effects. They have been used for agricultural purpose, biofuel production, bioremediation, medication, etc. In particular, endophytes have been emerged as a good source for bioactive secondary metabolites. A large number of secondary metabolites are currently being reported. In this report, we focus on the secondary metabolites that were originated from endophytic fungi inhabiting medicinal plants. They were classified into several groups such as nitrogenous compounds, steroids, sulfide-containing metabolites, terpenoids, polyketides, and miscellaneous for discussion of chemical structures and biological activities.

• 산업경영시스템학회지
• /
• 제13권21호
• /
• pp.133-141
• /
• 1990

Human blood is a perishable product : it has a legal lifetime of 21 days from collection, during which it can be used for transfusion to a Patient of the same type, and after which it has to be discarded. Therefore, blood must be supplied safely and effectively because it is one of the medical resources which keep humanlife. In this study, the effects of blood issuing policies on average inventory levels and average age of blood at transfusion are determined by simulation applied the theory of absorbing Markov chains. And as a practical study, the daily demand distribution of blood is estimated by using the data of B General Hospital. The distribution estimated follows poisson distribution and the estimator of parameter estimated from the poisson distribution is 0.762. Simulation is done by using the parameter. The most important problem when control blood is the amount of outdata. So we compared random policy with Modified LIFO and Modified FIFO by using outdata. As a results it is shown that Modified LIFO and Modified FIFO by using outdata. As a results it Is shown that Modified LIFO and Modified FIFO present better issuing policy than Random Policy.

• 소성∙가공
• /
• 제9권1호
• /
• pp.43-51
• /
• 2000

The die wear is one of the main factors affecting product accuracy and die life in hot forging process. It is desired to analyze die wear by developing wear prediction method combined with FE-simulatin and experiment. Lots of researches have been done into the wear analysis of cold forging die, and the results of those researches were successful, but there have been little applications to hot forging die giving successful results. That is because hot forging process has many factors influencing die wear, and there was not accurate in-process data. In this research, change of die surface hardness by thermal softening during the lifetime was obtained by experiment, and hardness distribution of cross section was measured. This wear analysis was applied to hot forging die, and gave comparatively good results compared with actual wear profile.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.137-141
• /
• 2004

Many monopropellant thrusters use a catalyst for decompose the propellant, hydrazine. The catalyst directly affects the thruster performances and lifetime. Therefore, it is important to confirm that the catalyst is suitable for our thrusters. Until 2002, we used She1l405 catalyst, for satellite RCS thrusters, and H-IIA and M-V launch vehicle upper-stage RCS thrusters. In 2002, however, Shell Chemical Inc. ceased manufacturing She1l405 catalyst and transferred the product to AEROJET, where it was renamed S405. We subsequently investigated the characteristics of AEROJET's S405 catalyst and SOLVAY's KC12GA catalyst, (SOLVAY is a Belgian chemical company, and KC12GA is used for ASTRIUM's thruster) and conducted thruster firing tests using the new catalysts. After conducting, we confirm that the KC12GA catalyst was suitable for our thrusters, and decided to use KC12GA for two satellite programs.

• 대한안전경영과학회지
• /
• 제4권3호
• /
• pp.131-140
• /
• 2002

Today's environment of enterprise is changing, They have to face customer' demands with the right product, the right service and supply them at the right time. And also cut down logistics and inventory cost and bring up the profit as much as they can. This means the change of putting enterprise first in importance to putting customer first importance. therefore to correspond to customer's demand, shorting lead time is becoming a essential condition. The answer to this changes of environment is supply chain management. In this paper, It consolidates the necessity on a LTV(Life Time Value) and analyzes data which is concerned of Customer Value. Under the these environments, defines the LTV(Life Time Value) rule that can improve the customer value. We solved this problems using AHP(Analytic Hierarchy Process) for consistency at relationship matrix, AHP(Analytic Hierarchy Process) is based on Saaty's consistency rate. If consistency rate is under 0.1 point, preference rate's weights are acceptable. This study develop a program for AHP weights and support Satty's consistency rate.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.737-740
• /
• 2006

A cement which is used in construction and a concrete which is a hydration product of cement is considered anti-environmental materials because of lots of $CO_2$ emission in progress of producing and making them. But a concrete absorbs the $CO_2$ gas in atmosphere after hydration and in its lifetime. Based on Papadakis' theses, this research is carried on calculation of the $CO_2$ absorption quantity in concrete. Also, the emission of $CO_2$ was calculated by cement manufacture. As a result, It is said that the $CO_2$ which was emitted during cement manufacturing, was absorbed the 53% of emission quantity by the carbonation of concrete.