• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.9
• /
• pp.11-20
• /
• 1998

High-speed complex-number arithmetic units are essential to baseband signal processing of modern digital communication systems such as channel equalization, timing recovery, modulation and demodulation. In this paper, a new complex-number multiplication algorithm is proposed, which is based on redundant binary (RB) arithmetic combined with radix-4 Booth recoding scheme. The proposed algorithm reduces the number of partial product by one-half as compared with the conventional direct method using real-number multipliers and adders. It also leads to a highly parallel architecture and simplified circuit, resulting in high-speed operation and low power dissipation. To demonstrate the proposed algorithm, a prototype complex-number multiplier-accumulator (CMAC) core with 10-bit operands has been designed using 0.8-$\mu\textrm{m}$ N-Well CMOS technology. The designed CMAC core contains about 18,000 transistors on the area of about 1.60 ${\times}$ 1.93 $\textrm{mm}^2$. The functional and speed test results show that it can operate with 120-MHz clock at V$\sub$DD/=3.3-V, and its power consumption is given to about 63-mW.

• Industrial Engineering and Management Systems
• /
• v.9 no.3
• /
• pp.285-293
• /
• 2010

To obtain visible and traceable information from the supply chain, HW/SW standards for the EPC global network, which process electronic product code (EPC) data read from Radio frequency identification (RFID) tags, are regarded as the de facto industry standard. Supply chain participants install information service systems and provide logistics information to partners by following the EPCglobal architecture framework. Although quality of service (QoS) is essential for providing dependable and scalable services as pointed out by Auto-ID Lab, only a few models for the performance analysis of QoS-related work have been developed in the context of EPC information service systems. Specifically, doing so allows alternative design choices to be tested in an easy and cost-effective manner and can highlight potential performance problems in designs long before any construction costs are incurred. Thus, in this study we construct a model of an EPC information service system for the purposes of performance analysis and designing a dependable system. We also develop a set of building blocks for analytical performance models. To illustrate how the model works, we determine the characteristics of an EPC information service system and then select a combination of these proven modeling concepts. We construct a performance model that considers the response time and shows how to derive meaningful performance values. Finally, we compare the analytical results to measurements of the EPC information service system.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.5 no.1
• /
• pp.132-146
• /
• 2013

For several decades, Asian nations such as Korea, Japan and China have been leading the shipbuilding industry since the decline in Europe and America. However, several developing countries such as India, Brazil, etc. are going to make an entrance into the shipbuilding industry. These developing countries are finding technical partners or information providers because they are in situation of little experiences and technologies. Now, the shipbuilding engineering companies of shipbuilding advanced countries are getting a chance of engineering business against those developing countries. The starting point of this business model is green field project for the construction of new shipyard. This business model is started with a design of the shipyard layout. For the conducting of the shipyard layout design, four kinds of engineering parts are required. Those are civil engineering, building engineering, utility engineering and production layout engineering. Among these parts, production layout engineering is most important because its result is the foundation of the other engineering parts and it determines the shipyard capacity during the shipyard operation lifecycle. Previous researches about the shipyard layout design are out of the range from the business requirements because most research cases are in the tower of ivory, which means that there are little consideration of real ship and shipbuilding operation. In this paper, a shipyard layout design for preliminary phase is conducted for the target of newly planned shipyard at Venezuela of South America with an integrated method that is capable of dealing with actual master data from the shipyard. The layout design method of this paper is differentiated from the previous researches in that the actual product data from the target ship and the actual shipbuilding operation data are used for the required area estimation.

• Journal of Construction Engineering and Project Management
• /
• v.1 no.3
• /
• pp.1-8
• /
• 2011

Available data on the recent global financial crisis (GFC) show that it lasted between the second quarter (Q2) of 2007 and the fourth quarter (Q4) of 2009. Australia is one of the first economies to fully recover from this crisis. This study explorles the role played by the Australian construction industry in stimulating economic growth during the recession. In order to investigate the macro-variability trend during the financial crisis, data were collected and analysed relating to the quarterly GDP of Australia and selected countries between Q1 2000 and Q4 2009. Specifically, changes in the construction industry's GDP were compared with aggregate GDP changes in Australian economy and similar indices in the 'Group of 7' (G7) countries and Organisation for Economic Co-operation and Development (OECD) countries. Moreover, specific attention was focused on Germany, France, Japan, United States of America (USA) and United Kingdom (UK). Graphical and Pearson's correlation methods were used to analyse the relationships between changes in construction GDP and Australia's overall economic growth during the recession. In addition, an attempt was made to develop a regression model for predicting economic growth during the recent recession using changes in gross fixed capital formation (GFCF), changes in construction GDP and the impact of these changes on national economy. Analysis shows a slight contraction in construction activities during the crisis; however construction triggered significant growth in the economy during the crisis period and afterwards. This appears to be the major difference between Australia and other major economies that have experienced a longer recession.

• Journal of Environmental Impact Assessment
• /
• v.21 no.1
• /
• pp.119-132
• /
• 2012

Biodiversity is a key element of ecosystem of which function provides essential product and service in human life. In the course since development projects often causes damages to biodiversity, environmental impact assessment technique must be capable of accurately assessing potential impact from flora and fauna and to entire ecosystem. Korea needs improvement of its assessment technique that is compatible with Korean environmental regulatory standard that is generally stricter than that of most countries. This study attempts to explore both domestic and overseas biodiversity assessment techniques and analyze each stage of environmental impact assessment. The data is collected from numbers of literatures selected by navigating both domestic and overseas literature database with certain keywords. Among the 44 selected papers, overseas publications outnumber those of domestics, and there are more researches on assessment methodology of biodiversity than assessment tool and model. In terms of environmental impact assessment, the number of papers on environmental impact forecast exceeds the numbers of papers on current state of environment and the impact minimizing solution. Therefore, contents and trends of those researches in the different stages of environmental impact assessment discussed in this paper not only suggest potential impact on biodiversity and minimization solutions in detail, but is also a valuable resource particularly for biodiversity relevant environmental assessment technique improvement in Korea. Proposing of a new direction of improvement in biodiversity assessment techniques makes this study significant, and further research for preservation of biodiversity should follow up to provide an improvement scheme for biodiversity assessment techniques in the future.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.30 no.3
• /
• pp.95-102
• /
• 2018

As a recent technical approach, a high-speed planing hull was tried to realize a friction reducing system by simultaneously actuating the triple streamlined step hull form in association with optimum speed of 35 knot planing for fishing boat. In this approach, the streamlined step hull form with triple structure of type was attached under the bottom of high-speed planing hull, while a friction resistance is reduced in the process of running at the speed of 35 knot. In addition, this research was to make a performance test as to the manufactured product and acquire the purposed values and the development items. Actually, after manufacturing the desired prototype of high-speed planing hull, the significant items, fuel efficiency (second) and amount of fuel consumption (degree) including maximum speed (knot) were estimated for a performance test. And tensile strength (MPa) and bend strength (MPa) as to the completed prototype like a high speed planing hull were also acquired during the test.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.10
• /
• pp.5919-5924
• /
• 2014

Accumulated dross adhered to the cutting support degrades the cutting accuracy and aggravates the working environment by reducing the efficiency of the dust collector. Furthermore, the cutting machine and product can be damaged by the scattering of molten metal. In this study, an attempt was made to increase the productivity of steel cutting process and improve the working environment by dross control. The dross adhesion characteristics were invested by a cutting experiment and the design concept for a dross removal machine was devised. Finally, a cutting support cleaning system and its operating algorithm were developed. The applicability of the developed system was examined and verified by a long-term field test after installation of the plasma arc cutting system of a shipyard.

• Proceedings of the KAIS Fall Conference
• /
• 2003.11a
• /
• pp.185-190
• /
• 2003

Due to the rapid growth of Internet, means of communication with customers in a traditional customer support environment such as telephone calls are being replaced by mainly e-mail in a Web-based customer support system. Although such a Web-based support is efficient and promises potential benefits for firms, including reduced transaction costs, reduced time, and high quality of support, there are some difficulties associated with responding to many types of customer’s inbound e-mails appropriately .As many types of e-mail are received, considerable attention is being paid to methods for increasing the efficiency of managing and responding e-mails. This research proposes an intelligent system for managing customer’s inbound e-mails in organizations by applying case based reasoning technique for responding to various customers' inbound e-mails more effectively. In this approach, a case is represented as a frame-typed data structure corresponding to an inbound e-mail, keywords, and its reply e-mail. In the retrieval procedure, keywords and affinity set is developed to index a case, and then the case is represented as a vector, a case vector. Also, cosines value is calculated to measure the similarity between a new inbound e-mail and the cases in the case base. In the adaptation procedure, we provide several adaptation strategies to adapt and modify the retrieved case. The strategies guide to make an outbound e-mail using product databases, databases for customer support, etc. Additionally, the Web-based system architecture is proposed to implement our methodology. The proposed methodology and system will be helpful for developing more efficient Web-based customer support.

• The KIPS Transactions:PartC
• /
• v.8C no.6
• /
• pp.855-864
• /
• 2001

With the increasing importance and complexity of EC (Electronic Commerce) across the Internet, the need and expectation for intelligent software agents to support both consumers and suppliers through the whole process of EC are growing rapidly. To realize the intelligent EC. a multiagent based EC system. which includes foundational technologies such as the establishment of standard product ontology the definition of message and negotiation protocol and brockering, is required. In this paper we propose an intelligent EC System named ICOMA(Intelligent electronic CO mmerce system based on Multi-Agent) as an open infrastructure of multiagent-based EC. Concretely we have proposed. designed and implemented an architecture of multiagent-based EC system including 6-types of agents message protocol for inter-agent negotiation, personalized produst retrieval and filtering., We have confirmed the effectiveness of the system through experiments.

• Journal of Korean Society of Rural Planning
• /
• v.18 no.3
• /
• pp.149-164
• /
• 2012

The purpose of the present study is to construct a rural development strategy from the nexus between spatial changes in specialized crops and suitable cultivation area of the crops. This paper pays particular attention to identify product life cycle of specialized crops in rural areas and estimate the impact of climate change on alterations in spatial distribution of the crops. In order to do so, first of all, this study applies multi-level model (Random coefficient model) to estimate the regional coefficient of five orchard crops. It utilizes the data 1995 to 2010 Korea Agricultural Census. Futhermore, it also adopts overlay analysis by ArcGIS to identify the development path of the crops and the relationship with climate change. Based on the results, it suggests a mechanism activating regional agriculture. The findings propose re-searching and relocating specialized regions of the crops. Especially, it proves each rural area can drive the new agricultural strategy to strengthen regional agriculture by estimating the relationship between development of specialized crops and suitable cultivation areas. For instance, shifting specialized crops in particular regions and enriching genetic or species varieties can be primary measures and it will contribute to improve the reliable base for income sources in the rural communities. This paper also offers specific policy implications regarding rural development plans in response to crops' life cycle and climate changes.