• Korean Journal of Computational Design and Engineering
• /
• v.7 no.1
• /
• pp.66-73
• /
• 2002

The purpose of this study is to propose a new process model for architects and suppliers in AEC(Architectural, Engineering and Construction) industry, which comes from its utilization of a distributed database. Information used by participants of this process is not held in one singular application sewer, but in tile databases of multiple participants. This study addresses the problem of coping with dynamic information changes that architects face when designing with increasingly time-sensitive product information from multiple suppliers. It also describes the new distributed architecture for design representation, and outlines a corresponding process model to address the needs architectural designers during design and procurement phases. The feasibility of the process was tested in a prototype system that combines existing technologies, which allows for an objects transfer from the Web to the CAD application.

• Journal of Information Technology Applications and Management
• /
• v.21 no.2
• /
• pp.1-14
• /
• 2014

For years, businesses have realized that story can persuade customers, familiarize people with the brand or the product, inspire team members and also mean big economic value. Storytelling, however, is regarded as such area depending only on the story director or writer's creativity and thus minimum efforts have been given to information technology development for supporting business storytelling process. This study aims to review existing information technologies for both traditional and relatively new storytelling genres, and regards their implications when applied to business storytelling. As the result of the qualitative study, three kinds of business storytelling supporting system architectures-brainstorming, writing manin story, participatory storytelling-are suggested and discussions on further works are briefly mentioned.

• ETRI Journal
• /
• v.29 no.5
• /
• pp.670-672
• /
• 2007

An ultra-wideband low-noise amplifier is proposed with operation up to 8.2 GHz. The amplifier is fabricated with a 0.18-${\mu}m$ CMOS process and adopts a two-stage cascode architecture and a simplified Chebyshev filter for high gain, wide band, input-impedance matching, and low noise. The gain of 19.2 dB and minimum noise figure of 3.3 dB are measured over 3.4 to 8.2 GHz while consuming 17.3 mW of power. The Proposed UWB LNA achieves a measured power-gain bandwidth product of 399.4 GHz.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.4 no.3
• /
• pp.228-240
• /
• 2012

Morphing is a geometric interpolation technique that is often used by the animation industry to transform one form into another seemingly seamlessly. It does this by producing a large number of 'intermediate' forms between the two 'extreme' or 'parent' forms. It has already been shown that morphing technique can be a powerful tool for form design and as such can be a useful addition to the armoury of product designers. Morphing procedure itself is simple and consists of straightforward linear interpolation. However, establishing the correspondence between vertices of the parent models is one of the most difficult and important tasks during a morphing process. This paper discusses the mesh-merging method employed for this process as against the already established mesh-regularising method. It has been found that the merging method minimises the need for manual manipulation, allowing automation to a large extent.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.1 no.2
• /
• pp.89-94
• /
• 2009

The current focus of development in industrial Computational Fluid Dynamics (CFD) is integration of CFD into Computer-Aided product development, geometrical optimisation, robust design and similar. On the other hand, in CFD research aims to extend the boundaries of practical engineering use in "non-traditional" areas. Requirements of computational flexibility and code integration are contradictory: a change of coding paradigm, with object orientation, library components, equation mimicking is proposed as a way forward. This paper describes OpenFOAM, a C++ object oriented library for Computational Continuum Mechanics (CCM) developed by the author. Efficient and flexible implementation of complex physical models is achieved by mimicking the form of partial differential equation in software, with code functionality provided in library form. Open Source deployment and development model allows the user to achieve desired versatility in physical modeling without the sacrifice of complex geometry support and execution efficiency.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.3B
• /
• pp.584-591
• /
• 2000

In distributed arithmetic-based architecture for an inner product between two length-N vectors, the size of the ROM increases exponentially with N. Moreover, the ROMs are generally the bottleneck of speed, especially when their size is large. In this paper, a ROM size reduction technique for DA( distributed arithmetic ) is proposed. The proposed method is based on modified OBC( offset binary coding) and control circuit reduction technique. by simulations, it is shown that the use of the proposed technique can result in reduction in the number of gates up to 50%.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.05a
• /
• pp.17-21
• /
• 2003

This paper presents a CAD interface system that imports CAD model data and exports input information to a CAPP(Compute Aided Process Planning) system to generate a sequence for block assembly operations. In developing this system we use an open architecture CAD kernel, OpenCASCASE. The functions of the system developed are visualization of the product, definition of relations between parts, and generation of relation graph and input file for CAPP. The functions are demonstrated with a simple example.

• Journal of the Korean Society of Safety
• /
• v.4 no.1
• /
• pp.91-98
• /
• 1989

Today, the conception of building architecture is changing the conception that it is a kind of product and the operator of construction try to produce excellent building through developing efficiency and materials of building component. This study improves the problematic point of the extenor tile setting, through making on experiment on the method of it and purposes doing to do the exterior tile setting of good quality as it selects out of the most conformable the method. The experimental materials choose the tile of 60$\times$108mm size which are using frequently in the exterior tile setting and mortar is made from sand of Han river and potland cement, which apply the volume mixing of the ratio 1：3. The water cement ratio (W/C)is made up 62％ The methods of tile setting utilise the method of the tile setting and laying the method of the tile improved setting and laying, the method ol the pressing adhesion, the method of the improved pressing adhesion and the method of setting adherent (the method of VIBRATOR).

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2005.05a
• /
• pp.139-148
• /
• 2005

EPC를 탑재한 RFID 형태의 스마트객체를 이용한 물류 시스템을 구축하기 위해서는 시스템 구성 요소간의 거래에 필수적인 RFID 객체의 PML 데이터를 표현하고 검색요구에 대응하는 RFID 정보서비스의 설계 및 관리가 매우 중요하다. EPC기반 RFID 정보서비스는 네트워크상의 정보시스템들에 보안과 운영의 이유로 분산되어 있는 RFID 객체 정보들을 검색하여 사용자가 요구하는 결과를 반환하는 역할을 담당한다. 하지만 RFID 객체 정보의 표준화된 표현과 처리, 그리고 분산처리로 인한 통신량과 처리시간과다의 문제가 존재한다. 이에 대해서 본 연구는 물류시스템의 PML 데이터의 표현 및 사용, 검색패턴을 분석하고, 분석 결과를 기반으로 미들웨어를 이용하는 분산형 RFID 객체 데이터 관리 및 RFID 객체 정보서비스 구조를 설계하고 제시하였다. 단일형 및 통합형 RFID 정보서비스 구조를 제시하였다.

• Journal of the Korea Furniture Society
• /
• v.20 no.5
• /
• pp.533-542
• /
• 2009

The space is generally the discontinuation space without being understood agreed by some people. In this time, expressing transparency has various significances in furniture design because modern people want transparence and space due to the complication, numerous unreasonable facts and the lack of honesty in the society. Philip Johnson's Glass House in 1946 influenced architecture, interior, furniture and life article to use transparent materials and space that is being until currently development. The transparency which comes to be preferred clearly means to develop the society continuously. It can be more liberal, honest, and transparent society. The trend appeared in furniture design has meaning as the representative product. This research has perceptional transparency(visible transparency), abstract transparency through space(phenomenal transparency), overlap of surface element, display of line element, image using dot, and changing the image of various spaces.