• KIEAE Journal
• /
• v.7 no.4
• /
• pp.135-140
• /
• 2007

In this study we settled the trouble of the MgO board of existence by this research. We changed the wooden one of the main ingredient of a board to a perlite and a mineral particle in the aluminum hydroxide group and proceeded with a study to physical character and fire resistance efficiency improvement. The result yellowing phenomenon could be improved and it was possible to reduce size decrease of pin hole and the frequency of occurrence. We found out that the in case of absorbed amount added 5~8% corresponding to the weight decreases the acrylic group emulsion suddenly. So this product is improved with the bending strength and water-resistance. After behavior stop time measurement of a mouse for experiments was measured at the time of a gas harmful effect test, an improved MgO board appeared more highly for an average of 138 seconds compared with a board of existence.

• Proceedings of the IEEK Conference
• /
• 2000.11b
• /
• pp.116-119
• /
• 2000

The Process of Inner Product has been widely used in a DSP. But it is difficult to implement by a dedicated hardware because it needs many computation steps for multiplication and addition. To reduce these steps, it is essential to design efficient hardware architecture. This paper proposes the design method of adder-based distributed arithmetic for implementation of DCT module and the automatic design of summation-network which is a core block in the proposed design method. Finally, it shows that the proposed design method is more efficient than a ROM-based distributed arithmetic which is the typical design method.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.10
• /
• pp.132-140
• /
• 1997

This paper proposes systolic array architectures for compuataion of the 1-D and 2-D discrete wavelet transform (DWT). The proposed systolic array for compuataion of the 1-D DWT consists of L processing element (PE) arrays, where the PE array denotes the systolic array for computation of the one level DWT. The proposed PE array computes only the product terms that are required for further computation and the outputs of low and high frequency filters are computed in alternate clock cycles. Therefore, the proposed architecuter can compute the low and high frequency outputs using a single architecture. The proposed systolic array for computation of the 2-D DWT consists of two systolic array architectures for comutation of the 1-D DWT and memory unit. The required time and hardware cost of the proposed systolic arrays are comparable to those of the conventional architectures. However, the conventional architectures need extra processing units whereas the proposed architectures fo not. The proposed architectures can be applied to subband decomposition by simply changing the filter coefficients.

• Korean Journal of Computational Design and Engineering
• /
• v.5 no.1
• /
• pp.1-11
• /
• 2000

The purpose of Computer Aided Design is to design good products as quickly as possible. To do this, it is important to reuse the old designs and build on them. Most engineering designers, therefore. hale studied methods for reusing old designs, and the results of their study hale been applied to new designs Unfortunately, this only involves reuse of geometric data without design knowledge. If they can design products with the geometric data, including design knowledge, of the old designed and share them through the Internet, design efficiency will be improved. In other words, one way to improve designer's productivity is to share design information that includes knowledge and scattered data across design offices. This paper introduces a shared design environment with distributed knowledge-base. A product design environment based on distributed knowledge-base is proposed, which integrates the CORBA, OLE and WWW as the network architecture, a 3D CAD system, and an expert system shell. A design example of the lens barrel of a projection television is implemented to verify the idea.

• Korean Journal of Computational Design and Engineering
• /
• v.5 no.1
• /
• pp.12-22
• /
• 2000

Network and Internet technology opens up another domain for building future CAD/CAM environment. The environment will be global, network-centric, and spatially distributed. In this paper, we present an approach for network-centric feature-based modeling in a distributed design environment. The presented approach combines the current feature-based modeling technique with distributed computing and communication technology for supporting product modeling and collaborative design activities over the network. The approach is implemented in a client/server architecture, in which Web-enabled feature modeling clients, neutral feature model server, and other applications communicate with one another via a standard communication protocol. The paper discusses how the neutral feature model supports multiple views and maintains naming consistency between geometric entities of the server and clients. Moreover, it explains how to minimize the network delay between the server and client according to incremental feature modeling operations.

• The International Journal of Costume Culture
• /
• v.5 no.2
• /
• pp.1-14
• /
• 2002

The first purpose of this research is to investigate the functionalistic concept through the general consideration of Functionalism, and to study the art's aesthetic value of functionalistic expressionist artists implication and form in terms of architecture and product design. Secondly, it analyzes the implication and shape of Functionalism towards 'Art to Wear', which can be explained as a mixture of fashion and art. The results are as follows; First, functionalistic 'Art to Wear' of Mechanical Analogy appears to have futuristic inclination stressing the significance of geometric shapes and machine aesthetics. It uses new materials, and reduce an unnecessary work of art to convey more accurate, concrete and effective character of form. Secondly, functionalistic 'Art to Wear' of Organic Analogy regards natural elements as important to pursue the warm human nature. Also, it appears to be free and comforting forms of Functionalism through an organic silhouette. Thirdly, functionalistic 'Art to Wear' of Moral Analogy excludes excessive ornaments, and includes the implication of appropriate and purposive purity which serves for practical function.

• Journal of the Ergonomics Society of Korea
• /
• v.22 no.2
• /
• pp.29-44
• /
• 2003

A variety of research has been conducted on anthropometric dimensions and their applications to various products and space architecture, Also robust research has been conducted on various parts of human body and the possibility of applications. However, research on the specific dimensions regarding fingers and characteristics of hands have rarely been conducted in Korea. In addition, except for the NASA Anthropometric Source Book that suggests measures for specific purposes such as gloves and hand-operated device, almost no literature can be found on this topic, The primary objective of this study was thus to provide anthropometric dimensions of Korean hands and fingers and recommend appropriate product design solutions for human hands. Six hundred Korean male and female subjects aging from 11 to 93 were selected, Thirteen different hands and fingers were measured along with demographic data(e.g., age, stature, weight} to determine the relationships among these obtained data, The results of this study should be considered in ergonomic design for every hand-used products and hand-operated control devices.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.242-247
• /
• 2009

The present study has been conducted to reduce the cold air drying rate. According to the cold air drying method, the quality-excellent product could be made and there would be little change of color, taste and smell. As compared with the hot air drying, the cold air drying equipment has the superior dehumidification in a constant drying zone. However, in a falling drying zone that equipment is not energy-efficient because the drying period could be longer by the dehumidificated.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.236-241
• /
• 2009

After analyzing the characteristics of the cooling dryer, the mixed cooling dryer was developed by adding the desiccant dryer which supplement the cooling dryer's demerits. Also, the hybrid desiccant cooling dryer was developed to use effectively the exhaust heat energy of the cooling dryer. It could make a more that 20 percent reduction in energy compared with the mixed desiccant cooling dryer. It has become essential to supply this equipment and search the suitable drying product.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.242-248
• /
• 1987

Recently, a quite large number of investigation is published on the subject of Flexible Manufacturing System which can cope with the volatile market demand and the variety of product. Minimum requirement of designing FMS is depicted and by investigating the communication system between the machine tool and the cell control computer, ana between the central computer and the cell control computer, when it is formed as a sub-system of an FEM, the software can be evolved to the control software of the total Flexible Manufacturing System. It is developed the communication system between the central computer and the cell control computer which is the basic structure of the control architecture of FMS under the concept of DNC (Direct Numerical Control). It is used CYBER 180-830 as the central computer, and GMC-1100 computer as the cell control computer, and the main basic program is developed and tested, thus forming a DNC system which can be used in educational environment.