• 제목/요약/키워드: Product Upgrading

검색결과 46건 처리시간 0.027초

공정플랜트 연료배관의 시스템응력 해석에 의한 구조 건전성 평가 (Structural Integrity Evaluation by System Stress Analysis for Fuel Piping in a Process Plant)

  • 정성용;윤기봉;팜반듀엣;유종민;김지윤
    • 한국안전학회지
    • /
    • 제28권3호
    • /
    • pp.44-50
    • /
    • 2013
  • Process gas piping is one of the most basic components frequently used in the refinery and petrochemical plants. Many kinds of by-product gas have been used as fuel in the process plants. In some plants, natural gas is additionally introduced and mixed with the byproduct gas for upgrading the fuel. In this case, safety or design margin of the changed piping system of the plant should be re-evaluated based on a proper design code such as ASME or API codes since internal pressure, temperature and gas compositions are different from the original plant design conditions. In this study, series of piping stress analysis were conducted for a process piping used for transporting the mixed gas of the by-product gas and the natural gas from a mixing drum to a knock-out drum in a refinery plant. The analysed piping section had been actually installed in a domestic industry and needed safety audit since the design condition was changed. Pipe locations of the maximum system stress and displacement were determined, which can be candidate inspection and safety monitoring points during the upcoming operation period. For studying the effects of outside air temperature to safety the additional stress analysis were conducted for various temperatures in $0{\sim}30^{\circ}C$. Effects of the friction coefficient between the pipe and support were also investigated showing a proper choice if the friction coefficient is important. The maximum system stresses were occurred mainly at elbow, tee and support locations, which shows the thermal load contributes considerably to the system stress rather than the internal pressure or the gravity loads.

라이브 스트리밍 전자 상거래에서 소비자 신뢰에 영향을 미치는 요인에 관한 연구 (Research on factors influencing consumer trust in livestreaming e-commerce)

  • 려효영;심재연
    • 산업진흥연구
    • /
    • 제8권3호
    • /
    • pp.181-199
    • /
    • 2023
  • 전자상거래는 전통적인 그래픽 및 텍스트 형식에서 짧은 동영상 및 라이브스트리밍 형식으로 업그레이드되고 있다. 라이브 전자상거래는 정보전달 및 상품전시의 내용과 형식을 풍부하게 하고 소비자의 쇼핑경험을 향상시키며 점차 새로운 소비패턴이 되고 있다. 그러나 생방송 전자상거래의 발전에는 허위선전, 위조상품, 각종 부정적인 사건 등으로 라이브스트리밍 전자상거래에 대한 소비자의 신뢰도에 심각한 영향을 미치고 있다. 신뢰는 라이브스트리밍 전자상거래의 핵심 경쟁요소이다. 본 논문에서는 신뢰이론에 대한 선행연구를 기반으로 라이브커머스의 "사람, 상품, 장면" 특성 요소를 결합하여 라이브커머스의 신뢰도 모형을 구축하고 가설을 세웠다. 설문조사를 통한 데이터 수집, 라이브커머스의 특성, 쇼호스트 특성, 브랜드 이미지, 제품 정보, 플랫폼 평판, 라이브 상황 및 신뢰성 경향 등의 요인이 소비자 신뢰도에 높은 긍정적인 영향을 미친다는 것을 증명하였다. 연구결과로 매장특성지표를 구축하고, 바람직한 쇼호스트의 특성을 창출하며, 제품브랜드를 구축하고 선택하고, 제품정보를 유지하며, 특성에 적합한 라이브 플랫폼을 선택하고, 라이브 상황에 적절한 컨텐츠를 창출하는 등을 제언하였다.

대장암 항암 화학요법의 처방 오류 평가 및 개선안 제시 (Guideline of Improvement and Evaluation of Prescribing Errors in Colorectal Chemotherapy)

  • 임현수;임성실
    • 한국임상약학회지
    • /
    • 제23권2호
    • /
    • pp.158-166
    • /
    • 2013
  • Background: Colorectal cancer shows a significant increase in South Korea due to westernization of diet, lack of dietary fiber, drinking and smoking, irregular defecation. There are surgery, chemotherapy, radiation therapy in treatment of colorectal cancer. There may be a medication errors in the process of chemotherapy because of its high toxicity, narrow therapeutic index and the health status of cancer patients. Consequently medication errors can cause increasing the risk of death, prolonging hospital stay and increasing the cost. Among medication errors on medication use process, prescribing errors are of particular concern due to higher risk of serious consequences. It is important for pharmacist to prevent the prescribing errors before reaching patient. Therefore we analyzed the prescriptions of colorectal cancer, classified prescribing errors, suggested guideline to reduce prescribing errors and verified the importance of pharmacist's role in prevention of medication errors activity. Methods: We collected the numbers of prescriptions of colorectal cancer(n=2,373) through anti cancer management program and EMR and analyzed the errors of prescriptions by categories from Oct 1st 2011 to Sep 30th 2012 at Chungbuk National University Hospital. We reviewed the prescriptions as follows - patients' characteristics, the result of test, previous prescriptions, characteristics of antineoplastic agents and patients' allergy, drug sensitivity, adverse events. Prescriptions are classified into inpatient and outpatient and analyzed the errors of prescriptions by categories (dosage form, dose, input, diluents, regimen, product). Results: Total prescription number of inpatient and outpatient of colorectal cancer was 1,193 and 1,180 and that of errors was 107(9%) and 22(1.9%), respectively. In case of errors of categories, the number of errors of dosage form is 69 and 8, errors of dose is 15 and 5, errors of input is 9 and 9 in inpatient and outpatient prescriptions, respectively. Errors of diluents is 8, errors of regimen is 3, errors of product is 3 in only inpatient prescriptions. In case of errors of categories by inpatient department, the number of errors of dosage form is 34 and 35, errors of dose is 7 and 8, errors of input is 6 and 3, errors of diluents is 4 and 4, errors of regimen is 2 and 1, errors of product is 2 and 1 in SG and HO, respectively. In case of outpatient department, the number of errors of dosage form is 8 in HO, errors of dose is 5 in HO, errors of input is 5 and 4 in SG and HO, respectively. Conclusions: The rate of errors of inpatient is higher than that of outpatient. Junior doctors are engaged in prescriptions of inpatient and pharmacist need to pay attention to review all prescriptions. If prescribing errors are discovered, pharmacist should contact the prescriber and correct the errors without delay. The guideline to reduce prescribing errors might be upgrading software of anti cancer management program, education for physicians as well as pharmacists and calling prescriber's attention to preventing recurrence of errors.

Study on the response surface optimization of online upgrading of bio-oil with MCM-41 and catalyst durability analysis

  • Liu, Sha;Cai, Yi-xi;Fan, Yong-sheng;Li, Xiao-hua;Wang, Jia-jun
    • Environmental Engineering Research
    • /
    • 제22권1호
    • /
    • pp.19-30
    • /
    • 2017
  • Direct catalysis of vapors from vacuum pyrolysis of biomass was performed on MCM-41 to investigate the effects of operating parameters including catalyzing temperature, catalyzing bed height and system pressure on the organic yields. Optimization of organic phase yield was further conducted by employing response surface methodology. The statistical analysis showed that operating parameters have significant effects on the organic phase yield. The organic phase yield first increases and then decreases as catalyzing temperature and catalyzing bed height increase, and decreases as system pressure increases. The optimal conditions for the maximum organic phase yield were obtained at catalyzing temperature of $502.7^{\circ}C$, catalyzing bed height of 2.74 cm and system pressure of 6.83 kPa, the organic phase yield amounts to 15.84% which is quite close to the predicted value 16.19%. The H/C, O/C molar ratios (dry basis), density, pH value, kinematic viscosity and high heat value of the organic phase obtained at optimal conditions were 1.287, 0.174, $0.98g/cm^3$, 5.12, $5.87mm^2/s$ and 33.08 MJ/kg, respectively. Organic product compositions were examined using gas chromatography/mass spectrometry and the analysis showed that the content of oxygenated aromatics in organic phase had decreased and hydrocarbons had increased, and the hydrocarbons in organic phase were mainly aliphatic hydrocarbons. Besides, thermo-gravimetric analysis of the MCM-41 zeolite was conducted within air atmosphere and the results showed that when the catalyst continuously works over 100 min, the index of physicochemical properties of bio-oil decreases gradually from 1.15 to 0.45, suggesting that the refined bio-oil significantly deteriorates. Meanwhile, the coke deposition of catalyst increases from 4.97% to 14.81%, which suggests that the catalytic activity significantly decreases till the catalyst completely looses its activity.

자동차 부품 누락 방지를 위한 자동 선별 시스템 (Development of a Inspection System for Automotive Part)

  • 신석우;이종훈;박상흡
    • 한국산학기술학회논문지
    • /
    • 제18권10호
    • /
    • pp.756-760
    • /
    • 2017
  • 자동차 부품 업체에서는 납기 준수, 생산 원가 절감, 품질 관리 향상 등의 고객의 필수적인 요구 사항를 만족하기 위하여 자동화를 추진하고 있다. 현재의 수작업을 통한 육안 검사 공정에서는 이러한 필수 요구 사항을 만족하기에는 불가능하다. 따라서 본 연구에서는 품질 관리 개선을 위하여 도어 힌지 브라켓 부품에 대한 현재의 수작업 육안 검사 공정을 대체할 수 있는 자동 선별 시스템을 제안하고자 한다. 본 제안은 도어 힌지 브라켓 부품의 용접너트 누락 불량 발생을 방지하여 고객사의 검사 요구사항 등을 만족할 수 있도록 설계하였다. 검사 공정 알고리즘 및 유사 척도 매칭 알고리즘 프로그램을 자동 선별 시스템에 적용하여 정상 제품과 불량 제품을 구별할 수 있도록 하였다. 검사 공정 알고리즘 및 유사 척도 매칭 알고리즘의 검증 시험을 통하여 검출정확도 98%의 성공적인 검사 결과를 나타내었고 이를 생산 현장에 적용하여 불량 제품감소에 따른 생산성 향상에 기여하였다.

아임계 및 초임계수를 이용한 Athabasca 오일샌드의 추출 (Extraction of Athabasca Oil Sand with Sub- and Supercritical Water)

  • 박정훈;손수환;백일현;남성찬
    • Korean Chemical Engineering Research
    • /
    • 제47권3호
    • /
    • pp.281-286
    • /
    • 2009
  • 아임계 및 초임계 조건의 물을 이용하여 캐나다산 Athabasca 오일샌드로부터 역청 추출 및 황 제거 실험을 수행하였다. 0~120 min의 반응시간, 360, $380^{\circ}C$의 온도, 15~30 MPa의 압력 및 $0.074{\sim}0.61g/cm^3$의 물 밀도를 변화시키면서 micro reactor에서 역청 수율을 조사하였다. 역청 수율은 온도에 상관없이 압력이 증가할수록 증가하였으며, 특히 초임계 영역에서 수증기 개질반응에 의해 생성된 수소에 의해 역청의 수율이 급격히 증가하였다. 전체 기상 생성량은 압력 증가에 따라 감소하였으나 $380^{\circ}C$에서 황과 수소의 생성분율은 25 및 30 MPa로 압력 증가에 따라 소량 증가하였다. 이상의 결과는 초임계 조건이 수소의 생성과 황의 제거에 유리하다는 것을 보여준다. 초임계 조건$380^{\circ}C$, 25와 30 MPa)에서 역청 수율은 최대 약 22%였으며, 오일샌드에 함유된 황 제거율도 최대값 40%에 도달하였다.

Catalytic Gasification of Mandarin Waste Residue using Ni/CeO2-ZrO2

  • Kim, Seong-Soo;Kim, Jeong Wook;Park, Sung Hoon;Jung, Sang-Chul;Jeon, Jong-Ki;Ryu, Changkook;Park, Young-Kwon
    • Bulletin of the Korean Chemical Society
    • /
    • 제34권11호
    • /
    • pp.3387-3390
    • /
    • 2013
  • Catalytic gasification of mandarin waste residue was carried out using direct and indirect catalyst-contact methods for the first time. In the indirect method, non-catalytic reaction in a reactor was followed by catalytic upgrading of vapor product in another reactor. Two different catalysts, $Ni/{\gamma}-Al_2O_3$ and $Ni/CeO_2-ZrO_2$, were employed. $CeO_2-ZrO_2$ support was prepared using hydrothermal synthesis in supercritical water. The catalysts were characterized by $H_2$-temperature programmed reduction and Brunauer-Emmett-Teller analyses. Under the condition of equivalent ratio (ER) = 0, the indirect catalyst-contact method led to a higher gas yield than the direct method. Under ER = 0.2, the yield of biogas obtained over $Ni/CeO_2-ZrO_2$ was higher than that obtained over $Ni/{\gamma}-Al_2O_3$. Also, the coke formation of $Ni/CeO_2-ZrO_2$ was lower than that of $Ni/{\gamma}-Al_2O_3$. Such results were attributed to the higher reducibility and better lattice oxygen mobility of $Ni/CeO_2-ZrO_2$, which were advantageous for partial oxidation reaction.

효과적인 측량 성과물 작성 및 사용자 편의성 강화를 위한 GNSS 현장 측량시스템 개발 (Development of GNSS Field Survey System for Effective Creation of Survey Result and Enhancement of User Convenience)

  • 박준규;김민규
    • 한국측량학회지
    • /
    • 제35권3호
    • /
    • pp.203-210
    • /
    • 2017
  • 우리나라는 국가 위성기준점 망, 가상기준점 서비스 운영 등 실시간 정밀위치결정을 위한 선진화된 인프라를 구축하고, 지속적으로 고도화해 나가고 있다. 하지만 국가적 인프라 활용에 있어 취득된 공간정보를 가공하여 최종 성과물 도출까지는 많은 과정을 거쳐야하며, 이 과정에서 외산 소프트웨어에 대한 의존성이 높은 편이다. 본 연구에서는 GNSS 측위 데이터 및 현장 측량시스템의 요구사항을 분석하여 실시간 정밀위치 결정과 효과적인 성과물 작성이 가능한 GNSS 현장 측량시스템을 개발하고 활용성을 평가하였다. 연구를 통해 사용자 편의성과 활용성을 향상시킨 실시간 GNSS 현장 측량시스템을 개발하였으며, 시스템을 이용하여 효과적으로 현황측량을 수행하고 성과물을 제작할 수 있었다. 또한 기존 측량시스템과 성과를 비교하여 개발된 GNSS 현장 측량시스템의 활용성을 제시하였다. 연구를 통해 개발된 시스템은 실시간 측량에서 성과물의 생성까지 일련의 기능을 모두 수행할 수 있으며, 외산 소프트웨어의 대체로 경제적 부가가치를 창출할 수 있어 측량업무의 효율성 향상에 기여할 것이다.

혁신경영시스템 국제표준 개발 동향 및 도입 방안에 관한 탐색적 연구 (An Exploratory Study on the Trends and Introductions of Innovation Management System International Standards)

  • 박세훈;천동필
    • 품질경영학회지
    • /
    • 제46권4호
    • /
    • pp.761-784
    • /
    • 2018
  • Purpose: The purpose of this study is to introduce the development trend of international standard in the innovative management system and propose the application method of the standard for SME certification system. Methods: This study is based on literature studies and case studies considering the initial stage of development of standards as well as lack of domestic and international research examples. In the literature review, we focused on the characteristics of the innovation management system standards at the national, regional and global level. We examined case studies of Spain and Portugal as case studies. Besides, the evaluation items and certification status of domestic innovative SMEs certification were also searched to find out how to introduce them in Korea. Results: The results of this study can be summarized in three major points. First, new international standards of innovation management are being developed under the ISO management system standard and are currently in the DIS stage. Second, in the case of Spain adopting the national innovation management system standard, it has been reported that the innovation management system standard has a significant effect on the innovation ability and management performance. Third, it was not easy to establish a standardized innovation process between the innovation based on creativity and the standardized based product. The Oslo manual was not enough to provide enough guidance in this area. Conclusion: Companies that want to strengthen their organizational innovation capabilities from a management system point of view and Policymakers that want to plan the upgrading and integrated certification operating system of the domestic innovation SME certification need to consider the ISO 50500 series as a global level standard other than the Oslo manual.

글로벌 가치사슬에서의 부가가치 획득 영향요인 연구: 개발도상국가를 대상으로 (A Research on the Influencing Factors on Value-Added Acquisition in the Global Value Chain in Developing Countries)

  • 구지영
    • 한국경제지리학회지
    • /
    • 제25권2호
    • /
    • pp.203-218
    • /
    • 2022
  • 현대 세계 경제 체제의 주요 특징인 글로벌 가치사슬은 주로 선진국에 의해 주도되어왔고 개발도상국은 상대적으로 저부가가치 활동을 담당함에 따라 가치분배의 지리적 불균형이 발생하였다. 그러나 이러한 가치분배의 불균형은 점차 완화되기 시작하였는데, 이와 같은 변화에 영향을 미치는 요인을 분석하는 것이 본 연구의 목적이다. 연구 목적의 달성을 위하여 다양한 영향요인 중 글로벌 가치사슬에서의 산업 업그레이딩 방식에 초점을 맞춰 개발도상국의 부가가치 획득에 미치는 영향을 분석하였다. OECD 부가가치 기준 교역자료(TiVA)의 전산업, 식료품·담배산업, 섬유·의류 산업, 컴퓨터·전자산업, 자동차산업을 대상으로 패널분석을 실시하였다. 분석결과 전산업의 경우 개발도상국의 부가가치 획득은 총생산량을 증가시키고 고부가가치 제품을 생산하며 전방참여도를 높일수록 증가하는 것을 확인할 수 있었으며, 세부 산업별 분석결과는 산업별 특성에 따라 조금씩 다른 양상으로 나타났다.