• The KIPS Transactions:PartD
• /
• 제13D권2호
• /
• pp.279-286
• /
• 2006

One of the widely used methods for product recommendation in Internet storefronts is matching product features against target customer profiles. When using this method, it's very important to choose a suitable subset of features for recommendation efficiency and performance, which, however, has not been rigorously researched so far. In this paper, we utilize a dataset collected from a virtual shopping experiment in a Korean Internet book shopping mall to compare several popular methods from other disciplines for selecting features for product recommendation: the vector-space model, TFIDF(Term Frequency-Inverse Document Frequency), the mutual information method, and the singular value decomposition(SVD). The application of SVD showed the best performance in the analysis results.

• Proceedings of the KSRS Conference
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.142-145
• /
• 2005

Since the successful launch of FORMOSAT -2 satellite by National Space Organization of Taiwan in May 2004, the Remote Sensing Instrument (RSI) on- board the FORMOSAT -2 has continuously acquired images at one panchromatic and four multi-spectral bands (http://www.nspo.org.tw). In general, the RSI performs well and receives high quality images which proved to be very useful for various applications. However, some RSI panchromatic products exhibit obvious trembling artifact that must be removed. Preliminary study reveals that the trembling artifact is caused by the instability of the spacecraft attitude. Though the magnitude of this artifact is actually less than half of a pixel, it affects the applicability of panchromatic products. A procedure removing this artifact is therefore needed for providing image products of consistent quality. Due to the nature of trembling artifact, it is impossible to describe the trembling amount by employing an analytic model. Relied only on image itself, an algorithm determining trembling amount and removing accordingly the trembling artifact is proposed. The algorithm consists of 3 stages. First, a cross-correlation based scheme is used to measure the relative shift between adjacent scan lines. Follows, the trembling amount is estimated from the measured value. For this purpose, the Fourier transform is utilized to characterize random shifts in frequency domain. An adaptive estimation method is then applied to deduce the approximate trembling amount. In the subsequent stage, image re-sampling operation is applied to restore the trembling-free product. Experimental results show that by applying the proposed algorithm, the unpleasant trembling artifact is no longer evident.

• Journal of the Korean earth science society
• /
• 제32권3호
• /
• pp.249-264
• /
• 2011

A multi-Gaussian kriging approach extended to space-time domain is presented for uncertainty modeling as well as time-series mapping of environmental variables. Within a multi-Gaussian framework, normal score transformed environmental variables are first decomposed into deterministic trend and stochastic residual components. After local temporal trend models are constructed, the parameters of the models are estimated and interpolated in space. Space-time correlation structures of stationary residual components are quantified using a product-sum space-time variogram model. The ccdf is modeled at all grid locations using this space-time variogram model and space-time kriging. Finally, e-type estimates and conditional variances are computed from the ccdf models for spatial mapping and uncertainty analysis, respectively. The proposed approach is illustrated through a case of time-series Particulate Matter 10 ($PM_{10}$) concentration mapping in Incheon Metropolitan city using monthly $PM_{10}$ concentrations at 13 stations for 3 years. It is shown that the proposed approach would generate reliable time-series $PM_{10}$ concentration maps with less mean bias and better prediction capability, compared to conventional spatial-only ordinary kriging. It is also demonstrated that the conditional variances and the probability exceeding a certain thresholding value would be useful information sources for interpretation.

• Journal of the Korean association of regional geographers
• /
• 제17권4호
• /
• pp.432-442
• /
• 2011

Climatic variables such as temperature and precipitation tend to vary both in space and in time simultaneously. Thus, it is necessary to include space-time autocorrelation into conventional spatial interpolation methods for reliable time-series mapping. This paper introduces and applies space-time variogram modeling and space-time kriging to generate time-series temperature maps using hourly Automatic Weather System(AWS) temperature observation data for a one-month period. First, temperature observation data are decomposed into deterministic trend and stochastic residual components. For trend component modeling, elevation data which have reasonable correlation with temperature are used as secondary information to generate trend component with topographic effects. Then, space-time variograms of residual components are estimated and modelled by using a product-sum space-time variogram model to account for not only autocorrelation both in space and in time, but also their interactions. From a case study, space-time kriging outperforms both conventional space only ordinary kriging and regression-kriging, which indicates the importance of using space-time autocorrelation information as well as elevation data. It is expected that space-time kriging would be a useful tool when a space-poor but time-rich dataset is analyzed.

• The Journal of Korea Robotics Society
• /
• 제4권2호
• /
• pp.81-87
• /
• 2009

As expanding of service robots into the human life, the needs of robots are increased. The experts group forecasted that the robot market would grow rapidly in a short time, robot companies should compete with others for prior occupation in a market. In this research, we proposed a framework of robot identity design based on building methods of product identity and developed a case study. Identity is one of the strategies to distinguish from competitors through managing image united. It is possible to apply this identity approach on robot area, which was used for making image of companies, brands, and products. In general, identity has visual, invisual features, which can be classified into three elements; Robot Philosophy, Functional Affordance, Family Look. Robot philosophy means the vision or philosophy of a company through robot development, functional affordance is a character or role to serve and family look includes visual design elements like as shape, color, material, graphic, behavior etc. We suggest that this guide will be applied to build identity of following series of a model, models of same service group and all models of a company or commercial space.

• Proceedings of the Korea Database Society Conference
• /
• 한국데이타베이스학회 1999년도 춘계공동학술대회: 지식경영과 지식공학
• /
• pp.253-260
• /
• 1999

The recycling cell formation problem means that disposal products me classified into recycling part families using group technology in their end of life phase. Disposal products have the uncertainties of product status by usage influences during product use phase and recycling cells are formed design, process and usage attributes. In order to treat the uncertainties, fuzzy set theory and fuzzy logic-based neural network model are applied to recycling cell formation problem far disposal products. In this paper, a heuristic approach fuzzy ART neural network is suggested. The modified fuzzy ART neural network is shown that it has a great efficiency and give an extension for systematically generating alternative solutions in the recycling cell formation problem. We present the results of this approach applied to disposal refrigerators and the comparison of performances between other algorithms. This paper introduced a procedure which integrates economic and environmental factors into the disassembly of disposal products for recycling in recycling cells. A qualitative method of disassembly analysis is developed and its ai is to improve the efficiency of the disassembly and to generated an optimal disassembly which maximize profits and minimize environmental impact. Three criteria established to reduce the search space and facilitate recycling opportunities.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 한국지능정보시스템학회 1999년도 춘계공동학술대회-지식경영과 지식공학
• /
• pp.253-260
• /
• 1999

The recycling cell formation problem means that disposal products are classified into recycling part families using group technology in their end of life phase. Disposal products have the uncertainties of product status by usage influences during product use phase and recycling cells are formed design, process and usage attributes. In order to treat the uncertainties, fuzzy set theory and fuzzy logic-based neural network model are applied to recycling cell formation problem for disposal products. In this paper, a heuristic approach for fuzzy ART neural network is suggested. The modified Fuzzy ART neural network is shown that it has a great efficiency and give an extension for systematically generating alternative solutions in the recycling cell formation problem. We present the results of this approach applied to disposal refrigerators and the comparison of performances between other algorithms. This paper introduced a procedure which integrates economic and environmental factors into the disassembly of disposal products for recycling in recycling cells. A qualitative method of disassembly analysis is developed and its aim is to improve the efficiency of the disassembly and to generated an optimal disassembly which maximize profits and minimize environmental impact. Three criteria established to reduce the search space and facilitate recycling opportunities.

• The Korean Journal of Applied Statistics
• /
• 제34권1호
• /
• pp.9-23
• /
• 2021

In the following paper we introduce a variational Bayes method that approximates posterior distributions with mean-field method. In particular, we introduce automatic differentiation variation inference (ADVI), which approximates joint posterior distributions using the product of Gaussian distributions after transforming parameters into real coordinate space, and then apply it to pharmacokinetic models that are models for the study of the time course of drug absorption, distribution, metabolism and excretion. We analyze real data sets using ADVI and compare the results with those based on Markov chain Monte Carlo. We implement the algorithms using Stan.

• Journal of applied mathematics & informatics
• /
• 제19권1_2호
• /
• pp.397-414
• /
• 2005

In the existing literature, most of the purchasing models were developed only for retailers problem ignoring the constraint of storage capacity of retailers shop/showroom. In this paper, we have developed a deterministic model of wholesaler-retailers' problem of single product. The storage capacity of wholesaler's warehouse/showroom and retailers' showroom/shop are assumed to be finite. The items are transported from wholesaler's warehouse to retailers' Own Warehouse (OW) in a lot. The customer's demand is assumed to be displayed inventory level dependent. Demands are met from OW and that spaces of OW will immediately be filled by shifting the same amount from the Rented Warehouse (RW) till the RW is empty. The time duration between selling from OW and filling up its space by new ones from RW is negligible. According to relative size of the retailers' existing (own) warehouse capacity and the demand factors, different scenarios are identified. Our objectives are to optimize the cost functions of wholesaler and two retailers separately. To solve this problem, a real coded Genetic Algorithm (GA) with roulette wheel selection/reproduction, whole arithmetic crossover and non-uniform mutation is developed. Finally a numerical example is presented to illustrate the results for different scenarios. To compare the results of GA, Generalised Reduced Gradient Method has been used for the problem. Also, a sensitivity analysis has been performed to study the variations of the optimal average cost with respect to the different parameters.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 한국소성가공학회 1997년도 고액공존금속의 성형기술 심포지엄
• /
• pp.5-15
• /
• 1997

It is the objective of this study that by conducting the serni-solid extrusion using A12024, the effect of various process variables on the quality of extruded product and extrusion force is understood. The results of experiment are compared with those of finite element simulation in order to verify the effectiveness of the developed FE-simulation code. In order to simulate densification in the deformation of serni-solid material, the semi-solid material is assumed to be composed of solid region as porous skeleton following compressible visco-plastic model and liquid region following Darcy's equation for the liquid flow saturated in the interstitial space. Then the flow and deformation of the semi-solid alloy are analyzed by coupling the deformation of the porous skeleton and the flow of the eutectic liquid. It is assumed that initial solid fraction is homogeneous. Yield and plastic potential function presented by Kuhn and constitutive model developed by Gunasekera are used for solid skeleton.