• Journal of the Korean Wood Science and Technology
• /
• v.32 no.2
• /
• pp.90-95
• /
• 2004

Pitch pine (Pinus rigida) has been planted in Korean forests for several decades, primarily for erosion control and use as a fuel supply. To enhance its value, and especially potential use as lamina for structural glued laminated timber (glulam), log quality and lumber yield of pitch pine were evaluated in this study. Trees from pure pitch pine stands with an average diameter at breast height of 32 cm were felled and bucked into 3.6m long 15 cm minimum butt-end diameter logs. Over 80% of the logs were classified to No.2 or No.3 visual grade group. Upon sawing total lumber yield was 55.2%, 39.9% for structural glulam lamina, 7.2% for louver, and 8.1% for miscellaneous use. The final lumber yield for manufacturing structural glulam, after cross-cutting to eliminate knots and finger jointing, was only 15.3%. To enhance this manufacturing yield requires that the rate of knot-included lumber used as lamina be raised. However arrangement of the knot-included lamina, whose mechanical properties need to be accurately evaluated, must be optimized to minimize any reduction to the structural glulam strength. The log quality and lumber yield of pitch pine evaluated in this study are expected to facilitate proper planning for wood product manufacture in the Korean lumbering and glulam industrial field, which has not previously dealt with this species.

• Journal of Food Hygiene and Safety
• /
• v.37 no.1
• /
• pp.9-14
• /
• 2022

The purpose of this study was to analyze the hazard of fungi in Garaetteok (Korean rice cake) by isolating and identifying of fungi contaminated with Garaetteok and investigating the possibility of mycotoxin production. Garaetteok used in this study were the ones that were returned back to the manufacturers in Jeollanam-do due to the presence of foreign matters presumed to be fungi. The fungi foreign matter was collected and inoculated on Potato dextrose agar, Malt extract agar, and Czapek yeast extract agar, and then cultured at 25℃ for 7 days. The micro-structure was observed under an optical microscope for the colonies in which pure isolation was confirmed. The gene sequencing of the product of amplified PCR was analyzed using the ITS primer. Colony-1 and 2 maintained the same properties in each tray, confirming that they were purely isolated. Budding cells were observed from the Colony-1, thus, it was determined to be yeast. Colony-2 was determined to be a fungus that belongs to Fusarium spp. as fusiform conidia were observed. As a result of gene sequencing, a total of 76 cases of fungi of Fusarium spp. were found, among which Fusarium solani was the most observed cases (53 cases). From the morphological and genetic identification, Colony-2 was identified as Fusarium spp., specifically, Fusarium solani. The fungi found in Fusarium spp. produce mycotoxins such as nivalenol, zearalenone, and fumonisin, which may cause vomiting, diarrhea, and cancer. Conclusively, the results confirm the possibility of mycotoxin production by Fusarium spp. isolated from Garaetteok. Consequently, when an unknown fungus was found, it is necessary to isolate and identify the fungus, determine whether it is a mycotoxin producing species, and strengthen relative administrative measures, accordingly.

• Advances in nano research
• /
• v.12 no.6
• /
• pp.605-616
• /
• 2022

We prepared two samples of ultrafine ferrihydrite (FH) nanoparticle ensembles of quite a different origin. First is the biosynthesized sample (as a product of the vital activity of bacteria Klebsiella oxytoca (hereinafter marked as FH-bact) with a natural organic coating and negligible magnetic interparticle interactions. And the second one is the chemically synthesized ferrihydrite (hereinafter FH-chem) without any coating and high level of the interparticle interactions. The interparticle magnetic interactions have been tuned by modifying the nanoparticle surface in both samples. The coating of the FH-bact sample has been partially removed by annealing at 150℃ for 24 h (hereinafter FH-annealed). The FH-chem sample, vice versa, has been coated (1.0 g) with biocompatible polysaccharide (arabinogalactan) in an ultrasonic bath for 10 min (hereinafter FH-coated). The changes in the surface properties of nanoparticles have been controlled by XPS. According to the electron microscopy data, the modification of the nanoparticle surface does not drastically change the particle shape and size. A change in the average nanoparticle size in sample FH-annealed to 3.3 nm relative to the value in the other samples (2.6 nm) has only been observed. The estimated particle coating thickness is about 0.2-0.3 nm for samples FH-bact and FH-coated and 0.1 nm for sample FH-annealed. Mössbauer and magnetization measurements are definitely shown that the drastic change in the blocking temperature is caused by the interparticle interactions. The experimental temperature dependences of the hyperfine field hf>(T) for samples FH-bact and FH-coated have not revealed the effect of interparticle interactions. Otherwise, the interparticle interaction energy E_int estimated from the hf>(T) for samples FH-chem and FH-annealed has been found to be 121k_B and 259k_B, respectively.

• Applied Chemistry for Engineering
• /
• v.33 no.2
• /
• pp.179-187
• /
• 2022

In this study, the synthesis of 1,2-dodecylaminopropanediol (1,2-DDAP) having a 12 carbon chain length and an amine group was designed to improve the preservation and hydrophilicity of 1,2-alkanediol-based compounds. 1,2-DDAP was prepared by reacting dodecylamine (DDA) with 3-monochloro-1,2-propanediol (3-MCPD) in an ethanol solvent at 40 ℃, and its yield and purity were about 56% and 98%, respectively, under a reaction condition of 2 h and a DDA:3-MCPD molar ratio of 1:0.8. The antimicrobial effect of 1,2-DDAP showed the values of the minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) against microorganisms at concentrations of 10 to 100 times lower than those of 1,2-octanediol(1,2-ODIOL) or 1,2-decanediol (1,2-DDIOL). Based on the hydrophilic properties of 1,2-DDAP, mixed preservatives were prepared by adding small amounts of 1,2-ODIOL or 1,2-DDIOL, which are poorly soluble in water, with 1,2-DDAP. Mixed preservatives exhibited an effect of inhibiting microorganisms equal to or greater than that of 1,2-DDAP alone in antimicrobial activity tests. As a result of confirming the preservation effect in lotion (cosmetic formulation) for application, 1,2-DDAP showed similar antimicrobial activity at concentrations of 0.3 to 0.6 times lower than that of 1,2-ODIOL or 1,2-DDIOL. Therefore, it is considered that the use of 1,2-DDAP alone and the mixed use with small amounts of 1,2-ODIOL or 1,2-DDIOL can be a good alternative to preservatives in the product.

• Membrane Journal
• /
• v.32 no.4
• /
• pp.218-226
• /
• 2022

Hydrogen, a carrier of large-capacity chemical and clean energy, is an important industrial gas widely used in the petrochemical industry and fuel cells. In particular, hydrogen is mainly produced from fossil fuels through steam reforming and gasification, and carbon dioxide is generated as a by-product. Therefore, in order to obtain high-purity hydrogen, carbon dioxide should be removed. This review focused on free-standing polymeric membranes and mixed-matrix membranes (MMMs) that separate hydrogen from carbon dioxide reported in units of Barrer [1 Barrer = 10^-10 cm³ (STP) × cm / (cm² × s × cmHg)]. By analyzing various recently reported papers, the structure, morphology, interaction, and preparation method of the membranes are discussed, and the structure-property relationship is understood to help find better membrane materials in the future. Robeson's upper bound limits for hydrogen/carbon dioxide separation were presented through reviewing the performance and characteristics of various separation membranes, and various MMMs that improve separation properties using technologies such as crosslinking, blending and heat treatment were discussed.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1263-1263
• /
• 2001

The amounts of organic matter present in soil and the rate of soil organic matter (SOM) turnover are influenced by agricultural management practice, such as rotation, tillage, forage plow down direct seeding and manure application. The amount of nutrients released from SOM is highly dependent upon the state of the organic matter. If it contains a large proportion of light fractions (low-density) more nutrients will be available to the glowing crops. However, if it contains mostly heavy fractions (high-density) that are difficult to breakdown, then lesser amounts of nutrients will be available. The state of the SOM and subsequent release of nutrients into the soil can be predicted by NIRS as long as a robust regression equation is developed. The NIRS method is known for its rapidity, convenience, simplicity, accuracy and ability to analyze many constituents at the same time. Our hypothesis is that the NIRS technique allows researchers to investigate fully and in more detail each field for the status of SOM, available moisture and other soil properties in Alberta soils for precision farming in the near future. One hundred thirty one (131) Alberta soils with various levels (low 2-6%, medium 6-10%, and high >10%) of organic matter content and most of dry land soils, including some irrigated soils from Southern Alberta, under various management practices were collected throughout Northern, Central and Southern Alberta. Two depths (0- 15 cm and 15-30 cm) of soils from Northern Alberta were also collected. These air-dried soil samples were ground through 2 mm sieve and scanned using Foss NIR System 6500 with transport module and natural product cell. With particle size above 150 microns only, the “Ludox” method (Meijboom, Hassink and van Noorwijk, Soil Biol. Biochem.27: 1109-1111, 1995) which uses stable silica, was used to fractionate SOM into light, medium and heavy fractions with densities of <1.13, 1.13-1.37 and >1.37 respectively, The SOM fraction with the particle size below 150 microns was discarded because practically, this fraction with very fine particles can't be further separated by wet sieving based on density. Total organic matter content, mechanical texture, ash after 375$^{\circ}C$, and dry matter (DM) were also determined by “standard” soil analysis methods. The NIRS regression equations were developed using Infra-Soft-International (ISI) software, version 3.11.

• Journal of Plant Biotechnology
• /
• v.49 no.4
• /
• pp.356-361
• /
• 2022

Bacillus sp. is a useful strain for agriculture because it promotes plant growth and controls plant pathogens through a variety of mechanisms. In this study, we obtained a microbial preparation with a high number of viable cells by culturing newly isolated soil bacteria on an optimized medium. Subsequently, we applied this preparation to lettuce to enhance its growth and yield. First, B. amyloliquefaciens ISP-5 was isolated from soil. Next, optimization of culture medium was carried out using 5 L scale fermenters. When culturing B. amyloliquefaciens ISP-5 on this optimized medium, the number of viable cells was approximately 1000 times higher than that obtained from culturing on the commercial medium. Afterwards, the plant growth promotion properties of the ISP-5 strain were evaluated using lettuce as a test plant. Foliar spray treatment of lettuce was carried out by inoculating half the standard concentration suspension (0.5 × 10⁷ cfu/ml). As a result, leaf width increased by 8.6% and leaf length increased by 12.9% compared to the control group. Live weight also increased by 24.2% and dry weight by 23.9%. Considering the results from field test, B. amyloliquefaciens ISP-5 showed potential as a plant growth-promoting bacteria.

• Clean Technology
• /
• v.29 no.3
• /
• pp.185-192
• /
• 2023

This study was conducted to obtain basic process simulation data before conducting pyrolysis experiments for the development of a thermochemical conversion system by recirculation of heat carrier and gases thereby. In this study, polypropylene (PP) was used as a pyrolysis sample material as an alternative to waste plastics, and fluid sand was used as a heat transfer medium in the system. Manganese (Mn) was chosen as the catalyst for the pyrolysis experiment, and the catalyst pyrolysis was performed by impregnating it in the sand. The basic properties of PP were analyzed using a thermogravimetric analyzer (TGA), and liquid oil was generated through catalytic pyrolysis under a nitrogen atmosphere at 600℃. The carbon number distribution of the generated liquid oil was confirmed by GC/MS analysis. In this study, the effects of the presence and the amount of Mn loading on the yield of liquid oil and the distribution of hydrocarbons in the oil were investigated. When Mn/sand was used, the residue decreased and the oil yield increased compared to pyrolysis using sand alone. In addition, as the Mn loading increased, the ratio of C₆~C₉ range gasoline in the liquid oil gradually increased, and the distribution of diesel and heavy oil with more carbon atoms than C₁₀ in the oil decreased. In conclusion, it was found that using Mn as a catalyst and changing the amount of Mn could increase the yield of liquid oil and increase the gasoline ratio in the product.

• Proceedings of the SCSK Conference
• /
• 2003.09b
• /
• pp.26-31
• /
• 2003

Korean Ginseng is a medicinal herb which grows naturally in korea. an ancient country situated in north-eastern Asia. Its medical use was already well known to herb doctors in this region about five thousand years ago since the effectiveness of korean ginseng has been recognized through practical use for a long time. Korean Ginseng has always been regarded as a devine cure. The name "Ginseng" can be found in various medicinal books. many of which were written as early as B.C. 100. In the records of many chinese medical books. dating from the inception of publishing, it was noted that Korean Ginseng was of the highest level of quality. Korean Ginseng originally grew in the mountains of korea. However, this wild Korean Ginseng(js called SANSAM) could not meet the ever-increasing demands. and from the 16th century. it has been cultivated on farms for mass processing and supplying in korea(js called INSAM). It was already recognized in korea a long time ago(B.C. 57 - A.D. 668) that Korean Ginseng possessed the qualities of panacea, tonic and rejuvenator, and had other medicinal properties as well. The effectiveness of Korean Ginseng is widely recognized among south-eastern Asians as well as Chinese. As its effect has been proved scientifically. Korean Ginseng is now becoming the ginseng for all human beings in the world. Korean ginseng is differently called according to processing method. Dried thing is Insam(white ginseng), boiled or steamed is Hongsam(red ginseng). 장뇌삼(long headed ginseng) is artificially grown in the mountain no in field for a long time. So the body is thin and some long. but ingredients are concentrated. Korean wild ginseng(SANSAM) is rare in these days but we developed cosmetic ingredient. The scientific name of Korean Ginseng is Panax Ginseng. It has acknowledge as a natural mysterious cure among the notheastern peoples. because of its broad medicinal application. The origin of the word" Panax" derived from panacea. a Greek word meaning cure-all. According to the classification method of herb medicines in the Chinese medicinal book. "God-Farmer Materia Medica(A.D. 483-496) korean Ginseng was described as the superlative drug: panacea. tonic and rejuvenator. We studied skin immunological effect. collagen synthesis. cell growth and whitening effect of SANSAM extract. IN cosmetics.. SANSAM extract had skin fibroblast cell growth effect. recover damaged skin in the sun and protect fine wrinkle. Also. In hair product.. inhibits hairless, white hair.its hairless, white hair.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.1
• /
• pp.9-15
• /
• 2023

The cement is a typical CO₂ emission industry. Manufacturing process improvements and increased use of alternative materials are needed to reduce energy consumption and CO₂ emissions. This study confirmed the basic characteristics of cement hydration by sintering CAF at low temperature as a CO₂ adsorbent material. For the hydration product of the synthetic CAF, crystal phase analysis, porosity, and structural images were confirmed, and the compressive strength was measured. The replacement rate of SCAF was 10, 20, and 100 %, and the compressive strength tended to decrease as the replacement rate increased. In addition, when the SCAF substitution rate is 100 %, the hydration products of the early age are calcium aluminum oxide hydrate (Ca₃Al₂O₆ x H₂O) and calcium iron hydroxide (Ca₃Fe(OH)₁₂), and at substitution rates of 10 and 20 %, CAF compounds other than general cement hydrates brownmillerite was observed. As for the porosity, the pore size increased and the porosity increased with the increase of the replacement ratio. As a result of this study, CAF manufactured by low-temperature sintering seems to be difficult to use alone and general curing for utilization as a CO₂ adsorbing material.