• Herbal Formula Science
• /
• v.19 no.1
• /
• pp.207-217
• /
• 2011

Objectives : In a previous study, we have shown that Gagam-Gongjin-Dan(GGD) has an inhibitory effect on the ovalbumin-induced immune responses and a hepatoprotective effect on actaminophen-induced liver injury in Balb/c Mice. However, the possible anti-inflammatory effect of GGD extract for inflammatory mediators was not reported. Therefore, the purpose of this study was to investigate an inhibitory effects of GGD extract against lipopolysaccharides(LPS) induced inflammatory mediators in mouse peritoneal macrophages. Methods : GGD extract was prepared by extracting with methanol for 7 days. The extract was freeze-dried following filtration through vacuum distillation system. Accumulated nitrite, an oxidative product of nitric oxide(NO), was measured in the culture medium by the Griess reaction. The levels of prostaglandin $E_2(PGE_2)$, interleukin-$1{\beta}$(IL-$1{\beta}$), tumor necrosis factor-${\alpha}$(TNF-${\alpha}$) were measured by enzyme-linked immunosorbent assay. The expressions of inducible nitric oxide synthase (iNOS) and cyclooxygenase-2(COX-2) were measured by Western blot analysis. Results : GGD extract (50-$400\;{\mu}g$/ml) per se had no cytotoxic effect in LPS-stimulated peritoneal macrophages. GGD extract dose-dependently reduced NO, $PGE_2$, IL-$1{\beta}$ and TNF-${\alpha}$ production and COX-2 activity caused by stimulation of LPS. The levels of iNOS and COX-2 protein expressions were markedly suppressed by the treatment with GGD extract in a dose dependent manner. Conclusions : These results suggest that GGD extract has an anti-inflammatory effect against LPS-induced inflammatory mediators in peritoneal macrophages, these properties may contribute to inflammation disease care.

• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.1
• /
• pp.1-14
• /
• 2005

Statement of problem. Among the physical properties of adhesion luting cement, the aspect that requires the most important factor is the degree of solubility and water sorption. Dissolution or an inadequate due to excessive water sorption inside the oral cavity compromises the while concurrently increasing the susceptibility to secondary dental caries. Susceptibility to dissolution and difficulty of removing remnant cement from the gingival sulcus have hindered the use of dental resin cement in the clinical practice, but the improved characteristics of newer generation resin cements have interest in and enabled resin cements to be widely used in adhesion of fixed prosthesis, such as laminate veneers and all-ceramic crowns. Purpose. The purpose of this study is to compare and analyze the degrees of solubility and water sorption of a variety of resin cements widely used for clinical purposes with different curing methods. Material and methods. Self-curing resin cements, $Avanto^{(R)}$, $C&B^{TM}$ CEMENT and Superbond C&B cements comprised group 1, 2 and 3. The dual-curing resin cements $Panavian^{TM}$ F, $Calibra^{(R)}$ and $Variolink^{(R)}$ II were divided into groups 4, 5, and 6, respectively. The investigation was carried out using disc-shaped specimens as specified by ANSI/ADA Specification No. 27. The degree of water sorption, water solubility and lactic acid solubility of each test group was analyzed statistically leading to the following conclusion. Results. The degree of water sorption was shown to increase in the following order : group 6, 5, 4, 2, 1 and 3. There were significant differences between the water sorption of each group. Results of the degree of water solubility were shown to increase in the following order : group 6, 5, 4, 2, 1 and 3. Statistically significant differences were found between each group, with the exception of groups 1 and 3. Finally, the degree of lactic acid solubility was found to increase in the following order : group 6,5,4,2,3 and 1. Significant differences were found between each group. In general dual-curing resin cements displayed substantially lower values than self-curing resin cements with regard to water sorption, water solubility, and lactic acid solubility. Conclusions. From the results of this study, dual-curing resin cements show a significantly lower degree of water sorption and solubility than their self-curing counterparts. Clinically, when selecting resin cements, the product with a lower degree of water sorption and solubility are preferred. The results of this study indicate that the use-of dual-curing resin cements is preferable to self-curing cements.

• Culinary science and hospitality research
• /
• v.22 no.5
• /
• pp.95-105
• /
• 2016

The purpose of this study is to identify the possibility of developing new jelly product with healthy function by the physio-chemical analysis and sensory test of jelly sample groups adding each 20~80% of squeezed Indian spinach liquid. Sugar contents of squeezed Indian spinach liquid was $3.4^{\circ}Brix$. From chromatography, L-value has been decreased by increasing the adding rate of squeezed Indian spinach liquid, and both a-value (redness) and b-value (yellowness) have shown similar trend. According to the measuring result of squeezed Indian spinach liquid the DPPH radical scavenging activity was 15.67 mg/mL, and its total polyphenol contents was 7.00 mg/g. By increasing squeezed Indian spinach liquid, the DPPH radical scavenging activity and total polyphenol contents have shown increasing tendency. Among textures of squeezed Indian spinach liquid, for hardness, sample group of 20% adding was the highest by 4.27%, and for adhesiveness the sample group of 20% adding was the highest by 2.48%, and the lowest was sample group of 80% adding with 0.91%. From the result of sensory test the sample group adding 40% of squeezed Indian spinach liquid has been appraised the most highly in color, scent, sweet taste, chewiness, moistness, and general preference. According to the above results, it is understood that the 40% adding rate of squeezed Indian spinach liquid, when producing jelly, would be the most compatible rate of adding.

• Korean Chemical Engineering Research
• /
• v.40 no.6
• /
• pp.752-756
• /
• 2002

Green-emitting $Zn_2SiO_4:Mn$ phosphors for PDP(Plasma Display Panel) application were synthesized by colloidal seed-assisted spray pyrolysis process. The codoping with $Gd^{3+}/Li^+$, which replaces $Si^{4+}$ site in the willemite structure, was performed to improve the luminous properties of the $Zn_2SiO_4:Mn$ phosphors. The particles prepared by spray pyrolysis process using fumed silica colloidal solution had a spherical shape, small particle size, narrow size distribution, and non-aggregation characteristics. The $Gd^{3+}/Li^+$ codoping amount affected the luminous characteristics of $Zn_2SiO_4:Mn$ phosphors. The codoping with proper amounts of $Gd^{3+}/Li^+$ improved both the photoluminescence efficiency and decay time of $Zn_2SiO_4:Mn$ phosphor particles. In spray pyrolysis, the post-treatment temperature is another factor controlling the luminous performance of $Zn_2SiO_4:Mn$ phosphors. The $Zn_{1.9}SiO_4:Mn_{0.1}$ phosphor particles containing 0.1 mol% $Gd^{3+}/Li^+$ co-dopant had a 5% higher PL intensity than the commercial product and 5.7 ms decay time after post-treatment at $1,145^{\circ}C$.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.41 no.3
• /
• pp.209-218
• /
• 2015

Once powder base makeup products are applied to the skin, the products are formed a film and attached on the skin for 8 to 12 hours. The makeup film is deformed by secretions such as sweat and sebum secreted from the skin. Thus, durability of the film is an important quality factor in the makeup and its evaluation is also important. In this study, characteristics of the semi-finished powder products such as water absorption, oil absorption, water repellent and oil repellent were evaluated in a number of ways. Also, simple methods, which are not affected by evaluation conditions such as a difference between sweat and sebum secretion, temperature and humidity, were examined to predict the durability of the products. We measured water absorption, oil absorption, water repellent and oil-repellent properties of semifinished product by tablet, capillary and dipping method and then compared with the data of color difference meter and ROBO skin analyzer. Results showed that the durability of powder base makeup products was associated with more oil absorption and water-repellent characteristics than water absorption and oil-repellent. Oil absorption characteristics by tablet and capillary method and water-repellent characteristics by dipping method provides a simple and quick method to precdict the durability of the makeup products.

• Korean Journal of Food Science and Technology
• /
• v.28 no.6
• /
• pp.1126-1134
• /
• 1996

The physical characteristics changes of carrots during drying were studied to minimize the quality degradation by applying improved drying process and pretreatment method. Physico-chemical properties of the product were analyzed, and then, drying mechanisms were explained by diffusion coefficients and drying models. In hot air drying process, the drying and rehydration efficiencies were high at low relative humidity and high temperature. Browning degree and specific volume also showed similar trend to drying efficiency. Diffusion coefficient, which describes moisture transfer, was also high at low relative humidity and at high temperature. It was verified using. Arrhenius equation that drying process was influenced by temperature. It was also observed during experiment that temperature changes were more effective in drying than relative humidity changes. Quadratic model was the most fittable in explaining the process. As a result of analyzing the experimental data with respect to the drying time, the contents of carotene and moisture could be modeled as a polynomial. As the air velocity increased, drying performance and rehydration efficiency increased.

• Journal of the Mineralogical Society of Korea
• /
• v.26 no.2
• /
• pp.87-99
• /
• 2013

The occurrence, mineralogical characteristics, and origin of the dolomite ores were investigated from major dolomite mines in South Korea. Mineralogical and textural properties of the ores and associated minerals were analyzed using X-ray diffraction, thin section petrography, and scanning electron microscopy. Dolomite ores were light to dark gray in color and mainly composed of dolomite in varying particle size with minor amounts of calcite, quartz and micas. Calcite, quartz, illite, feldspar, kaolin minerals, and chlorite occurred in local veins, dikes and alteration zones. Sepiolite and wollastonite occurred in the altered part of some mine. Asbestos minerals such as chrysotile and tremolite, however, were not identified in the present study. Reddish brown to yellow clay materials were mainly composed of illite, occasionally associated with kaolin minerals and smectite. These clay minerals might be a product of the local hydrothermal alteration related to the dyke intrusion and subsequent weathering. As well indicated in the previous studies, mineral composition, texture, and occurrence of the dolostone beds suggest their formation through the diagenesis of carbonate sediments deposited in the shallow sea during the Precambrian to Paleozoic period.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.12 no.1
• /
• pp.7-17
• /
• 2014

Molten salt electrorefining process achieves uranium deposits at cathode using an electrochemical processing of spent nuclear fuel. In order to recover pure uranium from cathode deposit containing about 30wt% salt, the adhered salt should be removed by cathode process (CP). The CP has been regarded as one of the bottle-neck of the pyroprocess as the large amount of uranium is treated in this step and the operation parameters are crucial to determine the final purity of the product. Currently, related research activities are mainly based on experiments consequently it is hard to observe processing variables such as temperature, pressure and salt gas behavior during the operation of the cathode process. Hence, in this study operation procedure of cathode process is numerically described by using appropriate mathematical model. The key parameters of this research are the amount of evaporation at the distillation part, diffusion coefficient of gas phase salt in cathode processor and phase change rate at condensation part. Each of these conditions were composed by Hertz-Langmuir equation, Chapman-Enskog theory, and interphase mass flow application in ANSYS-CFX. And physical properties of salt were taken from the data base in HSC Chemistry. In this study, calculation results on the salt gas behavior and optimal operating condition are discussed. The numerical analysis results could be used to closely understand the physical phenomenon during CP and for further scale up to commercial level.

• Cartoon and Animation Studies
• /
• s.46
• /
• pp.207-231
• /
• 2017

Printmaking is a field of fine arts and is placed on a vague boundary that is perceived as a commercial product with a popular character due to the speciality of editions. Advances of modern science and technology has developed a new technique of printmaking, and the fusion of printmaking and computer has shown the possibility of reproduction art. Reproduction printmaking has been heavily influenced by photography and extended areas, and the various forms of printing have brought about many changes and attempts by stimulating the possibilities of indirect art at various angles. As the history of printmaking and technology closely relate, the development of computer makes widespread expansion of plural artistry, technological and artistic change. A new conceptual shape can be created on the copied image simply by placing the material of the print on the smoothly flat surface expressed in digital form. The process and the result of such work show the area of unique work which is different from the value of the $\grave{a}$ la carte art or the characteristics of the material given by the print. The deprecated perception of reproducibility evaluated the value of the work in a direct sense of printmaking. It is undeniable that it is devalued by a bundle of works regardless of the value of each edition. However, the physical properties of the prints on the paper are brought up with hand drawings drawn on the canvas by hand. And it becomes an opportunity to show new aspect and change through the process of combining digital print information on paper. The diversity of media is sometimes a controversy of identity between art and technology. In the future, it should be discussed how the limit of the media which can be enjoyed in the field of art can be set as a standard.

• Korean Journal of Food Science and Technology
• /
• v.28 no.2
• /
• pp.371-377
• /
• 1996

Potential health promoting effects such as antiallergic, anti-inflammatory, antiviral, anticancer and anticarcinogenic properties have been ascribed to citrus flavonoids. Dietary fibers have also been used as functional food components due to the various beneficial physiological activities. Two kinds of flavonoids, naringin and hesperidin, were identified both in the pulp and in the peel of Korean tangerine. The contents of naringin and hesperidin in the pulp were 2.95 mg/100 g and 0.53 mg/100 g, respectively. However, the contents of naringin and hesperidin in the peel were much higher (10.77 mg/100 g and 38.90 mg/100 g) thanthose of two identified flavonoids in the pulp. The content of soluble dietary fiber (SDF) in the pulp of tangerine was 1.90%, insoluble dietary fiber (IDF) 0.37%, and total dietary fiber (TDF) 2.27% based on wet matter, respectively. The content of SDF was 1.09%, IDF 4.77% and TDF 1.86% in the peel of tangerine. The total pectin content was 1.53% in the pulp and 0.94% in the peel of tangerine. The peel of Korean tangerine, a by product in tangerine processing, would be a good source for the production of naringin, hesperidin and pectin.