• Knowledge Management Research
• /
• v.10 no.1
• /
• pp.53-70
• /
• 2009

This study empirically explored what promotes exploration, through a case analysis of a Korean SME (small and medium sized enterprise), based on the research framework which focuses on the identification and the selection of exploratory NPD (new product development) alternatives, and the accumulation of novel capabilities in new technology domains. The learning process of the exploratory NPD project described is as follows. The identification barrier of exploratory NPD project is relatively low. Constructive crisis is germane to selecting exploratory NPD alternatives and to enduring the long payback period. New separated R&D unit is likely to implement the exploratory NPD project. The length of the gestation period of the exploratory NPD project is related with the level of the conflict between old members and new members. This study identified several antecedents of the exploratory NPD project. Prior success promotes the identification process of the exploratory NPD projects. Constructive crisis is related with CEO's personal characteristics such as future oriented and proactive personality. The proactive involvement and persuasion of CEO are germane to reducing the conflict between old and new members and to the success of the exploratory NPD project. Based on the results, this study discusses several implications and future research directions.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.236-241
• /
• 2009

After analyzing the characteristics of the cooling dryer, the mixed cooling dryer was developed by adding the desiccant dryer which supplement the cooling dryer's demerits. Also, the hybrid desiccant cooling dryer was developed to use effectively the exhaust heat energy of the cooling dryer. It could make a more that 20 percent reduction in energy compared with the mixed desiccant cooling dryer. It has become essential to supply this equipment and search the suitable drying product.

• Journal of Electrical Engineering and Technology
• /
• v.3 no.2
• /
• pp.184-191
• /
• 2008

Electrical endurance is the critical characteristic of Magnetic contactors(MCs), which are widely used in such power equipment as elevators, cranes, and factory control rooms in order to close and open control circuits. Testing time, however, is not short in typical cases in which some method of reducing the testing period is required. This study shows the method of determining the stress level of electrical ALT(Accelerated Life Test) through optical temperature sensor and the relationship between 0.05 s and 0.1 s for on-time. The tool used for analyzing the test result is MINITAB. I will propose the method of determining the optimized stress level through optical temperature sensor, which will contribute to minimize the testing time and development period and also raise the product reliability.

• Design & Manufacturing
• /
• v.9 no.1
• /
• pp.18-22
• /
• 2015

Mold making and product manufacturing process was made by a die through a number of stages. Thereby, it takes a long period of time from the manufacture of mold until passed the products to consumers. However, it is not possible to meet the diverse desires purchasing of consumer. We made a 3D CAD Model aligned with product scan data using reverse engineering. Utilizing thereafter flow analysis to derive the optimal mold conditions, by applying the condition, and devised a mold fabrication process that is much shorter than the conventional process for fabricating a mold. In this study, the outlet cover to the product, it describes a process, as a result, it was confirmed that the number of steps can be shortened much more than the conventional process.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1799-1802
• /
• 2003

The commercial success of a new product is influenced by the time to market. Shorter product leadtimes are of importance in a competitive market. This can be achieved only if the product development process can be realized in a relatively small time period. New cutting inserts are developed by a time consuming trial and error process guided by empirical knowledge of the mechanical cutting process. The effect of previous cutting on chip formation and the surface residual stresses has been studied. The chip formation is not affected much. There is only a minor influence from the residual stress on the surface from tile first cutting on the second pass chip formation. Thus, it is deemed to be sufficient to simulate only the first pass. The influence of the cutting speed and feed on the residual stresses has been computed and verified by the experiments. It is shown that the state of residual stresses in the workpiece increases with the cutting speed. This paper presents experimental results which can be used for evaluating computational models to assure robust solutions. The general finite element code ABAQUS/Standard has been used in the simulations. A quasi-static simulation with adiabatic heating was performed. The path for separating the chip from the workpiece is predetermined. The agreement between measurements and calculation is good considering the simplifications introduced.

• Proceedings of the Korea Contents Association Conference
• /
• 2008.05a
• /
• pp.708-711
• /
• 2008

Through the analysis and the caomparation of the furture patterns between the China Ming dynasty and the Korea joseon dynasty, we try to searches for the culturl value of the appreciation possibility to the concept design by the aesthetic and objective tools in this paper. For making cultural and economic mind. cultural product as well-mated as 21st century is how traditional pattern might design, but how fassionable design in modern is attracted. As making and providing those mind, it is observed what the strategy of program activation could be. it is to be desired that is provided the use of product as traditional pattern of today on the traditional pattern of today based on the mentioned above. Hence, it is looked to activation in the modern pattern for development of cultural product.

• KDI Journal of Economic Policy
• /
• v.46 no.1
• /
• pp.53-89
• /
• 2024

The effects of the betterment of enforced intellectual property rights (IPRs) provisions on services export diversification are investigated. The analysis used an unbalanced panel dataset of 76 developing countries over the period of 1970-2014. The empirical analysis is based on the feasible generalized least squares estimator. It suggests that the implementation of weaker IPR protection fosters services export diversification in less developed countries (i.e., those whose real per capita incomes are less than US$US$ 1458.60), including those with a low level of export product upgrading. Conversely, in relatively advanced developing countries (countries whose real per capita income exceeds US$ 3356.80), including those with high levels of export product upgrading, the implementation of stronger IPR laws induces greater services export diversification. Finally, the analysis revealed the existence of a non-linear relationship between IPR protection and services export diversification. The implementation of stronger intellectual property laws spurs services export diversification in countries with high degree of IPR protection, especially when IPR protection exceeds a certain level, recorded here as having a score of 1.197. In contrast, in countries with weaker IPR protection, in particular those with IPR protection levels that score less than 0.915, it is rather the implementation of weaker intellectual property laws that promotes services export diversification.

• Journal of the Korea Convergence Society
• /
• v.11 no.4
• /
• pp.157-163
• /
• 2020

This paper is a product design convergence study to improve the aesthetic quality of CIGS solar cells for utilizing urban living structures, identifying problems of existing solar cell panels and drawing expert aesthetic elements for improving CIGS solar cells through survey and [Group discussion of experts] based on aesthetic elements of product design. Out of the aesthetic elements derived, the top three models of the product design process were 'environmental harmonization', 'pattern balance', and 'period universality' to derive the design and assembly design of the CIGS solar cell module for improving aesthetic quality, and applied to apartments, veranda, windows, and streetcar through product simulation. This study is suitable for applying aesthetic and CIGS solar cell function later to actual urban living structure, and future research direction needs to be studied on various patterns and structural design development of design.

• Journal of the Korean Society of Industry Convergence
• /
• v.21 no.3
• /
• pp.141-147
• /
• 2018

In a time when product development cycles are getting shorter and shorter, many companies are making efforts to develop products with high reliability in a short period of time, accelerated life test is widely used as a method to quickly evaluate reliability. Accelerated life test reduces the test life or the life of the product from the observed data by shortening the lifetime of the product or abruptly lowering the performance under the worse condition than the actual condition in order to shorten the test cost or the test time. In this paper, BL3640A-06P+RB35, DC12V model, which is used in the support device of an automatic rotation type digital signage, which display various information such as textures and images on a display screen in a public place or a commercial space, BLDC motors were subjected to a constant stress test and at the rotational speed of 1rpm, $180^{\circ}$ rotation and reverse rotation under actual use conditions, the stress was imposed on the rotating speed of 2rpm and the weight of the actual installed product from 22.2kgf to 10kgf were installed. The lifetime of the actual use environment condition is 23,545 hours and the rotation speed is accelerated. The life time of the acceleration condition with the additional weight is 1,380 hours. The acceleration factor is calculated as 17.06, the one year guarantee test day is 235 days to 14 days, of the period from 470 days to 28 days, and the third year from 704 days to 42 days. The test date of the BLDC motor was tested on the shortened test date, and the rotational speed and the current value were measured. It is found that there is no defect even if it operates as the test date corresponding to the specified one year warranty period and the 3 year accelerated life test which is experimented. Using the statistical technique of the regression analysis the expected time for the motor to defect to #4 samples was 20 years.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.257-257
• /
• 2017

Being producing and evaluating oat-chocolate were a major goal in this study. There were various steps to make oat-chocolate. First, oat was roasted with an optimum roasting-temperature. Second, discovered the best natural antioxidant to extend storage period and improve quality of goods. Third, developed processing goods and made an evaluation of quality properties. We selected optimum roasting condition of $160^{\circ}C$ for 15 min based on the acid value and the sensory characteristics such as color, taste, smell and overall preference of oat flour. As for natural antioxidants, we made use of 3 kinds of antioxidants (cactus, lavender and green tea) and two concentrations (0.5 and 1%). In investigating antioxidants, an acid value was significantly decreased as the antioxidants were added (p<0.05). Nothing was as low in acid value as a chocolate with 1 % lavender flour in 7 days. Findings showed the sensory characteristics of products containing antioxidants such as green tea and cactus, were higher than those of Cont. in 7 days. A product including 0.5% green tea marked the best sensory score among antioxidants. Compared cost among 3 antioxidants, green tea was the cheapest. In the end, 0.5% green tea was selected as an optimal antioxidant to make high-quality oat chocolate. We made an end product by mixing green tea (0.5%) and oat. With respect to Hunter's color L (whiteness), a (redness) and b (yellowness), as green tea added, L and a level showed an increasing tendency. However, an opposition result was expressed in b level. When compared pH value and total acidity, it was statistically identical between Cont. and product with 0.5% green tea (G-0.5). There was different acid value among specimens. The acid value of G-0.5 was lower than that of Cont. up to 7 days, resulting in lower acid value than a ready-made product (D-Co.). When we assessed the sensory characteristics, G-0.5 was higher than other specimens such as Cont. and ready-made products (D-Co. and H-Co.) up to 6 days after manufacture. Put previous findings together, the addition of 0.5% green tea increased an antioxidative effect as well as the sensory acceptability of oat-chocolate.