Thirty six barrows with an initial body weight of 28 kg were used to determine the effect of two dietary Se sources and a wide range of Se levels encompassing 0.3, 1.0, 3.0, 5.0, 7.0, and 10.0 mg/kg Se. The organic Se form was a Se-enriched yeast product, whereas the inorganic Se source was sodium selenite. The experiment was a $2{\times}6$ RCB design conducted in three replicates. Each barrow was placed in an individual metabolism crate and provided their dietary treatment and water on an ad libitum basis for a minimum 2 wk period, whereupon feed intake was adjusted to a constant intake within replicate at approximately 90% of intake for a 4 d adjustment period. Urine and feces were subsequently collected for a 7 d period and analyzed for Se and minerals. The results demonstrated that urinary Se was approximately 25% higher when pigs were fed sodium selenite (p<0.01), whereas fecal Se was lower by 25% (p<0.01). Se retention tended to be higher when organic Se was provided (p>0.15). Urinary Se increased as dietary Se level increased for both Se sources but increased more and at a high rate when sodium selenite was fed resulting in an interaction response (p<0.01). Fecal Se increased linearly as the dietary level of both Se sources increased, but the fecal Se from organic Se increased at a faster rate resulting in an interaction response (p<0.01). Se retention increased linearly (p<0.01) as dietary Se increased for both Se sources. The apparent digestibility of Se increased by Se level when pigs were fed sodium selenite, but not when the organic Se source was provided resulting in an interaction response (p<0.05). Retention of consumed Ca, Zn increased when pigs were fed organic Se (p<0.05) whereas P and Na retention were higher when the inorganic Se was provided. Mineral retention was not affected by dietary Se level except P. These results suggest that Se excretion by urine was the main route of excretion when pigs were fed sodium selenite but the fecal route when Se-enriched yeast was provided. The excretion of Fe, Zn, Mn, and Cu via urine and feces was not affected by high dietary Se level or dietary Se sources.
In the case of the domestic medical industry, work is conducting according to the convenience of the developer without guiding principles regarding tailoring and a number of processes and products that should not have been omitted considering the characteristics of corresponding sites were discovered. As a result of this omission, it was found that the delivery period was not met and problems arose for an extensive period of time after the activation of the system. The lack of critical processes and products had a negative impact on the productivity and quality of the software. This paper defines the processes that need to be followed as a basis and the products that need to be prepared during the development of a medical information system. Also, additional processes and products are presented depending upon the condition of the project. Especially, the step-by-step assessment processes and products to manage the assessment results were seriously dealt with in this study to strengthen the compliance of processes and the product quality.
Rhodopseudomonas palustris P4 can produce $H_2$ either from CO by water-gas shift reaction or from various sugars by anaerobic fermentation. Fermentative $H_2$ production by P4 is fast, but its yield is relatively low due to the formation of various organic acids. In order to increase $H_2$ production yield from glucose, P4 was investigated for the photo-fermentation of acetate which is a major by-product of fermentative $H_2$ production. Experiments were performed in batch modes using both light-grown and dark-grown cells. When the dark-grown P4 was challenged with light and acetate, $H_2$ was produced with the consumption of acetate after a lag period of 25 h. $H_2$ production was inhibited when a nitrogen source, especially ammonium, is present. When the dark-fermentation broth containing acetate was adopted for photo-fermentation with light-grown cells, $H_2$ production and concomitant acetate consumption occurred without a lag period. The $H_2$ yield was estimated as 2.4 - 2.8 mol $H_2/mol$ acetate and the specific $H_2$ production rate was as 9.8 ml $H_2/g$ cell${\cdot}$h, The fact that a single strain can perform both dark- and light-fermentation gives a great advantage in process development Compared to a one-step dark-fermentation, the combined dark- and light-fermentation can increase the $H_2$ production yield on glucose by two-fold.
Sohn, Kyung-Hee;Lee, Jin-Sil;Jeon, Hyung-Joo;Choi, Jung-Sun;Min, Sung-Hee;Park, Hyun-Kyung;Park, Jin
Journal of the Korean Society of Food Culture
/
v.11
no.2
/
pp.217-228
/
1996
Infanthood is a crucial period when mental and emotional developments take place along with physical growth. Adequate supply of nutrition is essential during this period and there is an urgent need for proper education and guidance on balanced nutrition. Therefore, this study was designed to assess to current status of lactation and to investigate mothers' perspectives on human milk and formular milk. As random samples for this study, a total of 352 mothers having infant under the age of 4 were surveyed. 27.3% of mother surveyed were breast-feeding, 38.0% were formula-feeding and 34.7% were mixed-feeding. According to the result of this study, the percentage of breast feeding was on the decrease, while the dependence on formular milk was on the rise. The main reason of formula-feeding was insufficient secretion of human milk on mothers part. The major factors that affect to select feeding method were employment status, degree of education, family income and age. Also, the interviewees desired the product fortified with special ingredients that are hot contained in formular milk currently available in the market. The most concerned problem of formula milk was indigestion and the interviewees wanted the formular milk to be improved digestibility.
Under the influence of growing popularity of "hallyu" (Korean wave), corporates that have copyrights such as music, movie, drama as their core competitiveness are showing continuing growth. In Addition, they built on contents are rapidly growing, interests in protection and management of intellectual property rights linked to contents are growing. Global contents development corporates are making great efforts to create profits out of copyrights. They could utilize original contents to strengthen brand value use it to produce additional contents in current market. Also they take advantage of existing storyline of the contents and strong brand to explore new markets. This paper looks into Value articulation model by Professor James Conley and analyzed the firms that utilized intellectual property rights to extend the period of protection, strengthen their competitiveness and succeeded in breaking into new market by using the rights they possess. Also, this paper examines the usage of intellectual property rights and business expansion strategy of of Iconix, the Korean entertainment company, which gained tremendous popularity in last ten years using this model. In Value articulation model, Conley classifies the process of exploiting the portfolio of the single product's(or service's) intellectual property right for a period of time into three stages ; value transference, value translation, value transportation. Pororo's strategy of utilizing intellectual property right is suggestive to domestic entertainment companies. Under the influence of hallyu" (Korean wave), domestic contents such as movies, dramas and music are enjoying the high level of popularity recently not to mention animations. In reality, Korean entertainment companies who have no background or experience of Intellectual property rights are not creating enough added values compared to fast growing market. It is believed Iconix's intellectual property rights management strategy will suggest positive aspects to domestic companies. Moreover, I hope various intellectual property rights management strategies including Conley's value articulation are studied and they can make contributions to managing domestic entertainment companies.
In recent years, many people in the manufacturing field have been making efforts to increase efficiency while analyzing manufacturing data generated in the process according to the development of ICT technology. In this study, we propose a data mining based manufacturing process using decision tree algorithm (CHAID) as part of a smart factory. We used 432 sensor data from actual manufacturing plant collected for about 5 months to find out the variables that show a significant difference between the stable process period with low defect rate and the unstable process period with high defect rate. We set the range of the stable value of the variable to determine whether the selected final variable actually has an effect on the defect rate improvement. In addition, we measured the effect of the defect rate improvement by adjusting the process set-point so that the sensor did not deviate from the stable value range in the 14 day process. Through this, we expect to be able to provide empirical guidelines to improve the defect rate by utilizing and analyzing the process sensor data generated in the manufacturing industry.
Kim, Byung-Gon;Shin, Hyunjin;Lee, Seunghak;Park, Junboum
Journal of Soil and Groundwater Environment
/
v.21
no.2
/
pp.1-7
/
2016
Ferrous slag is a by-product from steel making process and waste concrete is generated from construction activities. Large part of ferrous slag and waste concrete are recycled as construction materials. However, Ca2+ leaching out of ferrous slag and waste concrete in the water-contacting environment can cause a strength change. Strength can be reduced due to the dissolution of solid form of CaO which is one of the main contents of ferrous slag and waste concrete. On the other hand, strength can be enhanced due to the pozzolanic reaction of cementitious components with water. In this study, steelmaking slag, blast furnace slag, and waste concrete were aged by exposure to raining events, and the change of their compaction and shear strength characteristics was investigated. Optimum moisture content of all materials used in this study increased with aging period while maximum dry unit weight slightly decreased, implying that the relative contents of fine particles increased as the CaO solid particles were dissolved. Internal friction angle and shear strength of recycled materials also increased with aging period, indicating that the materials became denser by the decrease of void ratio attributed to the fine particles generated during the weathering process and the development of cementitious compounds increasing the bonding and interlocking forces between the particles. The results of this study demonstrated that mechanical strength of recycled materials used as construction materials has little chance to be deteriorated during their service life.
Structural control through seismic isolation using elastomeric rubber bearing, which is also known as High Damping Rubber Bearing (HDRB), has seen an increase in use to provide protective from earthquake, especially for new buildings in earthquake zones. Besides, HDRB has also been used in structural rehabilitation of older yet significant buildings, such as museums and palaces. However, the present design approach applied in normal practice has often resulted in dissimilar HDRB dimension requirement between structural designers and bearing manufacturers mainly due to ineffective communication. Therefore, in order to ease the design process, most HDRB manufacturers have come up with catalogs that list all necessary and relevant product lines specifically for structural engineers to choose from. In fact, these catalogs contain physical dimension, compression property, shear characteristic, and most importantly, the total rubber thickness. Nonetheless, other complicated issues, such as the relationship between target isolation period and displacement demand (which determines the total rubber thickness), are omitted due to cul-de-sac fixing of these values in the catalogs. As such, this paper presents a formula, which is derived and extended from the present design approach, in order to offer a simple guideline for engineers to estimate the required HDRB size. This improved design formula successfully minimizes the discrepancies stumbled upon among structural designers, builders, and rubber bearing manufacturers in terms of variation order issue at the designing stage because manufacturer of isolator is always the last to be appointed in most projects.
Purpose : The purpose of this research is to develop the optimized method and process in the reliability-growth target setting, especially for complex and repairable system (or products) such as vehicle and airplane, construction equipment. Method : A reliability-growth test plan specifies a scenario to achieve the planned reliability value (or reliability target). The major elements in test planning are reliability-growth starting time and reliability level at that time, reliability-growth rate and reliability-growth target. All of them except a reliability target can be referred to the previous development data and reference researches. The reliability target level is directly influencing to test period (or time) which is related to test and warranty cost together. There are a few researches about the reliability target setting method and but showing the limitations to consider the views of engineering, business and customer together. There is no research how to handle the target setting process in detail. Result : We develop the optimized method and systematic process in reliability target setting with considering such views. This research also establish the new concept as production capability which means company (or supplier) capability to product its products. Conclusion : In this research result, we apply the new method to a few projects and can set the reasonable test planning. The developing results is showing the good balance between the developing cost and warranty cost at market.
Journal of Korean Society of Industrial and Systems Engineering
/
v.27
no.1
/
pp.1-8
/
2004
This study intend to make easy modification, even if there is a new job or structure change, by modularizing program and computerize and automation of production control management used in CIM. under the condition where manager control production on the job-site, for increasing connection with other operation and management on the computer by monitoring center computer, recognizing information by computer is needed, it is possible by converting transaction. So this study goal is to make delivery control and order control fast and accurate by finding dynamic history of machine and production information in enterprise without input production and quality information by themselves with quality information system. So production increase and quality improvement are possible by diminishing manager's and producer's work with the result of the study combining POP and CIM, after that, in e-business and m-business period that every enterprise must pass, customer satisfaction and sales promotion are possible with employee's computerizing minds. these study result also can knowledge process condition with theoretical class and have a power in finding a solution with foundation of theoretical knowledge.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.