• Journal of Agricultural Extension & Community Development
• /
• v.20 no.1
• /
• pp.105-141
• /
• 2013

This study focuses on the vision-sharing practices, actual management capabilities and marketing competence for management which are supposed to be associated with the performance of village-based agricultural production sector. For this, vast literatures related to this issues were reviewed and analyzed. and which were used to establishment of research model. And then questionnaire were developed along the research model, survey were implemented using the questionnaire. In survey both of questionnaire and interview were used to obtain proper opinion. Total of 51 completed questionnaires were obtained and used to empirical analysis. The correlation method was used to investigate the relationships between factors affecting performance of agricultural production unit and performance. Major findings are as follows: (1) in overall, factors related to the vision-sharing or communication are not so important or even negative effects on the performance (2) in overall, factors of management competences are relatively associated with the performances positively (3) in overall, general management capabilities like planning or analyzing were positively related to the performance (4)significant factors which were related to the positive effects on the performances were alternatives considering risk of depreciation, securing stable customers, retention of professional personnels.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.04a
• /
• pp.520-525
• /
• 2011

As worldwide concern stands on global warming and greenhouse gases from internal combustion engine, the interests in technologies for a highly efficient powertrain has been increased. Concurrently the investigation to improve the deteriorated NVH, a by-product of energy efficient powertrain, is conducted seriously. The NVH performance of a new type of active engine mount that offers increased advantages over a passive hydraulic mount is examined using a newly developed 6-DOF simulator. The simulator is in the shape of Hexapod Stewart Platform adopting LEMA, a new type of actuator which is patented and commercialized by ACT Inc,, the world wide leader in the design, development, and manufacture of high performance linear electro-magnetic actuators for active vibration control. The target vibration signals of an aimed vehicle at four engine mounts are measured and simulated by 6-DOF simulator at the laboratory. The resulting NVH performances of the new active mounting system at a vehicle and on a simulator are examined and compared. Even though the active mount performance of lab test demonstrates less effective than the result of a real vehicle test, vibration reduction is identified through the simulator.

• Journal of the Korean Geotechnical Society
• /
• v.35 no.9
• /
• pp.15-28
• /
• 2019

Long-term allowable compressive Loads of PHC piles were analyzed based on qualification tests results by 17 small and medium PHC pile producing companies and product specifications by 6 major and 17 small and medium PHC pile producing companies. At the present stage, an average long-term allowable compressive load of PHC pile was designed at 70% level from current design data, and safety factor of 4.0 was applied to long-term allowable compressive loads of PHC pile despite of its excellent quality. Most quality standards of PHC pile are specified at KS F 4306. But compressive strength test method of spun concrete is specified at KS F 2454. As a result of analyzing quality test data supplied by each manufacturer, all quality test results showed higher performances than standard values. Therefore, it was considered that the capacity of PHC pile can be used up to the maximum allowable compressive load of PHC pile when PHC pile is designed.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.9
• /
• pp.857-862
• /
• 2013

Recently, the importance of GDI and diesel engine noise reduction is required, so newly designed components very close to noise sources are added in order to maximize the sound absorbing performances. In this study, the high temperature resistant part made with meta-Aramid nonwoven, which was applicable for high temperature applications of about $200^{\circ}C$ or more, such as engines and exhaust systems, was developed. And three-dimensional shaped component was successfully fabricated, and it was observed high temperature resistance of $260^{\circ}C$, lightweight properties and the noise was decreased by 1.0 dB with 70 g of product.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.05a
• /
• pp.76-79
• /
• 2004

The use of recycled aggregate concrete is increasing faster than the development of appropriate design recommendations. This paper is making advances in the recycling of waste concrete material for use as recycled aggregate to make secondary concrete product. Using recycled aggregates from demolished concrete, we manufactured concrete blocks to experiment overall performance in feasible performances. This paper reports limited experimental data on the structural performance of shear wall used concrete blocks made in recycled aggregates. Reinforced concrete frame and shear walls were tested to determine their diagonal cracking and ultimate shear behavior. The variable in the test program was the existence of infilled wall used concrete blocks Made in recycled aggregates. Based on the experimental results, Infilled wall has a high influence on the maximum strength and initial stiffness of reinforced concrete frame. Structural performance of specimen WSB1 and WSB2 is quite different from RCF specimen, particularly strength, stiffness and energy dissipation capacity.

• Journal of Biosystems Engineering
• /
• v.28 no.5
• /
• pp.395-402
• /
• 2003

Standard ginseng seedling, selected after one year's rearing in the seedling bed has been conventionally transplanted in Korea. Recently, the direct seeding areas have been increasing to product high quality ginsengs for red-ginseng processing. Reciprocating push-rod brush, holed-roller and vacuum suction seeders, planting with 30 ${\times}$ 30mm spacings and adjustable to the folds were designed and theirs performances were evaluated. The developed three types of seeders reliably performed at the success rate over 95% with less than 10% in slip rate, and could be used a seeder for the greater spacings by adjusting metering parts. The research concluded that the vacuum suction seeder was the most feasible and practical with the greatest metering success and the least slip among three type seeders of the reciprocating push-rod brush, holed-roller and vacuum suction seeders. The vacuum suction seeder holds a seed with each needle nozzle using the negative pressure created by a vacuum pump. The capacity was 24.5 times greater than a man power at the speed of 5 m/min.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2003.11a
• /
• pp.152-157
• /
• 2003

This study represents the newly advanced formulation of hydraulic fluids for extended drain interval and introduces the performance results of used oil samples from various excavators. The used oil samples, in this paper show that there is a sharp change in viscosity drop and moderate additive depletion when viscosity index of hydraulic oil is very high. For the extension of hydraulic fluid life, it is necessary to improve the stability of viscosity and oxidation. New target properties from the used oil analysis were proposed for extended life. Performance of newly developed hydraulic oil based on used oil analysis is compared with previously used one. The properties of new formulation are the viscosity index of 140 and improved thermal stability consists of VHVI base oil. Field test results showed the possibility of extension of fluid life. Additionally, for development of high performance product, new required properties and performances were discussed.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.1 s.160
• /
• pp.77-84
• /
• 2007

The purpose of this study was to investigate and to compare the performances of silicone laminated materials sold for swimming cap in market, to get the basic data for product development. We selected 4 specimens and tested their air permeability, waterproofness and breathability. We also tested the physical and mechanical properties of the specimens using KES system. Silicone-laminated material was not bursted on high hydraulic pressure since silicone membrane gave waterproofness while PU/Polyester substrate gave elasticity. It didn't have air permeability and breathability at all. Any toxic materials such as Formaldehyde, Deldrin, PCP, Amin, TDBPP were not detected in silicone-laminated material and other materials. Silicone-laminated material had higher stretchability with the low force but it had lower elastic recovery and shape stability comparing to PU laminated material. It had lower flexibility than PU laminated material. It had lower unrecoverable amount in shearing direction. Friction coefficient was higher in silicone-laminated material than PU laminated material due to its surface stickiness. It was compressed easily and its compression resiliency was higher with compared to PU laminated material.

• Journal of Distribution Science
• /
• v.20 no.12
• /
• pp.71-79
• /
• 2022

Purpose: This study aimed to apply factors of successful online marketing strategy for food distribution SMEs and the effects of these successful strategies to achieve higher performances. Research design, data, and methodology: Questionnaires were used to collect data from 400 samples of SMEs in Thailand. We employed structural Equation Modeling techniques for data analysis. Results: The results revealed that distribution strategies directly affected the success of business operations, as follows: 1) Customer communication channels, product variety, preserved privacy, and personal service had direct positive effects on the distribution success in terms of financial perspective, customer perspective, internal process perspective, and earning and growth perspectives; 2) Ability to learn a competitor had a positive direct relationship with the distribution success in terms of financial perspective and learning and growth perspectives, excluding customer perspective and internal process perspective; and 3) Responses to market on time had a positive and direct influence on distribution success in terms of customer, internal process perspective and learning and growth perspectives excluding financial perspective. Conclusions: This research has made an essential contribution to SMEs that they should focus on and adopt these 6ODS+4BSC concepts as development guidelines for food distribution SMEs to be more efficient and effective.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.11
• /
• pp.6472-6477
• /
• 2014

This study examined the trends of an illustration artist's art marketing widening its area in recent years and proposes a design concept of color cosmetics. Art marketing is a type of culture marketing and means marketing through exhibitions, performances and other artistic activities. Free artistic sensibility expression in which the artistic motif is melted into a product beyond the works of a particular artist, and the product, in turn, can be reflected in the canvas, has attracted attention. The works of illustrators are widening their area into the item in life not canvas. This paper proposes the color cosmetics design that reflect art marketing. The main target who proposed the design concept was trend-oriented and in their early to mid-20s with a strong personality, showing a strong tendency of attracting attention and being recognized. To emphasize the design concept of color cosmetics packaging design, the progressive image of the target class was reflected through brilliant and intense color combination. The cultural value and meaning are provided as the artistic mood becomes a part of life.