• Journal of the Korea Institute of Military Science and Technology
• /
• v.3 no.2
• /
• pp.166-178
• /
• 2000

As the 21st century signifies an information-oriented society, the computer integration takes place in all walks of human presence. Needs for computer and network-integrated automation present new challenges in military as well as commercial facility systems engineering. Since the first intelligent building appeared in USA in 1984, it gradually became an essential capability for the building industry requirement these days. Intelligent Building System(IBS) is evolving to be very complex because there are many subsystems such as telecommunication(TC), office automation(OA), building automation(BA), security, construction environments, etc. During the planing phase of IBS development, therefore, a disciplined systems engineering must be performed to analyze stake- holder's requirements to build an optimized system while minimizing trial-and-error expenses and risks. This paper presents a conceptual design of BAS applying systems engineering methods. The contribution of this study includes the development of IBS subsystem specification for building automation subsystem, which is a part of IBS, using the methodology of requirement analysis, functional analysis, synthesis, and verification. A computer-aided systems engineering s/w, RDD-100, was used to improve the system design efficiency and to promote the product design knowledge management for reuse in later design programs.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.10
• /
• pp.1-7
• /
• 2008

This paper describes the proposal, design, and implementation of a novel WDMX controller which can provide versatile light effects with the increased capability of the mobility and the number of universes for LED lights. Both the algorithm for DMX protocol and how to implement the frame based on a 8bit micro-controller are explained. The conversion algorithm between the DMX frame and wireless LAN 802. 11b protocol stack is introduced and implemented. In final, some experiments are made to verily the interoperability of the developed WDMX controller with a commercial product of LED lights. 최대 9,999 staves with 30 refresh rate per second may have capability to show various light effects.

• Journal of Korea Trade
• /
• v.23 no.7
• /
• pp.156-172
• /
• 2019

Purpose - Without question, globalization has presented different opportunities to entrepreneurs seeking to expand their companies in foreign markets. The aim of this study is to examine the relationship between entrepreneurial orientation, entrepreneurial activity, information internalization, and product differentiation in export oriented firms. As such, entrepreneurial activities are divided into exploitative and exploratory opportunities. These opportunities are crucial in improving firms' performance. Design/methodology - A structural questionnaire was developed using 21 factors/indicators from previous researches. The subjects of this study were recruited using convenience sampling in export SMEs in the Seoul Metropolitan Area. Data were collected through visits or e-mails from the export managers, executives, and CEOs of export SMEs in advance. 321 questionnaires were collected over a period of one month. 316 questionnaires were used in the final analysis. Findings - First, International Entrepreneurial-orientation (IE) has a positive effect on the exploration and exploitation of business opportunities. Second, the exploration and exploitation of business opportunities have a positive impact on information internalization. Third, information internalization has a significant effect on product differentiation and plays a mediating role in seeking opportunities, utilizing opportunities, and differentiating products. Originality/value - This study contributes to the development of academic discussions by explaining existing research gaps. First, there is currently a lack of research focusing precisely on the product differentiation capability of SMEs in manufacturing field in terms of IE. To bridge these gaps, we examined the entrepreneurial factors impact on product differentiation and tries to expand the discussion about the internationalization of SMEs, which were mainly focused on IT companies, and manufacturing companies. Second, there is no intuitive explanation regarding international entrepreneurial activity in terms of exploration and exploitation within existing. In this study, international entrepreneurship activities were classified in terms of exploration and exploitation.

• Journal of Fashion Business
• /
• v.22 no.2
• /
• pp.88-106
• /
• 2018

The domestic fashion industry is not able to exceed the level of fashion that exists in advanced countries due to the relatively weak design competitiveness and the differentiated capability of product development. In order for the domestic fashion industry to become a growth industry that is valued in the world market of infinite competition, a step-by-step support system that can demonstrate and maintain the creative ability of designers is needed. Therefore, this study proposes a template - based 3D virtual fashion technology and a digital fashion platform based on it. The proposed template - based 3D virtual fashion technology is designed to clearly communicate the intention of designers and to be able to instantaneously view the results, thereby reducing the time and cost of producing prototypes. In addition, the digital fashion platform based on the template is designed as a collaborative platform based on idea sharing, which dramatically improves the process of confirming the prototype and initiating the product planning and manufacturing stages. This new technology can contributes to the formation of a business environment and a new area within the existing fashion industry and can be utilized for the development of the fashion industry in the future.

• Journal of Korean Society for Quality Management
• /
• v.39 no.3
• /
• pp.400-411
• /
• 2011

Process variables are factors in an experiment that are not mixture components but could affect the blending properties of the mixture ingredients. For example, the effectiveness of an etching solution which is measured as an etch rate is not only a function of the proportions of the three acids that are combined to form the mixture, but also depends on the temperature of the solution and the agitation rate. Efficient designs for the mixture components-process variables experiments depend on the mixture components-process variables model which is called a combined model. We often use the product model between the canonical polynomial model for the mixture and process variables model as a combined model. In this paper we propose three starting models for the mixture components-process variables experiments. One of the starting model we are considering is the model which includes product terms up to cubic order interactions between mixture effects and the linear & pure quadratic effect of the process variables from the product model. In this paper, we propose a method for finding robust designs and practical designs with respect to D-, G-, and I-optimality for the various starting combined models and then, we find practically efficient and robust designs for estimating the regression coefficients for those models. We find the prediction capability of those recommended designs in the case of three components and three process variables to be good by checking FDS(Fraction of Design Space) plots.

• Journal of the Korea Convergence Society
• /
• v.10 no.7
• /
• pp.169-174
• /
• 2019

Because the warm and cozy demand of automotive driving seat increases, the research development of heating seat has been actively made. In this study, the thermal stress analysis and the structural analysis were carried out with three kinds of heating seats of A, B and C. By executing the thermal analysis with the same material, model A was shown to have the heat transfer better than model B or model C at the study result. So, it could be seen that the heat transfers became different each other though models had the same material according to the configuration of product. Adding the hot wire in order to expect the safer heating can be better heating, but there is the limit on the aspect considering the capability in contrast to the price of product. Generally, model B is thought to be safest thermally than model A or model C in every respect. As the design data of the automotive heating seat product with the durability and safety acquired by this study result are used, the artistic environment can be promoted by being grafted onto the automotive driving seat.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.4 s.175
• /
• pp.811-823
• /
• 2000

In design and manufacturing airframe structures which are composed of a lot of sub-assemblies and large complex profile shapes it is difficult to reduce so called hardware variations. Accordingly cost increasing factors for manufacturing airframe parts are much more than other machine parts because of the variability of fabricated details and assemlies. To improve cost and quality, accurate assembly methods and DPD techniques are proposed in this paper which are based upon using CAD/CAM techniques, the concept of KC's and the coordinated datum and index throughout the design, tooling, manufacturing and inspection. The proposed methods are applied to produce fuselage frame assemblies and related engineering aspects are described regarding the design of parts and tools in the context of concurrent digital definition. First articles and consequent mass production of frame assemblies shows a great improvement of the process capability ratio from 0.7 by the past processes to 1.0 by the proposed methods in addition to the cost reduction due to the less number of tools, reduced total assembly times and the space compaction needed by massive inventory. The need to achieve better Cpk, however, and future studies to be investigated will be addressed briefly.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.1
• /
• pp.72-78
• /
• 1990

An interactive computer program has been developed to design a pattern and risers for the production of castings of high quality. In our system, the user models the shape of a final product by using the system's modeling capability, a pattern is generated in a three dimensional model by eliminating the holes and adding shrinkage allowances and drafts, the proper riser is created automatically, and they are united together to yield the three dimensional model of the portion of a mold assembly. The mold can be completed after the runners and the gating systems are designed, modeled, and united, which will be described in part 2 of this work. The unique feature of this work is a realization of an automatic design of the pattern and risers by integrating the modeling capabilities and the design equations used in the real practice.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.1222-1229
• /
• 1993

An advanced design environment , which is based on adaptive and knowledge -based finite elements (INTELMESH), has been developed. Unlike other approaches, INTEMMESH incorporates the information about the object geometry as well as the boundary and loading conditions to generate an ${\alpha}$-priori finite element mesh which is more refined around the critical regions of the problem domain. INTEMMESH is designed for planar domains and axisymmetric 3-D structures of elasticity and heat transfer subjected to mechanical and thermal loading . It intelligently identifies the critical regions/points in the problem domain and utilize the new concepts of substructuring and wave propagation to choose the proper mesh size for them. INTEMMESH generates well-shaped triangular elements by applying trangulartion and Laplacian smoothing procedures. The adaptive analysis involves the intial finite elements analyze and an efficient ${\alpha}$-posteriori error analysis involves the initial finite element anal sis and an efficient ${\alpha}$-posteriori error analysis and estimation . Once a problem is defined , the system automatically builds a finite element model and analyzes the problem though automatic iterative process until the error reaches a desired level. It has been shown that the proposed approach which initiates the process with an ${\alpha}$-priori, and near optimum mesh of the object , converges to the desired accuracy in less time and at less cost. Such an advanced design/analysis environment will provide the capability for rapid product development and reducing the design cycle time and cost.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.6
• /
• pp.523-528
• /
• 2015

As the sizes of mobile phones and watch phones decrease, the joining bolt for the products should also be decreased to a miniature size. However, the miniature-sized bolt has to support sufficient joining and anti-releasing torque to keep the product fastened. In this study, the thread shapes are designed to improve anti-releasing performance of bolts. Especially, when bolt materials is stronger than nut materials, the design of thread shapes is needed, like bolt for wood, to improve the fastening capability. Through the joining and releasing analyses of bolts, the thread shapes for SUS302 bolt and Mg alloy nut are newly designed. It was shown that the newly designed bolt has 20 % higher anti-releasing torque and 35% lower torque loosening slope compared to the standard bolt.