• The Journal of Industrial Distribution & Business
• /
• v.11 no.11
• /
• pp.7-18
• /
• 2020

Purpose: The Emission Trading Scheme (ETS), which enables structuring emission credits as a financial product, is taking a crucial position of global collaboration against climate change. Previous studies that have covered ETS subjects from the macro perspective contribute to facilitating legal enactment of this scheme. However, they have rarely addressed challenges aligned with issues arising from labor burdens for ETS works from the business perspective. Research Design, data and methodology: This study presents conceptual models that are expected to help design an electronic system. The study model contains four modules: emission allocation, data interface, reduction technology sharing, and emission trading. Two validation approaches, the Analytic Hierarchy Process (AHP) and regression analysis, are applied in confirming the feasibility of the proposed model. Results: This study suggests an IT system methodology to help improvement of the current K-ETS mechanism. In particular, this study addresses effectiveness for real businesses and the adaptability of this mechanism to other nations. Conclusions: The proposed IT platform diagram can contribute to successful operation of ETS by providing multiple benefits to participating companies through in-house allocation mechanisms, the soft-landing of ETS adoption to participating companies through reduction of technology-sharing, group purchases, and transaction costs through the trading system.

• Earthquakes and Structures
• /
• v.12 no.2
• /
• pp.201-211
• /
• 2017

This paper experimentally investigates the effect of yield strength of reinforcing bars and stirrups on the seismic performance of reinforced concrete (RC) circular piers. Reversed cyclic loading tests of nine-large scale specimens with longitudinal and transverse reinforcement of different yield strengths (varying between HRB335, HRB500E and HRB600 rebars) were conducted. The test parameters include the yield strength and amount of longitudinal and transverse reinforcement. The results indicate that the adoption of high-strength steel (HSS) reinforcement HRB500E and HRB600 (to replace HRB335) as longitudinal bars without reducing the steel area (i.e., equal volume replacement) is found to increase the moment resistance (as expected) and the total deformation capacity while reducing the residual displacement, ductility and energy dissipation capacity to some extent. Higher strength stirrups enhance the ductility and energy dissipation capacity of RC bridge piers. While the product of steel yield strength and reinforcement ratio ($f_y{\rho}_s$) is kept constant (i.e., equal strength replacement), the piers with higher yield strength longitudinal bars are found to achieve as good seismic performance as when lower strength bars are used. When higher yield strength transverse reinforcement is to be used to maintain equal strength, reducing bar diameter is found to be a better approach than increasing the tie spacing.

• Health Policy and Management
• /
• v.26 no.4
• /
• pp.279-288
• /
• 2016

Graphic health warning on the tobacco product package is a cost-effective tobacco control policy to convey information on harmful effect of tobacco use to health, and it is known not only to motivate smokers to quit but also to deter adolescents from start smoking. In case of Korea, amendments to National Health Promotion Act requiring implementation of graphic health warning had been submitted 13 times, from 2002 to May 2015. In May 2015, the amendment had been approved by the National Assembly and it enters into force on December 23, 2016. This research analyzed the discussions from Health and Welfare Committee of the National Assembly during the implementation of the graphic health warning in order to study decision making process of legislators. Study found that there was a shift from a general opposition on implementing graphic health warning at first to a harsh conflict over relaxation of the regulation once discussing the implementation in earnest. Particularly, while the group supporting the implementation of the graphic health warning or opposing relaxation advocated the amendment with scientific and knowledge-based evidences including the World Health Organization Framework Convention on Tobacco Control, the group opposing the adoption of the amendment itself or suggesting relaxation tended to defend their position with empathy on smokers or tobacco industries.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.15 no.4
• /
• pp.187-195
• /
• 2019

The purpose of this study is to analyze the adoption of Kakao Bank in terms of benefits (functional, social, experiential, economic benefits) and differentiated services (customization and service diversity) considering service types. Benefits are personal value consumers attach to the product or service attributes and, therefore, more important than attributes of service itself when using Kakao Bank in the internet based environment. Data was collected using an online and offline survey of 131 Kakao Bank users and analyzed the data using structural equation model (SEM). The results of empirical analysis using SmartPLS show that functional benefit, experiential benefit, and customization are significantly related to the user's satisfaction, but economic benefits, social benefit, and service variety are not. Customer's satisfaction are also showed significantly to be related to the all types of Kakao Bank usage(balance check, transfer, and other services). This study has the significance in that it examines the user's satisfaction and usage of Kakao Bank in terms of benefits and differentiated services while other studies analyzed banking services focusing on the attributes of banking channel itself.

• Journal of Korea Society of Industrial Information Systems
• /
• v.10 no.1
• /
• pp.81-88
• /
• 2005

The POS system has been developing into an co-operational information integration system, enlarging its range of application - from basic data collection to production information, inventory management and customer service. The POS system will increase operation efficiency. It is my suggestion that POS system should be adopted in domestic industries regardless of increasing adoption of the RFID. This paper was made studied of the POS system and the practical use of POS system in order to maximize the efficiency of inventory management for various companies.

• YAKHAK HOEJI
• /
• v.57 no.6
• /
• pp.432-441
• /
• 2013

It's been almost 20 years since the adoption of Good Manufacturing Practices (GMP) in Korea since 1994. There have been big progresses in the GMP regulations and its implementations. 'New GMP' in 2008 has adopted validation, pre-approval GMP evaluation, annual quality review, etc.. Upon the submission of PIC/S (Pharmaceutical Inspection Cooperation Scheme) application by Korea's Ministry of Food and Drug Safety in April, 2012, Korea is facing new opportunity to level up Korea GMP regulations. As such, this study suggested GMP revision points by comparing and analyzing the differences between PIC/S GMP and Korea GMP. Those areas which GMP is not required such as radiopharmaceuticals and medical gases should adopt GMP. And independent GMP regulation is needed for Active Pharmaceutical Ingredients and investigational medicinal products. Also, those regulations shall be implemented in the higher level of legal status. Finally, rather than pursuing GMP harmonization only for PIC/S membership, GMP improvement in the long term shall be taken into consideration by reflecting current quality issues such as ICH Q8 (Pharmaceutical development), Q9 (Quality Risk Management) and Q10 (Pharmaceutical Quality System).

• International Journal of Quality Innovation
• /
• v.3 no.2
• /
• pp.159-173
• /
• 2002

Any organization's Six Sigma program may be at high risk without heeding the lessons learned from the past and that tries to operate without a robust business foundation. A foundation that preferably should consist of stepping-stones such as a 5-S house-keeping program, an effective Integrated Management System (IMS), which includes a strong focus on planning for quality to fully capture the Voice of the Customer (VOC), and an organization-wide training scheme, as well as a reliable Cost of Poor Quality (COPQ) system. That's the best advise I can give to any organization that wishes to embark on a Six Sigma improvement program and hope to be successful. The paper will elaborate on the above issues and provide suggested solutions based on the review of published historical information and the experiences encountered over the last four decades by the author, as a quality practitioner and consultant, in industries that produced safety-critical product. This author maintains that few fundamentally new or useful things have been created in the field of Quality during the last couple of decades. Nevertheless, this paper deliberates on a number of relatively “newer” issues including the concept of “three types of customers”, the CTC, “Critical To Customer” term, the eight Quality Management Principles of the new ISO 9000 family, the growth of industry-specific standards, the adoption of Integrated Management Systems, the rebirth of AS2561 COQ standard, the spread of Six Sigma as well as related ASQ certification and the need for a robust business foundation to ensure Six Sigma survival.

• Asian Journal of Business Environment
• /
• v.10 no.3
• /
• pp.13-22
• /
• 2020

Purpose: Vietnam's financial sector has grown substantially but microfinance institutions (MFIs) still face up many challenges in providing financial services to underserved customer segments, including small businesses, rural populations, and urban migrants. The recent worldwide explosion of fintech, including in Vietnam, promises to fill this gap. The purpose of this paper is to analyze fintech activities in microfinance sector and recommend for fintech adoption of MFIs in Vietnam. Research Design, Data and Methodology: The paper's data is mainly based on international organizations such as Asia Development Bank (ADB), Food and Agriculture Organization of the United Nations (FAO) and Vietnamese organizations such as Vietnam Microfinance Working Group. The authors suggest new directions for microfinance activities in Vietnam. Results: In recent years, the application of fintech in microfinance sector has brought many good results, such as improving the quality of products and services, easy access to many customer groups, and scaling up the operating model. Conclusion: MFIs in Vietnam have developed new products and services by applying fintech. The application of technology and digital solution has supported MFIs in Vietnam to gradually achieve targeted growth through expanding geographical inclusion/scale, enhancing product supply/provision, helping in-depth customer understanding as well as improving operational efficiency.

• Journal of Information Technology Applications and Management
• /
• v.29 no.1
• /
• pp.1-28
• /
• 2022

To realize the vision of internet of things (IoT), where it is expected to bring significant impact to the global economy in the future, consideration of business models in the IoT context is necessary. This research attempts to build an enhanced artifact business model framework based on the definitions of IoT and literature on business models for analysis of IoT businesses. The framework is used to analyze four different types of players: the owner of things, vendors of devices, providers of connectivity and providers of IoT application services. The findings suggest that the owners of things tend to partner with ICT players to complement their weakness, and it tends to be connectivity providers. The device vendors leverage their strength of devices and device platforms to attract and enable 3rd party sensor/devices to interconnect, while the service providers are aiming to penetrate into customer premise. These lead to the following recommendations for non-IT players to consider in expanding into IoT business: 1) take into account differences in product development process between IT and non-IT businesses in expanding into IoT market; 2) collaborate with ICT players that acknowledge and understand the differences.

• International conference on construction engineering and project management
• /
• 2005.10a
• /
• pp.845-848
• /
• 2005

Technology transfer (TT) has been defined as the shared responsibility between the source and the destination for ensuring that technology is accepted and at least understood by someone with the knowledge and resources to apply and/or use the technology. The adoption of TT in construction industries is necessary for economic growth to occur in developing countries such as Thailand. This process should provide numerous benefits for the host sector in areas such as increased productivity, enhancement of product quality, cost savings, improvements in market share and entry to new markets. However, there are many factors, which may impact on the TT process and its subsequent outcomes for Thai construction firms and individuals, including, the transfer environment, learning environment, transferor characteristics and transferee characteristics. The performance and interaction of these enablers will influence the degree of value added to the local construction sectors in areas such as economic advancement, knowledge advancement and project performance. This paper presents a conceptual framework for international TT that accommodates the numerous factors believed to impact on the processes effectiveness. Through a Pilot Study, where 27 industry professionals from Thailand were interviewed, the significant factors which impact on the TT process have been identified along with the strength of interrelationship between individual and groups of factors. Future research seeks to target a greater sample of respondents with the view to validate the conceptual model and apply it on a number of large Thai projects where international TT was incorporated into the project agreement.