• Applied Chemistry for Engineering
• /
• v.16 no.3
• /
• pp.305-311
• /
• 2005

The thermal plasma process has excellent characteristics such as high temperature, high chemical activity and rapid quench, and has been applied to various fields. In this review, we briefly describe the characteristics for the process and the system components for producing ultra-fine powders including metal, ceramic, and composites. The key technology for the process will be discussed. We aimed to demonstrate the feasibility of the process for producing high quality ultra-fine powders using thermal plasma.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.125-127
• /
• 2014

Major Japan animation production house, Studio Ghibli has produced many masterwork animations and achieved commercial and artistic success. Therefore they has surpassed regional Japan, became the world major animation company and acquired grate fame. But Hayao Miyazaki who is the leader of the Studio Ghibli has failed making a his heir. To make matter worse his retirement is approaching, rumors that break up the studio Ghibli has been spread in recent time. Finally, In a general meeting of stockholders of studio Ghibli, June 2014, they announced that split up the animationmaking team. That means studio Ghibli changed their animation producing process, not disband a studio Ghibli. This paper will analyze reasons why did they have to change their animation producing process.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2002.05a
• /
• pp.149-153
• /
• 2002

The commutator of an automotive fuel pump motorhas been produced through various processes such as forging, segmenting, and assembling. And the conventional method producing the commutator of an automotive fuel pump motor is not appropriate for saving material and cost, because it makes each segment separated one by one. Therefore a new process design is required in order to avoid the assembling process. In this study, a new process design of the commutator has been carried out to save material and manufacturing time by FE analysis. In the FE analysis, three forging processes are proposed for producing copper(ASTM C11000) commutator of an automotive fuel pump motor. And forging experiments are performed to make an unsegmented commutator in order to verify the theoretically proposed process. And then, in order to get the final product the forged commutator is passed through various postprocessing such as machining, bending, resin forming, and shearing process. From the experimental result the forging process proposed from the FE analysis is verified to be an economical method for producing the commutator for an automotive fuel pump motor.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.905-909
• /
• 2002

Commutators of a starting motor for automobiles has been produced through various processes such as forging, segmenting, and assembling. And the conventional method producing an automotive motor commutator is not appropriate for saving material and cost, because it makes each segment separated one by one. Therefore a new process design is required in oder to avoid the assembling process. In this study, a new process design of the commutator of an automotive starting motor has been carried out to save material and manufacturing time by FE analysis. In the FE analysis, three forging processes are proposed for producing the copper(ASTM Cl1000) commutators of a starting motor. And forging experiments are performed to make an unsegmented commutator in order to verify the theoretically proposed process. And then, in order to get the final product, the forged commutator is passed through various postprocessing such as resin terming, and machining. From the experimental result, the forging process proposed from the FE analysis is verified to be an economical method for producing the commutator of an automotive starting motor.

• Proceedings of the Korea Contents Association Conference
• /
• 2006.11a
• /
• pp.205-209
• /
• 2006

This thesis is about to establish organizing process of writing the producing scenarios, one of three kinds of comics scenarios grouped by the use of each kind; creating, dramatizing, and producing. The bases of the methods to write the producing scenarios for more effective communication will be prepared by the discussions on this thesis.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.13 no.1
• /
• pp.43-49
• /
• 2005

There are several ways to mold the complex material, and it is divided to vacuum pack mold, compression mold, and hand lay up for a high molecular substance as a basic material. Moreover, it can be divided to general manufacturing (Single form) and mold manufacturing(Mold form) under normal temperature for Firefly. Firefly was manufactured with hand lay up and general manufacturing that using the foam core, glass fabric, and template without mold. However, mold manufacturing that is producing the surface by semi-sandwich using thin foam core and glass fabric then reinforce the inside with spar and rib is on developing. Mold manufacturing can make easy to production, standardize the quality, and possible to mass producing. In this paper, we present the mold producing process for canard aircraft "Firefly", and the problems and solutions during producing Firefly. Moreover, it complements the defect that the problems caused by master manufacturing error when produce several masters of a large part, and make the manufacturing process to be shortened by the replacement from the supplementary plate to the foam that is installed when producing lay up mold.

• Spatial Information Research
• /
• v.15 no.1
• /
• pp.67-80
• /
• 2007

The land cover map represent the state of earth surfaces. It can be used as basic data to explore present conditions of earth surfaces and develop future plans for local areas. To produce the land cover map with efficiency, gathering geographic information from satellite images is important. Exporting, building, and managing processes on the land cover information are needed as well. In this study we aim to review the producing process of the level-2 land cover map in detail and enhance it. h present status of the producing process of the land cover map in Korea is reviewed, problems of the process are explored, and measures for improving it are proposed. The criteria for fixing boundaries and providing attributes for the land cover map are proposed. This proposed criteria may solve problems in a present producing process. The improving measures proposed in this study should be continuously revised in future studies.

• Transactions of Materials Processing
• /
• v.20 no.8
• /
• pp.611-618
• /
• 2011

Flow forming is an incremental forming process in which rollers are used to form cylindrical parts with repeated turning of both roller and starting material. Both sheet and tube can be used as the starting material. The process is highly useful for producing hollow shaped parts from a tube, with the benefit of the average strain in the final shape being significantly lower than that from a sheet material. In the present study, the flow forming process was studied and optimized for producing a hollow shaped part from seamless steel tube by both experiment and numerical analysis. Upon considering the difficulty of forming seamless steel sheet, the thickness reduction was distributed over several tool paths. In the end, an optimum process condition was attained, and the experiment verified the simulation results.

• Microbiology and Biotechnology Letters
• /
• v.20 no.1
• /
• pp.110-113
• /
• 1992

In the screening process of anti- or desmutagenic substance from the various microbial metabolites with the method of Ames and Rec-assay, a desmutagenic substance producing bacterial strain which inactivates the mitomycin C-induced mutagenicity was isolated and identified as Psudomonas sp. AM-10.

• The Korean Journal of Archival Studies
• /
• no.2
• /
• pp.103-128
• /
• 2000

The classification of records is basically different from that of librarian materials because records have a nature of spontaneous and correlated product made during the process of work, as well as a value of proof and information. Hence the main task of archival management institute is to classify those records through the process of transfer and receipt for the purpose of reservation and utilization of their value. Therefore, the records should be classified by the manner, which reflects the function and organization of producing institute, and in turn, the principles of producing site and original record order should be maintained for this purpose. The characteristics of librarian materials and records and the tasks of management institutes form the basis of very different principles. The records can present the characteristics of producing institute and maintain the value made by the correlated nature as they are classified, managed and preserved by the above principles, In addition, it is known how and why they were produced and utilized, as well as they can be preserved in original form and effectively arranged, recorded and managed.