• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.2
• /
• pp.1-13
• /
• 1999

As the complexity of DSP (Digital Signal Processing) applications increases, the need for new architectures supporting efficient high-level language compilers also grows. By combining several DSP processor specific features, such as single cycle MAC (Multiply-and-ACcumulate), direct memory access, automatic address generation, and hardware looping, with a RISC core having many general purpose registers and orthogonal instructions, a high-performance and compiler-friendly RISC-based DSP processors can be designed. In this study, we develop a code-converter that can exploit these DSP architectural features by post-processing compiler-generated assembly code, and evaluate the performance effects of each feature using seven DSP-kernel benchmarks and a QCELP vocoder program. Finally, we also compare the performances with several existing DSP processors, such as TMS320C3x, TMS320C54x, and TMS320C5x.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.3
• /
• pp.479-486
• /
• 2020

In this paper, we present a design method for improving the linearity and dynamic range of the analog current mode multiplier circuit, which is one of the key devices in an analog current mode AI processor. The proposed circuit consists of 4 quadrant translinear loops made up of NMOS transistors only, which minimizes physical mismatches of the transistors. The proposed circuit can be implemented at 117㎛ × 109㎛ in 0.35㎛ CMOS process and has a total harmonic distortion of 0.3%. The proposed analog current mode multiplier is expected to be useful as the core circuit of a current mode AI processor.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.1
• /
• pp.109-114
• /
• 2010

In this paper, the implementation of a human signal sensing module that has capabilities to check and restore the weak signals from the human body is presented. A module presented in this paper consists of processing and sensing elements related to human pulse and body temperature and a controller implemented with SoC design method. PPG data is detected by a noise filtering process toward the amplified signal which is from the operating frequency between 0.1Hz - 10Hz. A digital temperature sensor is used to check the body temperature. A sensor outputs the corresponding value of the electric voltage according to the body temperature. Moreover, this paper discusses the implementation of an enhanced microprocessor which is synthesized with VHDL as a part of the SoC development and used to control the entire module. The SoC processor is implemented on a Xilinx Spartan 3 XC3S1000 device and has the achieved operating frequency of 10MHz. The implemented SoC processor core is successfully tested with macro memories in FPGA and the experimental results are hereby shown.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.2
• /
• pp.154-162
• /
• 2007

In this paper, we propose a new AC-DC converter control method to comply with harmonics regulation(IEC 61000-3) effective for the inverter system of an air conditioner whose power consumption is less than 2,500W. There are many different ways of AC-DC converter control, but this paper focuses on the converter control method that is adopting an input reactor with low cost silicon steel core to strengthen cost competitiveness of the manufacturer. The proposed control method controls input current every half cycle of the line frequency to get unit power factor and at the same time to reduce switching loss of devices and acoustic noise from reactor. This kind of converter is known as a Partial Switching Converter(PSC). In this study, theoretical analysis of the PSC has been performed using Matlab/Simulink while a 16-bit micro-processor based converter has been used to perform the experimental analysis. In the theoretical analysis, electrical circuit models and equations of the PSC are derived and simulated. In the experiments, micro-processor controls input current to keep the power factor above 0.95 by reducing the phase difference between input voltage and current and at the same time to maintain a reference DC-link voltage against voltage drop which depends on DC-link load. Therefore it becomes possible to comply with harmonic regulations while the power factor is maximized by optimizing the time of current flow through the input reactor for every half cycle of line frequency.

• Journal of the Korea Society for Simulation
• /
• v.21 no.2
• /
• pp.31-39
• /
• 2012

Simulation Framework is a basic software tool used to develop simulation applications. This paper describes the development of a discrete event simulation framework based on DEVS(Discrete EVent System Specification) formalism, using MATLAB language which is widely used in technical computing and engineering disciplines. The newly developed framework utilizing MATLAB object oriented programming combines the convenience of MATLAB language and the sophisticated architecture of the DEVS formalism. Hence, it supports the productivity, flexibility, extensibility that are required for the simulation application software development of the weapon systems engagement. Moreover, it promises a simulation application the increased the computation speed proportional to the number of CPU of a multi-core processor, providing the batch simulation functionality based on MATLAB parallel computing technology.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.11
• /
• pp.31-38
• /
• 1998

This paper deals with CBS(Cycle Base Simulator) design of a 32 bit floating point DSP(Digital Signal Processor). The CBS has been developed for TMS320C30 compatible DSP and will be used to confirm the architecture, functions of sub-blocks, and control signals of the chip before the detailed logic design starts with VHDL. The outputs from CBS are used as important references at gate level design step because they give us control signals, output values of important blocks, values from internal buses and registers at each pipeline step, which are not available from the commercial simulator of DSP. In addition to core functions, it has various interfaces for efficient execution and convenient result display, CBS is verified through comparison with results from the commercial simulator for many application algorithms and its simulation speed is as fast as several tenth of that of logic simulation with VHDL. CBS in this work is for a specific DSP, but the concept may be applicable to other VLSI design.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.9
• /
• pp.1257-1263
• /
• 2018

Secure authentication technology is a fundamental building block for secure services for Internet of Things devices. Particularly, the multiplication operation is a core operation of public key cryptography, such as RSA, ECC, and SIDH. However, modern low-power processor, namely ARM Cortex-M3 processor, is not secure enough for practical usages, since it executes the multiplication operation in variable-time depending on the input length. When the execution is performed in variable-time, the attacker can extract the password from the measured timing. In order to resolve this issue, recent work presented constant-time solution for multiplication operation. However, the implementation still missed various speed-optimization techniques. In this paper, we analyze previous multiplication methods over ARM Cortex-M3 and provide optimized implementations to accelerate the speed-performance further. The proposed method successfully accelerates the execution-time by up-to 25.7% than previous works.

• The KIPS Transactions:PartD
• /
• v.13D no.3 s.106
• /
• pp.445-454
• /
• 2006

Almost of industrial measuring instruments usually are equipped only with serial communication devices. In order to connect these instruments to internet, we implement an embedded translator. This device has the hardware components composed of one WAN port, two LAN ports, and two UARTs, and functions as a communication translator between serial and internet communication. it also provides web-based monitoring function that is absent from existing serial-to-ethernet converter. The hardware is implemented using the KS8695 network processor which s an ARM922T as processor core. We have installed the boa web server and utilized the CGI function for internet-based remote control, added the IP sharing function which allows the network with private IP addresses to access the internet, and developed a serial-to-ethernet translation program. Finally, we show an application example of the developed translator that remotely monitors the solar energy production system.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.13 no.2
• /
• pp.13-25
• /
• 2017

Recently, the high performance of tactical situation display console and tactical data links are used to integrate the operational situations in accordance with information age and NCW (Network Centric Warfare). The tendency to maximize the efficiency of task execution has been developed by sharing information and the state of the battle quickly through complex and diverse information exchange. Tactical data link is a communication system that shares the platform with core components of weapons systems and battlefield situation between the command and control systems to perform a Network Centric Warfare and provides a wide range of tactical data required for decision-making and implementation.It provides the tactical information such as tactical information such as operational information, the identification of the peer, and the target location in real time or near real time in the battlefield situation, and it is operated for the exchange of mass tactical information between the intellectuals by providing common situation recognition and cooperation with joint operations. In this study, still image management, audio file management, tactical screen recording and playback using the storage and playback, NITF (National Imagery Transmission Format) message received from the displayer integrates the tactical situation in three dimensions according to multiple data link operation to suggest ways to ensure data integrity between the data link processor during the entire operation time.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.3
• /
• pp.419-426
• /
• 2021

A high-performance elliptic curve cryptography processor (HP-ECCP) was designed to support five field sizes of 192, 224, 256, 384 and 521 bits over GF(p) defined in NIST FIPS 186-2, and it provides eight modes of arithmetic operations including ECPSM, ECPA, ECPD, MA, MS, MM, MI and MD. In order to make the HP-ECCP resistant to side-channel attacks, a modified left-to-right binary algorithm was used, in which point addition and point doubling operations are uniformly performed regardless of the Hamming weight of private key used for ECPSM. In addition, Karatsuba-Ofman multiplication algorithm (KOMA), Lazy reduction and Nikhilam division algorithms were adopted for designing high-performance modular multiplier that is the core arithmetic block for elliptic curve point operations. The HP-ECCP synthesized using a 180-nm CMOS cell library occupied 620,846 gate equivalents with a clock frequency of 67 MHz, and it was evaluated that an ECPSM with a field size of 256 bits can be computed 2,200 times per second.