• Proceedings of the Korea Information Processing Society Conference
• /
• 2005.05a
• /
• pp.1071-1074
• /
• 2005

The ECC(Elliptic Curve Cryptogrphics), one of the representative Public Key encryption algorithms, is used in Digital Signature, Encryption, Decryption and Key exchange etc. The key operation of an Elliptic curve cryptosystem is a scalar multiplication, hence the design of a scalar multiplier is the core of this paper. Although an Integer operation is computed in infinite field, the scalar multiplication is computed in finite field through adding points on Elliptic curve. In this paper, we implemented scalar multiplier in Elliptic curve based on the finite field $GF(2^{163})$. And we verified it on the Embedded digital system using Xilinx FPGA connected to an EISC MCU(Agent 2000). If my design is made as a chip, the performance of scalar multiplier applied to Samsung $0.35\;{\mu}m$ Phantom Cell Library is expected to process at the rate of 8kbps and satisfy to make up an encryption processor for the Embedded digital information home system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.8
• /
• pp.2120-2130
• /
• 1998

This paper concerns a design of programmable MPEG decoder for video processing by object unit on network. The decoder can process video data effectively by a embedded controller with stack buffers for supporting OOP (Object-Oriented Programming). The controller offers extended instructions that process several data types including 32bit integer type. In addition to that, we have a vector processor, in this decoder that can execute advanced compensation and prediction by half pixel and SA(Shape Adaptive)-IDCT of MPEG-4. Absolutors and halfers in the vector processor make this architecture extensive to a encoder. We verified the decoder with $0.6\mu\textrm{m}$ 5-Volt CMOS COMPASS library.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.14 no.1
• /
• pp.51-61
• /
• 2019

There are strict evaluation processes before using new processors to satellites. Engineers evaluate processors from various viewpoints including specification, development environment, and cost. From a viewpoint of computation power, manufacturers provide benchmark results with processors, and engineers decide which processors are adequate to their satellites by comparing the benchmark results with requirements of their satellites. However, the benchmark results depends on a test environment of manufacturers, and it is quite difficult to achieve similar performance in a target environment. Therefore, it is necessary to evaluate the processors in the target environment. This paper compares performance of a processor, AT697F/LEON2, in software testbed (STB) with three development boards of XC2V/LEON3, GR712RC/LEON3, and GR740/LEON4. Seven benchmark functions of Dhrystone, Stanford, Coremark, Whetstone, Flops, NBench, and MiBench are selected. Results are analyzed with hardware and software properties: hardware properties of core architecture, number of cores, cache, and memory; and software properties of build options and compilers. Based on the analysis, this paper describes a guideline for choosing processors for next generation satellites.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.6
• /
• pp.1069-1076
• /
• 2019

With the development of information and communication technology, the military's battle environment is changing greatly to network centric warfare in where weapon system is connected in a network and carries out mission by exchanging the real-time data. The core of the network centric warfare is Tactical Data Link(TDL) system, and subscribers of TDL exchange tactical information in real time through wireline, wireless and satellite network to share the battlefield situation. The amount of data sent and received through TDL inevitably increase as military's weapon systems equipped with TDL systems increase over time and the performance of communications equipment improves. This study proposes ways to improve the transmission speed and processing capacity of the TDL system by improving the Data Link Processor.

• Journal of Computing Science and Engineering
• /
• v.7 no.4
• /
• pp.285-299
• /
• 2013

To enable hard real-time systems to take advantage of multicore processors, it is crucial to obtain the worst-case execution time (WCET) for programs running on multicore processors. However, this is challenging and complicated due to the inter-thread interferences from the shared resources in a multicore processor. Recent research used the combined cache conflict graph (CCCG) to model and compute the worst-case inter-thread interferences on a shared L2 cache in a multicore processor, which is called the CCCG-based approach in this paper. Although it can compute the WCET safely and accurately, its computational complexity is exponential and prohibitive for a large number of cores. In this paper, we propose three counter-based approaches to significantly reduce the complexity of the multicore WCET analysis, while achieving absolute safety with tightness close to the CCCG-based approach. The basic counter-based approach simply counts the worst-case number of cache line blocks mapped to a cache set of a shared L2 cache from all the concurrent threads, and compares it with the associativity of the cache set to compute the worst-case cache behavior. The enhanced counter-based approach uses techniques to enhance the accuracy of calculating the counters. The hybrid counter-based approach combines the enhanced counter-based approach and the CCCG-based approach to further improve the tightness of analysis without significantly increasing the complexity. Our experiments on a 4-core processor indicate that the enhanced counter-based approach overestimates the WCET by 14% on average compared to the CCCG-based approach, while its averaged running time is less than 1/380 that of the CCCG-based approach. The hybrid approach reduces the overestimation to only 2.65%, while its running time is less than 1/150 that of the CCCG-based approach on average.

• The KIPS Transactions:PartA
• /
• v.10A no.4
• /
• pp.389-396
• /
• 2003

InfiniBand technology is being accepted as the future system interconnect to serve as the high-end enterprise fabric for cluster computing. This paper presents the design and implementation of the InfiniBand system interconnect, focusing on an InfiniBand host channel adapter (HCA) based on dual ARM9 processor cores The HCA is an SoC tailed KinCA which connects a host node onto the InfiniBand network both in hardware and in software. Since the ARM9 processor core does not provide necessary features for multiprocessor configuration, novel inter-processor communication and interrupt mechanisms between the two processors were designed and embedded within the KinCA chip. Kinch was fabricated as a 564-pin enhanced BGA (Bail Grid Array) device using 0.18${\mu}{\textrm}{m}$ CMOS technology Mounted on host nodes, it provides 10 Gbps outbound and inbound channels for transmit and receive, respectively, resulting in a high-performance cluster system.

• KIPS Transactions on Computer and Communication Systems
• /
• v.6 no.12
• /
• pp.469-478
• /
• 2017

The mutual exclusion is originally based on the theory of race condition prevention in symmetric multi-processor operating systems. But recently, due to the generalization of multi-core processors, its application range has been rapidly shifted to parallel processing application domain. POSIX thread, WIN32 thread, and Java thread, which are typical parallel processing application development environments, provide a unique mutual exclusion mechanism for each of them. Applications that are very sensitive to performance in these environments may want to reduce the burden of mutual exclusion, even at some cost, such as inconvenience of coding. In this study, we implement Dekker's and Peterson's algorithm in the form of busy-wait and processor-yield in various platforms, and compare the performance of them with the built-in mutual exclusion mechanisms to evaluate the usability of the classic algorithms. The analysis result shows that Dekker's algorithm of processor-yield type is superior to the built-in mechanisms in POSIX and WIN32 thread environments at least 2 times and up to 70 times, and confirms that the practicality of the algorithm is sufficient.

• Journal of the Institute of Convergence Signal Processing
• /
• v.13 no.2
• /
• pp.83-90
• /
• 2012

In this paper, an intelligent visual surveillance system based on a NIOS II embedded platform is implemented. By this time, embedded based visual surveillance systems were restricted for a special purpose because of high dependence upon hardware. In order to improve the restriction, we implement a flexible embedded platform, which is available for various purpose of applications. For high speed processing of software based programming, we improved performance of the system which is integrated the SOPC type of NIOS II embedded processor and image processing algorithms by using software programming and C2H(The Altera NIOS II C-To-Hardware(C2H) Acceleration Compiler) compiler in the core of the hardware platform. Then, we constructed a server system which globally manage some devices by the NIOS II embedded processor platform, and included the control function on networks to increase efficiency for user. We tested and evaluated our system at the designated region for visual surveillance.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.4
• /
• pp.766-771
• /
• 2008

As the practical range of SAW Device extended into various fields including physical sensor, chemical sensor and ID Tag, the platform for various SAW Devices is required more than ever. While SAW ID or Sensors advanced remarkably, the development of platform which applies to SAW Sensor left much to be desired. Therefore this paper represents the SAW platform in order to use SAW ID such as ID Tag or Sensors more conveniently. The SAW platform consists of a RF module which can recognize SAW ID and a main module which has a hish performance processor in order to process the response signal of SAW ID. The main module which has a high performance processor is designed by GUI environmental type to ensure that users are able to use the platform more easily. In this paper, the SAW platform, which is based on ARM9 core processor, used Windows Embedded CE 6.0 OS which brings friendly interface to users. Also the developers can make less effort to design various applications with sensors.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.4
• /
• pp.548-555
• /
• 2022

This paper describes the hardware implementation of elliptic curve cryptography (ECC) used as a core operation in elliptic curve digital signature algorithm (ECDSA). The ECC processor supports eight operation modes (four point operations, four modular operations) on the NIST P-521 curve. In order to minimize computation complexity required for point scalar multiplication (PSM), the radix-4 Booth encoding scheme and modified Jacobian coordinate system were adopted, which was based on the complexity analysis for five PSM algorithms and four different coordinate systems. Modular multiplication was implemented using a modified 3-Way Toom-Cook multiplication and a modified fast reduction algorithm. The ECC processor was implemented on xczu7ev FPGA device to verify hardware operation. Hardware resources of 101,921 LUTs, 18,357 flip-flops and 101 DSP blocks were used, and it was evaluated that about 370 PSM operations per second were achieved at a maximum operation clock frequency of 45 MHz.