• 한국정보처리학회논문지
• /
• 제2권3호
• /
• pp.417-424
• /
• 1995

본 논문에서는 정량화(Quantification) 문제를 MFT(Mean Field Theroy)를 통해서 해결하는 기법을 제안한다. 통계학에서 중요한 문제의 하나인 정량화 문제는 주어진 공간에서 대상들간의 유사성에 따라서 최적의 상태를 갖도록 하는 문제이다. 평균장 접근 방법에 기초한 한개의 변수로 표현되는 확률적 시뮬레이티드 아닐링을 제안하고 정량화 문제를 패널티(penalty) 파라메타 항을 첨가한 비한정된 최적화 문제로 변형하 여 MFT를 적용하였다. 또한 연속변수를 갖는 신경회로망에서 실제 값을 계산하는 것 보다 평균장 접근방법으로 계산하는것이 더 빠르게 계산될 수 있음을 확인하였다. 본 논문에서 제안한 방법이 실험결과 해석적인 방법보다 좋은 정량적 결과를 보였다.

• 소성∙가공
• /
• 제32권6호
• /
• pp.352-359
• /
• 2023

Recently, independent suspension systems have been applied not only to passenger cars but also to large commercial vehicles. Therefore, the need for research to domestically produce such independent suspensions for large commercial vehicles is gradually increasing. In this paper, we conducted research on the manufacturing technology of the relay lever, which are integral components of independent suspension systems for large commercial vehicles. Our goal was to reduce the flash volume generated during the forging process. The shape variables of the initial billet were adjusted to find proper forming conditions that could minimize flash volume while performing product forming smoothly. Shape variables were set as input variables and the flash volume was set as an output variable, and simulations were carried out to analytically predict the volume of the flash area for each variable condition. Based on the data obtained through numerical simulations, a regression model and an artificial neural network model were used to develop a prediction model that can easily predict the flash volume for variable conditions. For the corresponding prediction model, a goodness of-fit test was performed to confirm a high level of fit. By comparing and analyzing the two prediction models, the high level of fit of the ANN model was confirmed.

• 한국수산과학회지
• /
• 제53권3호
• /
• pp.368-381
• /
• 2020

This study was conducted to optimize the processing conditions of seasoned laver Pyropia yezoensis with conger eel Conger myriaster seasoning sauce (CES) using response surface methodology (RSM). The RSM program results for bonesoftness showed that the optimum independent variables based on the dependent variables (Y₁, lipid removal rate; Y₂, texture; and Y₃, sensory fish odor score) were 431.0% for X₁ (water amount), 115.6℃ for X₂ (retort-operated temperature), and 50.1 min for X₃ (retort-operated time). The RSM program results for the CES blend showed that the optimum independent variables (X₁, amount of bone-softened conger eel by-products; X₂, mixed sauce amount; and X₃, starch amount) based on the dependent variables (Y₁, amino-N; Y₂, Hunter redness; and Y₃, drying time) were 44.8% for A (pre-treated conger eel by-product), 36.0% for B (mixed sauce), and 19.2% for C (starch). The RSM program results for seasoned laver with CES showed that the optimum independent variables based on the dependent variables (Y₁, water activity; Y₂, Hunter yellowness; and Y₃, overall acceptance) were 5.0% for X₁, (CES amount), 313.8℃ for X₂ (roasting temperature), and 6.0 s for X₃ (roasting time). The seasoned laver with CES prepared under the optimum conditions was superior to commercial seasoned laver in terms of overall acceptance.

• 한국환경보건학회지
• /
• 제24권3호
• /
• pp.87-91
• /
• 1998

The removal effect of phosphate by sludge from wastewaters prior to discharge into natural waters is an essential measure to prevent eutrophication in receiving waters. There is need for developing low cost, easily and abundantly available, efficient adsorbents for the removal of phosphorus (P as orthophosphate) during the tertiary treatment of wastewaters. The adsorbent carbon which is prepared with fisheries wastes on a laboratory scale has been used to evaluate its performance for phosphate adsorption. Phosphate removal increase with increasing adsorbent dose and temperature, but shows no changes at an adsorbent dose over 8 g/l.

• 한국분말재료학회지
• /
• 제6권3호
• /
• pp.238-245
• /
• 1999

The preparation of $n-TiO_2$ powder by the Chemical Vapor Synthesis process (CVS) was studied using the liquid metal organic precursor (TTIP). The residence time and the collection methods were considered as main processing variables through the experiments. The CVS equipment consisted of a micropump and a flashvaporizer, a tube furnace and a tubular collection device. The synthesis was performed at $1000^{\circ}C$ with various sets of collection zone. The residence time and the total system pressure were controlled in the range of 3~20 ms and 10 mbar, respectively. Nitrogen adsorption, X-ray diffraction and electron microscopy were used to determine particle size, specific surface area and crystallographic structure. The grain size of the as-prepared $n-TiO_2$ powder was in the range of 2~8 nm for all synthesis parameters and the powder exhibited only little agglomeration. The relationship between particle characteristics and the processing variables is reviewed based on simple growth model.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.818-821
• /
• 2003

Sn-doped $In_{2}O_{3}$ (ITO) thin film is one of the materials widely on research not only in the academic fields but also in industrial fields because of their transparency, high conductivity and good adhesion characteristics on substrate. ITO thin films are usually preferred oriented to one of the (222), (400), and (440) planes during crystallization process, which is dependent on processing variables. The preferred orientation affects electrical, optical and etching properties of the films. In this study, thin films of preferred oriented in different orientation were fabricated by controlling processing variables. The crystallization behavior, grain size, surface roughness, transparency and electrical properties of the thin films in different orientation were examined.

• 한국세라믹학회지
• /
• 제29권3호
• /
• pp.241-251
• /
• 1992

The effects of slip composition and processing conditions on the fabrication of ceramic heat exchanger cores by doctor blade process were investigated. Since the effects of those two variables were inter-dependent, the effects of binder system, binder plus plasticizer, were extensively studied for a limited range of processing conditions and a pre-determined ceramic composition. The content of binder system and the ratio of binder to plasticizer were identified as main variables to affect densities and mechanical properties of green sheets, compressive properties and bond strengths of laminates, and shrinkages and their anisotropy of sintered laminates. However, sintered densities and water absorptions of laminates were not influenced by either the content of binder system or the ratio of binder to plasticizer, when the debinded laminates had a relatively high density (relative density of >55% in this study).

• ETRI Journal
• /
• 제21권4호
• /
• pp.83-93
• /
• 1999

This paper examines the correlations between user characteristics and their perferences for two selected features of Web-based OPAC systems. User characteristics identified in this study were age, gender, educational status, computer skills and OPAC experience. Usability features included interaction styles, character and image on screen, browsing and navigating style, screen layout, and ease of learning, whereas availability features attended to availability of information, quality of information and up-to-date information. Individual variables and features are described, and the correlation between the variables and the features are explored using Pearson's correlation coefficient(r). Although based on a small-scale sample survey, a considerably large number of statistically significant correlations were found between the users' characteristics and the selected evaluation features of interactive Web-based OPACs. From these observations, it seems to be suitable to recommend that system designers should make a more considered appraisal of the users' demographic characteristics in the design of the new generation of OPAC such as in user-tailored interactive Web-based OPAC systems.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.43-44
• /
• 2005

SU-8 is a epoxy based photoresist designed for MEMS applications, where a thick, chemically and thermally stable image is desired. But SU-8 has proven to be very sensitive to variation in processing variables and hence difficult to use in the fabrication of useful structures. In this paper, negative SU-8 photoresist processed has been characterized in terms of delamination. Based on a full factorial designed experiment. Employing the design of experiment (DOE), a process parameter is established, and analyzing of full factional design is generated to investigate degree of delamination associated with three process parameters: post exposure bake (PEB) temperature, PEB time, and exposure energy. These results identify acceptable ranges of the three process variables to avoid delamination of SU-8 film, which in turn might lead to potential defects in MEMS device fabrication.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.153-156
• /
• 2006

The vibration isolation system is a system that attenuates the vibration transmitted from surroundings by using external energy supply like electricity and feedback and/or feedforward functions. Such a system needs stiff structure to make precise positioning without ripple within a certain bandwidth. So, a horizontal and rotary arrangement of the actuation module is suggested by using lever linkage. Modeling and kinematic formulation are completed and system identification is accomplished to tune the design variables accurately. The vibration isolation control is performed by mu-synthesis with the uncertainties in design variables. Low frequency signal enhancement circuit and saturation proof integration algorithm are devised to use seismic sensors for displacement control. This overall system shows good disturbance rejection performance.