• Proceedings of the IEEK Conference
• /
• 2002.07a
• /
• pp.297-300
• /
• 2002

In this paper, we propose a post-processing method to reduce the blocking artifacts. We perform the post-processing only in the spatial domain so that it is readily applicable to real-time video decoder. Many approaches proposed so far for deblocking deal with only The luminance signal. but here we propose processing the chrominance signals as well since the low bit rare application where the blocking artifacts are most problematic suffers significantly from the color misalignment caused by blocking artifacts occurring to chrominance data as well. The proposed method is composed of low pass filtering in two steps considering the edge direction. The first step is the IIR low pass filtering in the diagonal direction, and the second step is another IIR low pass filtering in horizontal and vertical directions.

• Journal of Information Processing Systems
• /
• v.15 no.6
• /
• pp.1378-1391
• /
• 2019

In recent years, automatic document summarization has been widely studied in the field of natural language processing thanks to the remarkable developments made using deep learning models. To decode a word, existing models for abstractive summarization usually represent the context of a document using the weighted hidden states of each input word when they decode it. Because the weights change at each decoding step, these weights reflect only the local context of a document. Therefore, it is difficult to generate a summary that reflects the overall context of a document. To solve this problem, we introduce the notion of a general context and propose a model for summarization based on it. The general context reflects overall context of the document that is independent of each decoding step. Experimental results using the CNN/Daily Mail dataset show that the proposed model outperforms existing models.

• Speech Sciences
• /
• v.5 no.1
• /
• pp.89-103
• /
• 1999

It is relatively easy to develop a prototype of a Korean language processing system, but it is very difficult to make it an operational system. In this paper, we survey the current status and methodological issues of the Korean language processing systems such as morphological analyzer, parser and machine translator. In most cases, Korean language processing system easily comes to a dead-end state where its performance can not be improved any more. The reason is that it adopts a general algorithm covering similar problems as a whole because specific low-level problems are not clearly defined and their algorithms are unclear. So, when we add some restrictions to solve an individual linguistic problem, they are also applied to other linguistic phenomena as a side effect. It causes a critical problem that the improvement of the algorithm is very difficult. This paper proposes a 2-step paradigm, a divide-and-conquer method by the functional modularization, a simplification method, and an exception handling technique to develop an operational system that does not fall into a dead-end state.

• Korean Journal of Computational Design and Engineering
• /
• v.7 no.3
• /
• pp.170-176
• /
• 2002

To exchange CAD data between heterogeneous CAD systems, we generally use a neutral format especially STEP, which is the international standard (ISO-10303) for product model data exchange. AP214 (Application Protocol) for the automotive industry not only takes into account geometry and organizational data, but also provides a classification mechanism for product modeling. When reading a STEP file during a design process that is exported from other CAD systems, it is a burden to a designer to go through the tedious process of removing duplicate or non-manifold entities, adjusting parts, and rearranging text. We analyze the structure of AP214 and develop a healing tool to solve the following problem. Without the assembly information in the Master workspace of CATIA, or to read a STEP file from Pro/Engineer, a designer should do a repetitive process of disintegrating an assembly into parts one by one. We have developed a post-processing tool for STEP AP214 that separates out a part from an assembly model and adjusts superfluous or useless entities using the ACIS kernel.

• Transactions of Materials Processing
• /
• v.12 no.5
• /
• pp.449-456
• /
• 2003

Multi-step induction heating process was applied to the powder compact melting technique as a new heating process to achieve pinpoint accuracy, faster cycle time, repeatability, non-contact and energy-efficient heat in a minimal amount of time. The objective of this study is the establishment of the input data diagram of multi step induction heating process for automation of the fabrication process of 6061 Al foams with desired density. At first, proper induction coil was designed to obtain a uniform temperature distribution over the entire cross sectional area of specimen. By using this coil, foaming experiments were performed to investigate the multi-step induction heating conditions such as capacity, temperature and time conditions of each heating and holding step. On the basis of the obtained multi-step induction heating conditions, relationship between final heating temperature and fraction of porosity was investigated.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.1
• /
• pp.252-265
• /
• 2000

In this thesis, the analysis of data processing method and the amount of computation in the whole geometry processing is conducted step by step. Floating-point ALU design is based on the characteristics of geometry processing operation. The performance of the devised ALU fitting with the geometry processing operation is analyzed by simulation after the description of the proposed ALU and geometry processor. The ALU designed in the paper can perform three types of floating-point operation simultaneously-addition/subtraction, multiplication, division. As a result, the 23.5% of improvement is achieved by that floating-point ALU for the whole geometry processing and in the floating-point division and square root operation, there is another 23% of performance gain with adding area-performance efficient SRT divisor.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.5
• /
• pp.74-86
• /
• 2002

This paper proposes a VLSI architecture for high-speed data processing of the differential phase detectors with the decision feedback. To improve the BER performance of the conventional differential phase detection, DF-DPD, DPD-RGPR and DFDPD-SA have been proposed. These detection methods have the architecture feedbacking the detected phase to reduce the noise of the previous symbol as phase reference. However, the feedback of the detected phase results in lower data processing speed than that of the conventional differential phase detection. In this paper, the VLSI architecture was proposed for high-speed data processing of the differential phase detectors with decision feedback. The Proposed architecture has the pre-calculation method to previously calculate the results on 'N'th step at 'M-1'th step and the pre-decision feedback method to previously feedback the predicted phases at 'M-1'th step. The architecture proposed in this paper was implemented to RTL using VHDL. The simulation results show that the Proposed architecture obtains the high-speed data processing.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.8 no.4
• /
• pp.159-165
• /
• 2012

The accurate focusing position should be determined for accurate measurements In VMS. Camera lens focusing is an important problem in computer vision and video measuring systems (VMS) that use CCD cameras and high precision XYZ stages. Camera focusing is a very important step in high precision measurement systems that use computer vision technique. The auto focusing process consists of two steps, the focus value measurement step and the exact focusing position determination step. It is suitable for eliminating high frequency noises with lower processing time and without blurring. An automatic focusing technique is applied to measure a crater with a one-dimensional search algorithm for finding the best focus. Throughout this paper, the suggested algorithm for the Auto focusing was combined with the learning. As a result, it is expected that such a combination would be expanded into the system of recognizing voices in a noisy environment.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2014.11a
• /
• pp.879-881
• /
• 2014

A method is proposed to achieve improved number plate detection for mobile devices by applying a two-step convolutional neural network (CNN) approach. Supervised CNN-verified car detection is processed first. In the second step, we apply the detected car regions to the second CNN-verifier for number plate detection. Since mobile devices are limited in computing power, we propose a fast method to detect number plates. We expect to use in the field of intelligent transportation systems (ITS).

• Journal of Information Processing Systems
• /
• v.18 no.2
• /
• pp.173-187
• /
• 2022

A special government agency has been charged with implementing quality management to guarantee the quality of wild-simulated ginseng. However, these processes are carried out by use of documents, and this has resulted in information omission and high document management costs. To solve this problem, this study analyzed the existing quality management process by using a smart contract for the existing offline form and proposed a new quality management system for storing and managing all log data in the blockchain. This system reduced documentation management costs about quality management and recorded information in the previous step through the quality management steps, thus forming a step-by-step record chain. Experiments were conducted by implementing this system, which improved data integrity and reliability. Additionally, sensitive information, such as personal information, was included in the system by use of the off-chain technology.