• IEIE Transactions on Smart Processing and Computing
• /
• v.5 no.1
• /
• pp.5-9
• /
• 2016

The modulation bandwidth of a reflective semiconductor optical amplifier (RSOA) is limited by carrier lifetime. Therefore, it is hard to directly modulate an RSOA with high-speed electrical signals. We theorize that an optical filter can act as an optical equalizer, compensating for the narrow bandwidth limitation imposed by the RSOA. By modeling a time-varying RSOA with a modified transfer matrix method (TMM), we simulated 25 Gbps operation of an RSOA with optical filtering effects. We investigated the impact of detuning the center wavelength of the optical filter on the modulation of an RSOA. The numerical results show that it is possible to modulate an RSOA with an optical filtering effect at 25 Gbps without electronic equalization or digital signal processing.

• Laser Solutions
• /
• v.8 no.3
• /
• pp.21-26
• /
• 2005

A bonding process between tape-carrier package and a glass panel with anisotropic conductive film (ACF) has been investigated by making use of high power diode laser as a heat source for cure. The results from modeling of process and from optical properties of layers showed that heat absorbed from polyimide film surface and ACF layer is dominant source of curing during laser illumination. Laser ACF bonding has better bonding quality than conventional bonding in view of peel strength, flatness, pressure unbalance and processing time. New ACF bonding processes by making use of high power diode laser are proposed.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.20 no.4
• /
• pp.39-44
• /
• 2012

This paper propose a transmission method for "Transportation system" that can decide precise position under wide area road traffic environment. For precise position detecting, central station collect multiple receiver station's satellite navigation data and generate correction information. In this process, we need efficient real time transmission method for satellite navigation message that has variable data size. We propose real time data transmission method. This real time transmission method offer efficient processing structure for multiple receiver station's satellite navigation message. This paper explains proposed real time transmission method and proofs this transmission method.

• Journal of Information Processing Systems
• /
• v.2 no.3 s.4
• /
• pp.163-169
• /
• 2006

So far, little research has been conducted into developing a QAPM (Quality Assurance Process Model) for telecommunications applications on the basis of TMN. This is the first trial of the design of TMN-based QAPM on fault management with UML. A key attribute of the QAPM is that it can easily identify current deficiencies in a legacy system on the basis of TMN architecture. Using an empirical comparison with the legacy systems of a common carrier validates the QAPM as the framework for a future mode of the operation process. The results indicate that this paper can be used to build ERP(Enterprise Resource Planning) for a telecommunications fault management solution that is one of the network management application building blocks. The future work of this paper will involve applying the QAPM to build ERP for RTE (Real Time Enterprise) fault management solution and more research on ERP design will be necessary to accomplish software reuse.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1107-1110
• /
• 2006

We investigate the effect of processing temperature of gate insulator and optical anisotropy on organic thin-film transistors (OTFTs). The insulator film which was processed lower temperature than solvent boiling temperature can lead more aligned pentacne molecules compare to higher processed insulator film. It finally gives rise to the big increase of carrier mobility in OTFTs, although there are little difference at the seriously affecting properties to device performance, for example roughness of gate insulator film.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.3
• /
• pp.124-133
• /
• 1995

A theoretical self-consistent thermoelectric model has been developed for optimal thermal design in the self-signal processing infraed detectors. The model is achived by employing the coupled thermoelectric equation which allows which allows the simultaneous investigation of the termal and electrical aspects of device behavior. The thermal limitation of detectivity and responsivity are determined by the enegy gap, carrier concentration, lifetime, and mobility as a function of the temperature. The calculated results indicate that the detectivity is decreased at bias fields above about 50 V/cm, because the performence is limiting by temperature when the bias voltage reached the level associated with Joule heating. It has been also found that the improvement in the mid-band modulation transfer function(MTF) may be restricted by increasing the bias fields. Further, the important paramerers in the thermal optimization of SPIR detector, such as temperature in the device, ambipolar velocity, element thickness and length, are also considered. The analytical study provides a mathematical basis for optimal design of such a photoconductive IR detector and the agreement between the experimental and theoretical results are seen to be good.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2003.11b
• /
• pp.1041-1044
• /
• 2003

현재의 이동통신에서는 다양한 영상 서비스를 제공해야 하는데, 이는 여러 종류의 고품질 데이터를 전송해야 함을 의미하며, 이를 위해 4 세대 광대역 이동통신을 위한 변조방식중의 하나로 OFDM(Orthogonal Frequency Division Multiplexing) 변조방식이 연구되고 있다. 본 논문에서는 OFDM의 각 직교 부반송파(Sub-carrier)들이 잠재적으로 다른 변조방식을 가질 수 있다는 특징에 single modulation(OFDM과 QPSK, OFDM과 16QAM), multi-modulation(OFDM과 (QPSK+16QAM))을 결합하여 시뮬레이션을 통해 성능을 비교하였고 실제 이미지를 전송하여 전송효과를 확인하였으며, 전송하고자 하는 데이터 종류와 채널환경에 따른 다중변복조 방식을 제안 분석하였다.

• Journal of Information Processing Systems
• /
• v.9 no.3
• /
• pp.499-510
• /
• 2013

Hardware-Software co-simulation of a multiple image encryption technique shall be described in this paper. Our proposed multiple image encryption technique is based on the Latin Square Image Cipher (LSIC). First, a carrier image that is based on the Latin Square is generated by using 256-bits of length key. The XOR operation is applied between an input image and the Latin Square Image to generate an encrypted image. Then, the XOR operation is applied between the encrypted image and the second input image to encrypt the second image. This process is continues until the nth input image is encrypted. We achieved hardware co-simulation of the proposed multiple image encryption technique by using the Xilinx System Generator (XSG). This encryption technique is modeled using Simulink and XSG Block set and synthesized onto Virtex 2 pro FPGA device. We validated our proposed technique by using the hardware software co-simulation method.

• Journal of Information Processing Systems
• /
• v.16 no.5
• /
• pp.1048-1063
• /
• 2020

In this study, we propose a reinforcement learning agent to control the data transmission rates of nodes in carrier sensing multiple access with collision avoidance (CSMA/CA)-based wireless networks. We design a reinforcement learning (RL) agent, based on Q-learning. The agent learns the environment using the timeout events of packets, which are locally available in data sending nodes. The agent selects actions to control the data transmission rates of nodes that adjust the modulation and coding scheme (MCS) levels of the data packets to utilize the available bandwidth in dynamically changing channel conditions effectively. We use the ns3-gym framework to simulate RL and investigate the effects of the parameters of Q-learning on the performance of the RL agent. The simulation results indicate that the proposed RL agent adequately adjusts the MCS levels according to the changes in the network, and achieves a high throughput comparable to those of the existing data transmission rate adaptation schemes such as Minstrel.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2001.06a
• /
• pp.33-36
• /
• 2001

In MC-CDMA systems effects of delay spread of the channel are reduced with increased symbol duration by simultaneously transmitting data symbols on the parallel subcarriers. However, the increased symbol duration causes the system to be more vulnerable to time selective fading. In this paper, we investigate the effects of time selective fading characteristics of the mobile channel from the viewpoint of desired signal power to inter-carrier interference power ratio at the combiner output of the MC-CDMA receiver.