• 한국결정성장학회지
• /
• 제8권2호
• /
• pp.350-355
• /
• 1998

Ethylene glycol을 polymeric carrier로 사용한 새로운 화학적 세라믹 분말 제조 공정에 의하여 $(Dy_2TiO_5)$ 분말을 제조하였다. Chelation 공정의 생략에도 불구하고, 고순도의 미세한 입자를 갖는 세라믹 분말 제조가 가능함을 확인하였다. 열분석, 미세구조분석, 회절분석 등으로 분말특성을 평가하였다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제8권4호
• /
• pp.311-317
• /
• 2008

The measurement of dark ${\sigma}_D$, gamma-induced ${\sigma}_{\gamma}$ conductivities and the expected conductivity modulation ${\Delta}_{\sigma}$ in silicon wafers/samples is studied for developing a new technique for carrier lifetime evaluation. In this paper a simple method is introduced to find the carrier lifetime variations with the measured conductivity and conductivity modulation under dark and gamma irradiation conditions. It will be concluded that this simple method enables us to give an improved wafer evaluation, processing and quality control in the field of photovoltaic materials and other electronic devices.

• 한국통신학회논문지
• /
• 제39C권5호
• /
• pp.413-417
• /
• 2014

코히어런트 초고속 광전송 링크에서는 성능을 열화시키는 잡음요소를 제거하는 것이 더욱 중요하게 대두되고 있다. 그 중 위상잡음과 주파수 오프셋은 위상문제를 일으키는 잡음으로, 신호 처리를 방해하는데 가장 주요한 요인이다. 본 논문에서는 디지털 신호처리 방법을 이용하여 위상잡음과 주파수 오프셋을 보상하는 방법을 제안하였으며 시뮬레이션을 통해 타당성을 검증하였다. 제안된 알고리즘은 기존의 보상 방법들보다 계산 복잡도를 낮추어, 신호 처리속도가 중요한 초고속 코히어런트 광전송 시스템에 있어서 수신기의 신호처리 부담을 완화하였다.

• 정보처리학회지
• /
• 제11권4호
• /
• pp.89-92
• /
• 2004

Business organizations today enjoy unprecedented connectivity over the Internet that directly affects their bottom line and their top line. Connectivity increases productivity and reduces cost of operations. It eliminates barriers resulting from distance and integrates the world. Nevertheless, businesses today face a challenging trade-off between securing their corporate assets and leveraging this ubiquitous connectivity to improve their operations. (omitted)

• Smart Structures and Systems
• /
• 제24권6호
• /
• pp.803-812
• /
• 2019

Triplex composite is an epoxy-bonded joint structure, which constitutes the secondary barrier in a liquefied natural gas (LNG) carrier. Defects in the triplex composite weaken its shear strength and may cause leakage of the LNG, thus compromising the structural integrity of the LNG carrier. This paper proposes an autonomous triplex composite inspection (ATCI) system for visualizing and classifying hidden defects in the triplex composite installed inside an LNG carrier. First, heat energy is generated on the surface of the triplex composite using halogen lamps, and the corresponding heat response is measured by an infrared (IR) camera. Next, the region of interest (ROI) is traced and noise components are removed to minimize false indications of defects. After a defect is identified, it is classified as internal void or uncured adhesive and its size and shape are quantified and visualized, respectively. The proposed ATCI system allows the fully automated and contactless detection, classification, and quantification of hidden defects inside the triplex composite. The effectiveness of the proposed ATCI system is validated using the data obtained from actual triplex composite installed in an LNG carrier membrane system.

• 한국항공우주학회지
• /
• 제33권7호
• /
• pp.59-69
• /
• 2005

본 논문에서는 위상평활화코드 기법에 기반한 실시간 동적 차분위성항법의 효율적인 구현을 위하여 위치영역 Hatch 필터를 새로이 제안하고 그 성능을 분석하였다. 제안된 위치영역 Hatch 필터는 기존의 거리영역 Hatch를 새로운 각도에서 해석하고 이를 연장하여 유도되었다. 시뮬레이션을 통하여 Hatch 이득이 Kalman 형 이득보다 더 효율적이며 또한 위성의 출몰이 빈번한 환경에서는 위치영역 Hatch 필터가 거리영역 Hatch 필터보다 유리함을 보였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.203-206
• /
• 2001

This paper presents a straightness measurement system for flat and long workpieces. The measurement system consists of a laser optical unit, a CCD camera and processing system, and a carrier system with a stylus. The carrier system accompanies the stylus, which displaces a retroreflector along the surface profile. The optical unit is used to optically amplify the displacement of retroreflector. The CCD camera and processing system finally identifies the vertical displacement of the stylus unit. The developed system is applied to two surfaces: ground surface and LM guide surface. The experimental results show that the developed system can measure the straightness of flat surfaces within sub-micron error.

• 디지털산업정보학회논문지
• /
• 제16권1호
• /
• pp.93-98
• /
• 2020

Research on underwater sensor networks is increasing due to such reasons as marine resource management, maritime disaster prediction and military protection. Many underwater sensor networks performs wireless communication using an acoustic sound wave band signal having a relatively low frequency. So the digital part of their modem can take charge of carrier band signal processing. To enable this, the sampling rate of the baseband band signal should be increased to a sampling rate at which carrier band signal processing is possible. In this paper, we designed a sampling rate increasing circuit based on a CIC interpolator for underwater sensor nodes. The CIC interpolator has a simple circuit structure. However, since the CIC interpolator has a large attenuation of the pass band and a wide transition band, an inverse sinc LPF is added to compensate for frequency response of the CIC interpolator. The proposed interpolator was verified in time domain and frequency domain using ModelSim and Matlab.

• Journal of Information Processing Systems
• /
• 제11권3호
• /
• pp.342-353
• /
• 2015

It is widely accepted that single carrier frequency division multiple access (SC-FDMA) is an excellent candidate for broadband wireless systems. Channel estimation is one of the key challenges in SC-FDMA, since accurate channel estimation can significantly improve equalization at the receiver and, consequently, enhance the communication performances. In this paper, we study the application of compressive sensing for sparse channel estimation in a SC-FDMA system. By skillfully designing pilots, their patterns, and taking advantages of the sparsity of the channel impulse response, the proposed system realizes channel estimation at a low cost. Simulation results show that it can achieve significantly improved performance in a frequency selective fading sparse channel with fewer pilots.

• Journal of Information Processing Systems
• /
• 제10권2호
• /
• pp.163-175
• /
• 2014

This paper will focus on improving the performance of orthogonal frequency division multiplexing (OFDM) in Rayleigh fading environments. The proposed technique will use a previously published method that has been shown to improve OFDM performance in independent fading, based on ordered sub-carrier selection. Then, a simple non-iterative method for finding the optimal bit-loading allocation was proposed. It was also based on ordered sub-carrier selection. We compared both of these algorithms to an optimal bit-loading solution to determine their effectiveness in a correlated fading environment. The correlated fading was simulated using the JTC channel models. Our intent was not to create an optimal solution, but to create a low complexity solution that can be used in a wireless environment in which the channel conditions change rapidly and that require a simple algorithm for fast bit loading.