• 한국군사과학기술학회지
• /
• 제6권1호
• /
• pp.49-58
• /
• 2003

Compared with generic GPS receiver, post-processing software GPS receiver has many advantages for high dynamic vehicle tracking. It has the advantage of the application of various tracking algorithms and aiding schemes. The post-processing system observes the carrier phase measurement data from the recorded GPS signals, detects and isolates the cycle slip. The observed carrier phase data and the raw data of the reference station are processed by carrier phase DGPS scheme. And the integer ambiguity resolution algorithm is used for resolving single frequency carrier phase ambiguity. The results of static and real flight test are presented and show that the proposed GPS translator processing system satisfies submeter accuracy.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.391-391
• /
• 2016

The carrier transport is a key factor that determines the device performances of semiconductor devices such as solar cells and transistors [1]. Particularly, devices composed of in amorphous semiconductors, the transport is often restricted by carrier trapping, associated with various defects. So far, the trapping has been studied for as-grown films at room temperature; however it has not been studied during growth under plasma processing. Here, we demonstrate the detection of trapped carriers in hydrogenated amorphous silicon (a-Si:H) films during plasma processing, and discuss the carrier trapping and defect kinetics. Using an optically pump-probe technique, we detected the trapped carriers (electrons) in an a-Si:H films during growth by a hydrogen diluted silane discharge [2]. A device-grade intrinsic a-Si:H film growing on a glass substrate was illuminated with pump and probe light. The pump induced the photocurrent, whereas the pulsed probe induced an increment in the photocurrent. The photocurrent and its increment were separately measured using a lock-in technique. Because the increment in the photocurrent originates from emission of trapped carriers, and therefore the trapped carrier density was determined from this increment under the assumption of carrier generation and recombination dynamics [2]. We found that the trapped carrier density in device grade intrinsic a-Si:H was the order of 1e17 to 1e18 cm-3. It was highly dependent on the growth conditions, particularly on the growth temperature. At 473K, the trapped carrier density was minimized. Interestingly, the detected trapped carriers were homogeneously distributed in the direction of film growth, and they were decreased once the film growth was terminated by turning off the discharge.

• 한국통신학회논문지
• /
• 제34권9B호
• /
• pp.883-891
• /
• 2009

고속 네트워크 장비에 네트워크프로세서의 사용이 보편화되고 라우팅 기능과 패컷처리 기능을 분리하는 분산형 시스템 구조가 이용됨에 따라 대용량의 트래픽을 매우 빠르게 처리하는 향상된 성능을 보일 수 있으나, 제어평면과 데이터 평면 사이에 추가 메시지 교환이 필요하여 시스템 내부 통신 지연이 증가하는 문제가 발생한다. 본 논문에서 제안한 구조는 이더넷 프로텍션 스위칭 기술에 필요한 패킷 처리 기능 블록들을 효율적으로 배치하여 설계함으로써, 메시지 교환에 따른 지연의 증가에도 불구하고 단일 링크의 장애 발생 시 50 msec급 수준의 빠른 절체 성능을 보인다. 이에 따라 높은 신뢰성과 수십 기가비트의 광대역 전송이 요구되는 캐리어 이더넷 시스템에 적합한 선형 프로텍션 스위칭 기술의 설계 및 구현 방안을 제공할 수 있다.

• 한국통신학회논문지
• /
• 제25권10A호
• /
• pp.1486-1491
• /
• 2000

A Multicarrier system required a lower speed paralled-type of signal processing in contrast to a fast serial processing in a single carrier CDMA system. For the analysis we evaluate MC-CDMA system performance with that of a single-carrier CDMA system and a multi-carrier CDMA system based on the various jamming conditions. Also we studied to the capacity level against the threat environment through the performance comparison in commercial CDMA system and Limiting repeater system. as a result we found that M-CDMA system has a robustness to narrowband interference and multipath environments like as a Rayleigh fading.

• 한국표면공학회지
• /
• 제32권3호
• /
• pp.276-280
• /
• 1999

Electrical properties of electrochromic (EC) InN thin films prepared by rf ion plating were studied. There was a correlation between the electrical properties and the electrochromism in the InN films, particularly, carrier concentration changes were responsible for the electrical resistivity changes of the films due to the electrochromism. These carrier concentration changes were caused by chemisorbed hydroxyl groups and protons. From these results, it was proved that the carrier concentration changes of the InN films was responsible for the electrochromism in the visible and near-infrared region.

• 한국전자파학회논문지
• /
• 제12권3호
• /
• pp.378-390
• /
• 2001

본 논문은 다중경로 라이시안 페이딩과 다중접속간섭이 함께 존재하는 단일 셀 내의 Multi-Carrier DS-CDMA 시스템은 오율 성능을 분석하고, 이를 Single-Carrier Ds-CDMA 시스템의 오율 성능과 비교하였다. 또한, 다중경로 페이딩과 다중접속간섭에 의하여 열화된 Multi-Carrier DS-CDMA 시스템의 성능 개선을 위해 부호화율이 1/2, 1/3 그리고 1/4인 콘볼루션 부호화 기법을 채용하여, 이로부터 얻어지는 Multi-Carrier DS-CDMA 시스템의 성능 특성을 알아 보았다. 분석 결과, 다중경로 페이딩과 다중접속간섭이 존재하는 채널에서 Single-Carrier DS-CDMA 시스템의 RAKE 수신기의 가지를 증가시키거나 Multi-Carrier DS-CDMA 시스템의 반송파의 수를 적정하게 선택함으로써 시스템의 사용자의 수를 결정할 수 있음을 알 수 있었다. 또한, 콘볼루션 부호가 적용된 Multi-Carrier CS-CCMA 시스템은 부호이득과 전력제한의 사이의 trade off를 고려하여 부호화율을 선택하여야 함을 알 수 있었다. 결과적으로 Multi-Carrier DS-CDMA 시스템은 반송파의 수가 증가할수록 처리이득은 감소하나 주파수 다이버시티 효과로 인하여 오율 성능이 개선되었으며, 낮은 칩율을 사용한 시스템의 구성이 가능함을 알 수 있었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.23.5-23
• /
• 2001

This paper is concerned with the vehicle platooning in the AHS (Automated Highway Systems). For this, a relative navigation system is developed for the vehicles operating as a platoon. The relative navigation system is based on two sensors including GPS and MMWR (Millimeter-Wave Radar) and the federated Kalman Iter processing measurements of them. The architecture of this system requires GPS measurements of a preceding vehicle via communication link. Even if GPS measurements are available, they contain errors which are unacceptably high in vehicle platooning. Therefore, GPS carrier phase is considered. Integer ambiguities of GPS carrier phase measurements are determined by using MMWR ...

• 소성∙가공
• /
• 제14권3호
• /
• pp.207-214
• /
• 2005

Blanking process is widely used fur producing various structural parts. However, fine blanking technology is frequently used as a single step blanking operation with clean cut surface of a sheared surface because the fractured surface of parts causes serious problems in the final product and therefore it must be removed by the post-processing in case of the conventional blanking. In the present investigation, a fine blanking process was designed within the framework of progressive die to produce a carrier plate assembled within the auto transmission. Finite element analysis of the shearing behavior at the respective stage of the progressive fine blanking was conducted to validate the designed die parameters. Finally the designed progressive fine blanking process was experimentally evaluated by using the machined die.

• Journal of Ceramic Processing Research
• /
• 제20권1호
• /
• pp.18-23
• /
• 2019

Chemical looping combustion (CLC) is a promising carbon capture and storage (CCS) technology whose efficiency and cost primarily relies on the oxygen carrier materials used. In this paper, gadolinium-doped ceria (GDC, Ce0.9Gd0.1O1.95) was added as a promoter to improve the oxygen transfer rate of MgMnO3-δ oxygen carrier materials. Increasing GDC content significantly increased the oxygen transfer rate of MgMnO3-δ-GDC composites for the reduction reaction due to an increase in the surface adsorption of CH4 via oxygen vacancies formed on the surface of the GDC. On the other hand, the oxygen transfer rate for the oxidation reaction decreased linearly with increasing GDC content due to the oxygen storage ability of GDC. Adsorbed oxygen molecules preferentially insert themselves into oxygen vacancies of the GDC lattice rather than reacting with (Mg,Mn)O to form MgMnO3-δ during the oxidation reaction.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 추계학술대회 논문집
• /
• pp.749-750
• /
• 2008