• Applied Biological Chemistry
• /
• v.44 no.4
• /
• pp.224-229
• /
• 2001

This study was carried out to examine the quality stability of powdered soup using powder from oyster wash water (PSW). To compare the quality stability, powdered soup from oyster hot-water extracts (PSE) was also prepared by mixing hot-water extract powder (15 g), table salt (5 g), cream powder (19 g), milk replacer (12 g), wheat flour (20 g), corn flour (15 g), starch (5 g), glucose (7.5 g), and onion powder (1.5 g). In preparing PSW, powder from oyster wash water, instead of powder from oyster hot-water extracts, was added and other additives were the same proportion as PSE. The PSW and PSE were packed with laminated film bag (OPP,$20\;{\mu}m$; PE, $20{\mu}m$; paper, $45\;g/m^3$; PE, $20\;{\mu}m$; Al, $7\;{\mu}m$; PE, $20\;{\mu}m$), and then stored at ambient temperature for 12 months. The moisture content, water activity, peroxide value, and fatty acid composition showed little changes during storage of the PSW, The pH, volatile basic nitrogen content, and brown pigment formation increased slightly, while white index decreased slightly during storage of PSW. No significant difference was observed in the changes of food components between PSW and PSE during storage. According to a sensory evaluation, the change in quality of PSW was negligible during 12 months of storage. From the results of the chemical experiment and sensory evaluation, PSW packed with laminated film bag (OPP, $20\;{\mu}m$; PE, $20\;{\mu}m$; paper, $45\;g/{\mu}m$; PE, $20\;{\mu}m$) was revealed to be preserved in good quality during 12 months of storage.

• Journal of Food Hygiene and Safety
• /
• v.29 no.2
• /
• pp.79-84
• /
• 2014

This study has been performed for about 270 days at analyzing biologically hazardous factors in order to develop HACCP system for the non heat-frozen carrot juice. A process chart was prepared by manufacturing process of raw agricultural products of non heat-frozen carrot juice, which was contained water and packing material, storage, washing, cutting, extraction of the juice, internal packing, metal detection, external packing, storage and consignment (delivery). As a result of measuring Coliform group, Staphylococcus aureus, Salmonella spp., Bacillus cereus, Listeria Monocytogenes, Enterohemorrhagic E. coli before and after washing raw carrot, Standard plate count was $4.7{\times}10^4CFU/g$ before washing but it was $1.2{\times}10^2CFU/g$ detected after washing. As a result of testing airborne bacteria (Standard plate count, Coliform group, Yeast and Fungal) depending on each workplace, number of microorganism of in packaging room, shower room and juice extraction room was detected to be 10 CFU/Plate, 60 CFU/Plate, 20 CFU/Plate, respectively. As a result of testing palm condition of workers, as number of Standard plate count, Coliform group and Staphylococcus aureus was represented to be high as $6{\times}10^4CFU/cm^2$, $0CFU/cm^2$ and $0CFU/cm^2$, respectively, an education and training for individual sanitation control was considered to be required. As a result of inspecting surface pollution level of manufacturing facility and devices, Coliform group was not detected in all the specimen but Standard plate count was most dominantly detected in scouring kier, scouring kier tray, cooling tank, grinding extractor, storage tank and packaging machine-nozzle as $8.00{\times}10CFU/cm^2$, $3.0{\times}10CFU/cm^2$, $4.3{\times}10^2CFU/cm^2$, $7.5{\times}10^2CFU/cm^2$, $6.0{\times}10CFU/cm^2$, $8.5{\times}10^2CFU/cm^2$ respectively. As a result of analyzing above hazardous factors, processing process of ultraviolet ray sterilizing where pathogenic bacteria may be prevented, reduced or removed is required to be controlled by CCP-B (Biological) and critical level (critical control point) was set at flow speed is 4L/min. Therefore, it is considered that thorough HACCP control plan including control criteria (point) of seasoning fluid processing process, countermeasures in case of its deviation, its verification method, education/training and record control would be required.

• Korean journal of food and cookery science
• /
• v.12 no.4
• /
• pp.527-534
• /
• 1996

enistein (G), and daidzein (D), the major isoflavones, were analyzed in 14 varieties of Korean soybean and various processed soybean products by using high performance liquid chromatography. Isoflavone contents (G+D) were greatly variable among varieties ranged from 308.2 $\mu\textrm{g}$/g to 1,134.2 $\mu\textrm{g}$/g and highest in Danyopkong and Jinpumkong. Among hypocotyl, cotyledon and hull of soybean the concentration of the isoflavone (G+D) in the hypocotyl was highest ranged from 2,971.7 $\mu\textrm{g}$/g to 5,704.9 $\mu\textrm{g}$/g. The distributions of genistein and daidzein were also different in hypocotyl, cotyledon and hull. Higher ratio of daidzein to genistein (D/G) was found in the hypocotyl (4-12) compared to cotyledon and hull (0.1-4). Isoflavone (G+D) contents of soymilks (Sinpaldal#2, Eunhakong) prepared at 16 hour hydration were decreased to 1.1-1.2 times compared with that at 8 hour hydration. Commercial soymilks contained much lower isoflavone (G+D) than laboratory soymilks. Soybean curd (Eunhakong) prepared with MgCl$_2$ showed higher isoflavone (G+D) contents than that with CaSO$_4$. But these values of two different soybean curds made at laboratory were similar to those of 3 commercial curds. The concentration of the isoflavones in soybean sprout separated with 3 parts revealed highest in the head and lowest in the stem. Compared with non-fermented soybean foods the fermented soybean produfts, Kochujang and soybean paste, Duen Jang, showed very low contents of isoflavone (G+D),2.8-3.0 $\mu\textrm{g}$/ｇ, 35.9-63.6 $\mu\textrm{g}$/ｇrespectively.

• Korean Journal of Food Science and Technology
• /
• v.47 no.1
• /
• pp.95-102
• /
• 2015

The Maillard reaction is a non-enzymatic reaction between amino and carbonyl groups. During milk processing, lactose reacts with milk protein through this reaction. Infant formulas (IFs) are milk-based products processed with heat-treatments, including spray-drying and sterilization. Because IFs contain higher Maillard reaction products (MRPs) than breast milk, formula-fed infants are subject to higher MRP exposure than breast milk-fed ones. In this study, we investigated the optimization of conditions for minimal MRP formation with the addition of $\small{L}$-carnitine ($\small{L}$-car), pyridoxine hydrochloride (PH), and $\small{DL}$-${\alpha}$-tocopheryl acetate (${\alpha}$-T) in an IF model system. MRP formation was monitored by response surface methodology using fluorescence intensity (FI) and 5-hydroxymethylfurfural (HMF) content. The optimal condition for minimizing the formation of MRPs was with $2.3{\mu}M$ $\small{L}$-car, $15.8{\mu}M$ PH, and $20.6{\mu}M$ ${\alpha}$-T. Under this condition, the predicted values were 77.4% FI and 248.7 ppb HMF.

• Korean Journal of Breeding Science
• /
• v.42 no.5
• /
• pp.547-554
• /
• 2010

Low-molecular-weight glutenin subunit (LMW-GS) in common wheat (Triticum aestivum L.) is important for quality processing of bread and noodles. The objectives of this study were to clarify the composition of LMW-GSs and to identify their corresponding proteins. Using LMW-GS specific primers we cloned and characterized 43 LMW-GS genes in the wheat cultivar 'Jokyoung'. Some of these genes contain polypeptides different in size due to the presence of various deletions or insertions within repetitive and glutamine-rich domains. The comparison of deduced amino acid sequence of the LMW-GS genes in Jokyoung with that of 12 groups LMW-GSs of wheat cultivar Norin 61 showed that the deduced amino acid sequences were nearly the same to LMW-GS groups of 1, 2, 3/4, 5, 7, 10 and 11. All LMW-GS genes contain eight cysteine residues, which are conserved among all of the typical LMW-GS sequences. The relative positions of cysteine residues are also conserved, except those of the first and seventh. Based on phylogenetic analysis, the 43 sequences with the same N-terminal and C-terminal amino acid sequences were clustered in the same group. To identify the proteins containing the corresponding amino acid sequences, we determined the N-terminal amino acid sequence of 7 spots of LMW-GSs of Jokyoung separated by two-dimensional gel electrophoresis (2DE). Of them, Glu-B3 (LMW-m and LMW-s) and Glu-D3 (LMW-m) were detected in two and three spots, respectively and the others were not clear. Collectively, we classified diverse LMW-GSs and identified their corresponding protein products. These results will be helpful in breeding programs for improvement of wheat flour quality.

• Food Science and Preservation
• /
• v.17 no.2
• /
• pp.190-195
• /
• 2010

Pressure, used as a minimal processing technology in the food industry, is a valuable tool ensuring microbiologically safe, shelf-stable fruit and vegetable production. Pressure could be used to deliver a greater variety of minimally processed products, as demanded by today's consumers. Weevaluated the effect of <400 MPa pressure, applied during chilling, on fresh fruit purees (strawberry, kiwi, aloe, and pomegranate) and vegetable extracts (from carrot and spinach) during cold storage (<$10^{\circ}C$) for 15-20 days. Samples were prepared in a processing facility in which total plate counts of falling and floating bacteria were controlled at $1{\times}100-10^1$ CFU/plate and $1{\times}10^2-10^3$ $CFU/m^3$ under conditions of $21-25^{\circ}C$ and 55-60% relative humidity. The aerobic plate counts of raw materials were less than $1{\times}10^3$ CFU/g. Evaluation parameters included microbiological safety, vitamin content, and sensory qualities. Although the overall quality of non-treated samples deteriorated with storage time at $10^{\circ}C$, samples pressurized at 250-350 MPa at $5-7^{\circ}C$ for 10 min showed less change, with no significant difference in microbiological safety, vitamin content, or sensory quality. The use of pressure extended the shelf-life during storage at $10^{\circ}C$.

• International Journal of Computer Science & Network Security
• /
• v.21 no.12spc
• /
• pp.664-674
• /
• 2021

The relevance of this scientific research is determined by the negative impact of the COVID-19 pandemic on the current trends and dynamics of world tourism development. This article aims to identify patterns of development of the modern tourist market, analysis of problems and prospects of development in the context of the COVID-19 pandemic. Materials and methods. General scientific methods and methods of research are used in the work: analysis, synthesis, comparison, analysis of statistical data. The analysis of the viewpoints of foreign and domestic authors on the research of the international tourist market allowed us to substantiate the actual directions of tourism development due to the influence of negative factors connected with the spread of a new coronavirus infection COVID-19. Economic-statistical, abstract-logical, and economic-mathematical methods of research were used during the process of study and data processing. Results. The analysis of the current state of the tourist market by world regions was carried out. It was found that tourism is one of the most affected sectors from COVID-19, as, by the end of 2020, the total number of tourist arrivals in the world decreased by 74% compared to the same period in 2019. The consequence of this decline was a loss of total global tourism revenues by the end of 2020, which equaled $1.3 trillion. 27% of all destinations are completely closed to international tourism. At the end of 2020, the economy of international tourism has shrunk by about 80%. In 2020 the world traveled 98 million fewer people (-83%) relative to the same period last year. Tourism was hit hardest by the pandemic in the Asia-Pacific region, where travel restrictions are as strict as possible. International arrivals in this region fell by 84% (300 million). The Middle East and Africa recorded declines of 75 and 70 percent. Despite a small and short-lived recovery in the summer of 2020, Europe lost 71% of the tourist flow, with the European continent recording the largest drop in absolute terms compared with 2019, 500 million. In North and South America, foreign arrivals declined. It is revealed that a significant decrease in tourist flows leads to a massive loss of jobs, a sharp decline in foreign exchange earnings and taxes, which limits the ability of states to support the tourism industry. Three possible scenarios of exit of the tourist industry from the crisis, reflecting the most probable changes of monthly tourist flows, are considered. The characteristics of respondents from Ukraine, Germany, and the USA and their attitude to travel depending on gender, age, education level, professional status, and monthly income are presented. About 57% of respondents from Ukraine, Poland, and the United States were planning a tourist trip in 2021. Note that people with higher or secondary education were more willing to plan such a trip. The results of the empirical study confirm that interest in domestic tourism has increased significantly in 2021. The regression model of dependence of the number of domestic tourist trips on the example of Ukraine with time tendency (t) and seasonal variations (Turˆt = 7288,498 - 20,58t - 410,88∑5) it forecast for 2020, which allows stabilizing the process of tourist trips after the pandemic to use this model to forecast for any country. Discussion. We should emphasize the seriousness of the COVID-19 pandemic and the fact that many experts and scientists believe in the long-term recovery of the tourism industry. In our opinion, the governments of the countries need to refocus on domestic tourism and deal with infrastructure development, search for new niches, formats, formation of new package deals in new - domestic - segment (new products' development (tourist routes, exhibitions, sightseeing programs, special rehabilitation programs after COVID) -19 in sanatoriums, etc.); creation of individual offers for different target audiences). Conclusions. Thus, the identified trends are associated with a decrease in the number of tourist flows, the negative impact of the pandemic on employment and income from tourism activities. International tourism needs two to four years before it returns to the level of 2019.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.43 no.1
• /
• pp.61-68
• /
• 2017

The key quality attributes of the pressed powder, one of base makeup products, are skin-affinity and spreadability. In general, there was a limit to meet skin-affinity and spreadability simultaneously, which are opposite attributes each other. In this study, air jet mill process was tried to satisfy two main properties. Skin-affinity was improved by a wet coating of sericite with a mixture of lauroyl lysine (LL) and sodium cocoyl glutamate (SCG). The application of mono-dispersed polymethyl methacrylate (PMMA) and diphenyl dimethicone/vinyl diphenyl dimethicone/silsesquioxane crosspolymer (DDVDDSC) improved both qualities. Air jet mill process has been mainly applied in the pharmaceutical and food industries, and is a method used for processing powder materials in cosmetic field. In this study, we were able to complete makeup cosmetics with an optimum particle size $6.8{\mu}m$ by combining the air jet mill process at the manufacturing stage. It was confirmed that the Ti element was uniformly distributed throughout the cosmetics by EDS mapping, and that the corners of the tabular grains were rounded by SEM analysis. It is considered that this can provide an effect of improving the spreadability when the cosmetic is applied to the skin by using a makeup tool. LL with excellent skin compatibility and SCG derived from coconut with little skin irritation were wet coated to further enhance the adhesion of sericite. SEM images were analyzed to evaluate effect of the dispersion and uniformity of PMMA on spreadability. With the spherical shapes of similar size, it was found that the spreading effect was further increased when the distribution was homogeneously mono-dispersed. The dispersion and spreadability of PMMA were confirmed by measuring the kinetic friction and optimal content was determined. The silicone rubber powder, DDVDDSC, was confirmed by evaluating the hardness, spreading value, and drop test. Finally, it was found that the dispersion of PMMA and silicone rubber powder affected spreadability. Such makeup cosmetics have excellent stability in drop test while having appropriate hardness, and good stability over time. Taken together, it is concluded that air jet mill process can be utilized as a method to improve skin-affinity and spreadability of the pressed powder.

• Culinary science and hospitality research
• /
• v.20 no.6
• /
• pp.235-244
• /
• 2014

The purpose of this study was to investigate the effect of freezing and thawing rate on the physical properties of soybean sprouts to improve the quality of processed soybean sprouts during distribution and storage. Cooked soybean sprouts were frozen by air-blast freezing (ABF) system at $-45^{\circ}C$ or natural air convection freezing (NCF) system at $-24^{\circ}C$, then thawed using microwave oven by varying output power (0, 400, 800 and 1,000 W) until $75^{\circ}C$. The quality of soybean sprouts was measured by the water content, hardness and springiness. In addition, the internal microstructure of soybean sprouts was observed by optical microscope. For results, water content of soybean sprouts thawed by 1,000 W in a microwave showed the lowest value after natural air convection freezing. Springiness of soybean sprouts thawed by all amounts of output power was decreased in comparison with control. Hardness was increased only in soybean sprouts thawed by 1,000 W after air-blast freezing. However the gaps between springiness and hardness were relatively small with control at 1,000 W thawing, after air-blast freezing. Internal microstructure of the soybean sprouts was more damaged as freezing and thawing time were increased. In conclusion, high freezing and thawing rate might improves the quality of soy bean sprout, and IQF freezing and 1,000 W of microwave thawing appears to be the optimum condition for frozen HMR production. From the results freezing and thawing process parameters might can be use as quality control parameters as various type of sprout products processing.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.24 no.6
• /
• pp.1026-1038
• /
• 1995

Although aloe lost a lot of its previous popularity in modern clinical uses as medicine numerous scientific researches still have claimed the beneficial properties(curing and general tonic effect) of aloe gel. Whereas considerable contradictory reports have helped to confuse the aloe gel issue and continually aroused controversy about aloe gel efficacy. However health food, cosmetic and medicinal products made from aloe gel are widely available in the world market especially in U.S.A. so the growing of Aloe plant and the processing of A. vera gel have become big industries in some countries. In some previous papers the salicylic acid, one of the common trace gel components, was thought to have an analgetic and antinflammatory effect. Large amount of Mg ion in the gel was suggested to act as anesthetic, Mg-lactate as antihistamic, and Aloctin A(a glycoprotein) as wound healer by promoting the cell growth. The carboxypeptidase and bradykinase activity in the gel were proposed to have the pain relieving and antiinflammatory effect. But any of thes etheories concerining the physiological action of the trace gel components has not been demonstrated by modern pharmacology, and failed to be supported by clinical research. It was suggested by some research workers that trace amount of anthraquinone compounds in the gel play an important role to act as false substrate inhibitors for PG and TX production(antiprostanoid effect), by which, they believed, inflammation, burn and frostbite, and infected wound could be healed. This hypothesis has not been substantiated. Butthe suggested antimicrobial action, antidiabetic, and antidotic effect of aloe gel are likely to be attributed to the trace anthraquinone compounds. In a lot of recent experimental reports it has been claimed that aloe gel polysaccharides(acetylglucomannan, acetylmannan, and glycoprotein) have the antimicrobial, antinflammatory, antitumour, and infected wound healing effect by immunoenhancement. It is hoped that these effects will be soon documented in clinical studies, then the controversy on aloe gel beneficial effect will cease. In the 30 days subchronic toxicity test the lowest observed adverse effect level of acemannan(acetylmannan) on dog was 5.0 mg/kg, IP. But the aloe gel is generally agreed to be harmless and non toxic even for the internal use such as health food. In the case of idiosynrasy one must keep the delayed type hypersensitivity reaction of aloe gel in mind. In conclusion it seem to be impossible to simply refuse a lot of evidences made by research workers who have claimed aloe gel's beneficial effects and to deny the fact that there had been long therapeutic histories of Aloe plants.