• Title/Summary/Keyword: Processing Trade

Search Result 314, Processing Time 0.031 seconds

Efficiency of Path Accumulation with DYMO Routing Protocol in Mobility and Load Environment (DYMO 라우팅 프로토콜의 이동 속도와 트래픽 부하에 따른 경로 축적의 효율성)

  • Naw, Kwon-Moon
    • Annual Conference of KIPS
    • /
    • 2007.11a
    • /
    • pp.1069-1072
    • /
    • 2007
  • MANET에서의 전통적인 라우팅 프로토콜은 일반적으로 두 종류로 나눠지는데 proactive 라우팅 프로토콜과 on-demand 라우팅 프로토콜이다. 라우팅 정보의 proactive 전파와 reactive 발견 사이에는 필수적인 trade-off 가 존재한다. 모든 시나리오들을 충족하는 라우팅 프로토콜이 존재하지 않는 것은 분명하다. 그래서 최적의 라우팅 프로토콜을 발견하기 위한 연구가 계속되고 있으며 IETF의 MANET 워킹그룹은 여러 다른 프로토콜을 제안 중에 있고 그 중에 하나가 on-demand 라우팅 프로토콜의 AODV를 계승한 DYMO(Dynamic MANET On-demand)이다. DYMO는 경로 축적 메커니즘을 채택하였다. 경로 발견 과정에서 노드들은 라우팅 메시지를 포워딩하기 전에 그들 자신의 라우팅 정보도 패킷에 추가할 수 있다. 결국 소스와 목적지 사이의 모든 노드들의 라우팅 정보가 교환되는 것이다. 이 논문에서는 이 경로 축적 메커니즘의 사용 유무에 따라 다양한 속도와 트래픽 부하에서 DYMO의 성능이 어떻게 변하고 최적의 환경은 무엇인지 연구해보고자 한다.

An Implementation of Adaptive Noise Canceller using Instantaneous Signal to Noise Ratio with DSP Processor (순시신호 대 잡음비 알고리즘을 이용한 적응 잡음 제거기의 DSP 구현)

  • Lee, Jae-Kyun;Ryu, Boo-Shik;Kim, Chun-Sik;Lee, Chae-Wook
    • Journal of the Institute of Convergence Signal Processing
    • /
    • v.10 no.3
    • /
    • pp.158-163
    • /
    • 2009
  • LMS(Least Mean Square) algorithm requires simple equation and is used widely because of the low complexity. If the convergence speed increase, LMS algorithm has a divergence in case of sharp environment changes. And if a stability increase, the convergence speed becomes slow. This algorithm based on a trade off between fast convergence and system stability. To improve this problem, VSSLMS (Variable Step Size LMS) algorithm was developed. The VSSLMS algorithm improved the convergence speed and performance as adjusting step size using error signal. In this paper, I-VSSLMS algorithm is proposed tor improve the performance of adaptive noise canceller in real-time environments. The proposed algorithm is applied to adaptive noise canceller using TMS320C6713 DSP board and we did simulation by real time. Then we compared performance of each algorithm and demonstrated that proposed algorithm has superior performance.

  • PDF

E-Commerce in the Historical Approach to Usage and Practice of International Trade ("무역상무(貿易商務)에의 역사적(歷史的) 어프로치와 무역취인(貿易取引)의 전자화(電子化)")

  • Tsubaki, Koji
    • THE INTERNATIONAL COMMERCE & LAW REVIEW
    • /
    • v.19
    • /
    • pp.224-242
    • /
    • 2003
  • The author believes that the main task of study in international trade usage and practice is the management of transactional risks involved in international sale of goods. They are foreign exchange risks, transportation risks, credit risk, risk of miscommunication, etc. In most cases, these risks are more serious and enormous than those involved in domestic sales. Historically, the merchant adventurers organized the voyage abroad, secured trade finance, and went around the ocean with their own or consigned cargo until around the $mid-19^{th}$ century. They did business faceto-face at the trade fair or the open port where they maintained the local offices, so-called "Trading House"(商館). Thererfore, the transactional risks might have been one-sided either with the seller or the buyer. The bottomry seemed a typical arrangement for risk sharing among the interested parties to the adventure. In this way, such organizational arrangements coped with or bore the transactional risks. With the advent of ocean liner services and wireless communication across the national border in the $19^{th}$ century, the business of merchant adventurers developed toward the clear division of labor; sales by mercantile agents, and ocean transportation by the steam ship companies. The international banking helped the process to be accelerated. Then, bills of lading backed up by the statute made it possible to conduct documentary sales with a foreign partner in different country. Thus, FOB terms including ocean freight and CIF terms emerged gradually as standard trade terms in which transactional risks were allocated through negotiation between the seller and the buyer located in different countries. Both of them did not have to go abroad with their cargo. Instead, documentation in compliance with the terms of the contract(plus an L/C in some cases) must by 'strictly' fulfilled. In other words, the set of contractual documents must be tendered in advance of the arrival of the goods at port of discharge. Trust or reliance is placed on such contractual paper documents. However, the container transport services introduced as international intermodal transport since the late 1960s frequently caused the earlier arrival of the goods at the destination before the presentation of the set of paper documents, which may take 5 to 10% of the amount of transaction. In addition, the size of the container vessel required the speedy transport documentation before sailing from the port of loading. In these circumstances, computerized processing of transport related documents became essential for inexpensive transaction cost and uninterrupted distribution of the goods. Such computerization does not stop at the phase of transportation but extends to cover the whole process of international trade, transforming the documentary sales into less-paper trade and further into paperless trade, i.e., EDI or E-Commerce. Now we face the other side of the coin, which is data security and paperless transfer of legal rights and obligations. Unfortunately, these issues are not effectively covered by a set of contracts only. Obviously, EDI or E-Commerce is based on the common business process and harmonized system of various data codes as well as the standard message formats. This essential feature of E-Commerce needs effective coordination of different divisions of business and tight control over credit arrangements in addition to the standard contract of sales. In a few word, information does not alway invite "trust". Credit flows from people, or close organizational tie-ups. It is our common understanding that, without well-orchestrated organizational arrangements made by leading companies, E-Commerce does not work well for paperless trade. With such arrangements well in place, participating E-business members do not need to seriously care for credit risk. Finally, it is also clear that E-International Commerce must be linked up with a set of government EDIs such as NACCS, Port EDI, JETRAS, etc, in Japan. Therefore, there is still a long way before us to go for E-Commerce in practice, not on the top of information manager's desk.

  • PDF

An Empirical Assessment of Organizational Commitment and Job Performance: Vietnam Small and Medium-Sized Enterprises

  • VUONG, Bui Nhat;TUNG, Dao Duy;HOA, Nguyen Dinh;CHAU, Nguyen Thi Ngoc;TUSHAR, Hasanuzzaman
    • The Journal of Asian Finance, Economics and Business
    • /
    • v.7 no.6
    • /
    • pp.277-286
    • /
    • 2020
  • Research on employee commitment to the organization is necessary for human resource management, and the result is applied in practice to improve organizational effectiveness. The aim of the present study is to explore factors affecting organizational commitment at the small and medium-sized enterprises (SMEs) in Vietnam. Besides, the relationship between organizational commitment and job performance is examined as well. The research was conducted on a sample consisting of 67 white-collar workers and 260 blue-collar workers at SMEs. A total of 327 valid complete questionnaires were input into SPSS 20 database for processing to provide evidence. The research model and hypotheses were tested using the technique of the hierarchical multiple regression analysis. The research resultsrevealed that income, reward and welfare, direct manager, working environment, coworker, and promotion opportunity tended to associate positively with organizational commitment. Besides, the finding also showed that, when the employee has a high organizational commitment, it would lead to high job performance. The main findings of this study provided some managerial implications for SMEs, in general, and managers, in particular. It implies that Vietnam's small and medium-sized enterprises should improve these six factors to retain employees as well as enhance their job performance.

Development of Performance Evaluation System for the High Speed EFEM (고속 EFEM의 성능평가시스템 개발)

  • Cho, Jeong-Hwan;Roh, Hee-Jung
    • Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.24 no.2
    • /
    • pp.27-32
    • /
    • 2010
  • This paper suggests the new performance evaluation system which is suitable for high speed EFEM(Equipment Front End Module) device using a semiconductor process. An EFEM consisting of multi-joint robots is the mainstay of semiconductor automation, shuffling silicon wafers or quartz photo-masks between ultra-clean storage carriers and a variety of processing, measurement and testing systems. The theoretical and experimental studies for the development of performance evaluation system have been carried out. The presented results from the above investigation show considerably developed performance evaluation system for the high speed EFEM Especially, it is efficient for prepareing the WTO/TBT(Technical Barriers to Trade) Agreement and the PL(Product Liability) law.

An Improved Packet Scheduling Algorithm for DSCH of UMTS (UMTS의 DSCH를 위한 개선된 패킷 스케줄링 알고리즘)

  • Cho Hyunjoon
    • The KIPS Transactions:PartC
    • /
    • v.11C no.6 s.95
    • /
    • pp.863-870
    • /
    • 2004
  • UMTS(Universal Mobile Telecommunication System) is recently recognized as a standard for 3rd generation of wireless networks and DSCH(Down-link Shared Chanel) is considered as a very effective multiplexing method in UMTS. So, it is inevitable to develope an effective packet scheduling algorithms for DSCH in UMTS. This paper describes an improved packet scheduling algorithm for DSCH of UMTS. The algorithm takes consideration in channel state for each mobile terminal to maximize link utilization, delay threshold for class 3 traffic and throughput for class 4 to get long term fairness. To verify the algorithm, we programmed a simulator using PARSEC simulation tool and got some simulation results by it. The simulation results show that the algorithm has reasonable characteristics in both of link utilization and fair-ness by trade-off.

Efficient Hardware Implementation of Real-time Rectification using Adaptively Compressed LUT

  • Kim, Jong-hak;Kim, Jae-gon;Oh, Jung-kyun;Kang, Seong-muk;Cho, Jun-Dong
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • v.16 no.1
    • /
    • pp.44-57
    • /
    • 2016
  • Rectification is used as a preprocessing to reduce the computation complexity of disparity estimation. However, rectification also requires a complex computation. To minimize the computing complexity, rectification using a lookup-table (R-LUT) has been introduced. However, since, the R-LUT consumes large amount of memory, rectification with compressed LUT (R-CLUT) has been introduced. However, the more we reduce the memory consumption, the more we need decoding overhead. Therefore, we need to attain an acceptable trade-off between the size of LUT and decoding overhead. In this paper, we present such a trade-off by adaptively combining simple coding methods, such as differential coding, modified run-length coding (MRLE), and Huffman coding. Differential coding is applied to transform coordinate data into a differential form in order to further improve the coding efficiency along with Huffman coding for better stability and MRLE for better performance. Our experimental results verified that our coding scheme yields high performance with maintaining robustness. Our method showed about ranging from 1 % to 16 % lower average inverse of compression ratio than the existing methods. Moreover, we maintained low latency with tolerable hardware overhead for real-time implementation.

Efficiency Analysis on Customs Clearance Service of Korea (한국의 통관서비스 효율성 분석에 관한 연구)

  • Lee, Ki-Woong
    • THE INTERNATIONAL COMMERCE & LAW REVIEW
    • /
    • v.53
    • /
    • pp.315-336
    • /
    • 2012
  • In year 2011 export volume of South Korea surpassed 500billion USD and overall trade volume has exceeded one trillion USD. South Korea is ranked at 7th in the world by its export volume. Such an expansion of the trade volume leads to growth in customs clearance service demand. However, there are only handfuls of studies on the efficiency of customs clearance service which customs broker provide. If the efficiency in this study is not absolute, it shows relative efficiency to decision making unit. In this research survey was conducted targeting members of Korea Customs Brokers Association. Based on the survey improvement plans to enhance efficiency of customs clearances are as follows. First, rationalize the customs broker fee. Second, setup batch processing system to improve efficiency of the work process. Third, develop new area of task such as FTA and AEO certification. Forth, raise service quality by improving professionalism of customs brokers. Fifth, work efficiency of the office in the capital area will increase. Sixth, when inspecting import export cargo, customs broker should attend at the scene by their choice. Meanwhile, difference analysis on competent customs, type of office, and duration of the business was done but all the aspects were rejected. Such aspects does not influence on its effectiveness.

  • PDF

Labview FPGA Implementation of IGC Algorithm for Real Time Noise Cancelation (실기간 소음제거를 위한 IGC Algorithm의 LabVIEW FPGA 구현)

  • Kim, Chun-Sik;Lee, Chae-Wook
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.36 no.3C
    • /
    • pp.183-189
    • /
    • 2011
  • The LMS(Least Mean Square) algorithm is generally used because of tenacity, high mating spots and simplicity of realization. But the LMS algorithm has trade-off between nonuniform collect and EMSE(Excess Mean Square Error). To overcome this weakness, variable step size is used widely but it needs a lot of calculation load. In this paper we consider new algorithm, which can reduce calculations and adapt in case of environment changes, uses original signal and noise signal of IGC(Instantaneous Gain Control). For the real time processing of IGC algorithm, we remove the logarithmic function. The performance of proposed algorithm is tested to adaptive noise canceller in automobile. We show implemented LabVIEW FPGA system of IGC algorithm is more efficient than others.

A Study on the Interface Model of Information sharing between nations for an efficient global SCM (효율적인 글로벌 SCM에 적합한 국가 간 정보 연계를 위한 인터페이스 모델 연구)

  • Park, Soo Min;Kim, Min Sik;Ahn, Kyeong Rim
    • Journal of Korea Society of Digital Industry and Information Management
    • /
    • v.8 no.4
    • /
    • pp.217-230
    • /
    • 2012
  • To look at Korea trade environment, as increasing the quantity of goods transported in North-East Asia and deepening national competitive, information-oriented logistics environment is needed. That means it is automated work process and can provide value-added service. To do this, logistics business can be efficiently handled through "Electronic Means for the Clearance of Ships" and electronically data processing. Also, by increasing the risk of international terrorism, regulation regarding to logistics security has strengthened around the advanced country, such as USA and EU, etc. or international organization, such as IMO, ISO, etc.. Furthermore, because trade and logistics environment is changing and security becomes more important in logistics area, movement or status information of goods within the port or in entry in/out becomes more and more be needed in real time. In case cross-border logistics activities, international cooperation or agreement between countries is very important. However, different opinions much happened on defining the interface. If to follow one format or type using at a specific country or organization, it was occurred to difficulty in respect of interoperability as well as additional costs or time. Therefore, this paper proposes common interface model to exchange information for the efficient global SCM for using by the output of Korea R&D project, "National Logistics Standardization System Development".