• 한국정밀공학회지
• /
• 제16권10호
• /
• pp.68-79
• /
• 1999

This paper describes an approach to collaborative design which focuses on the effects of individual activities on the overall design process. We utilize a new process modeling tool to define the process and then analyze and refine the process based on critical paths. This information is then shared over the Internet with all participants. The goal of this system is to detect critical errors at initial design stage and guide the designers to make better decisions based on the knowledge of the overall process. This system enables participating designers to publish his local process through an Internet bulletin board. Other members of the team can then provide feedback based on how the proposed process impacts their activities. The system provides a context-rich, persistent forum for collecting, preserving, and refining corporate expertise of the team. For example, designers can select any process from the bulletin board and use it as a template for his current project and then use it to maintain his own design history. This paper is based on the process modeling concepts of Design Roadamap and describe several key extensions in the area of CPM calculations and collaborative interfaces.

• 한국콘텐츠학회논문지
• /
• 제6권4호
• /
• pp.38-45
• /
• 2006

오늘날 대부분의 조직들은 프로세스 중심의 업무 관리를 위해 노력하고 있고, 이를 위한 Business Process Management(BPM)의 개념은 점차 확산되어 가고 있는 추세이다. ISO 9001:2000 품질경영시스템이 Business Process Re-engineering(BPR)의 영향을 받았고, 프로세스 중심적인 경영시스템이기 때문에, BPM은 ISO 9001:2000 품질경영시스템과 다르지 않다고 본다. 한국과학기술정보연구원(KISTI)은 2003년 11월 11일에 ISO 9001:2000 인증은 받았고, BPM 기반의 품질정보시스템을 구축하였다. KISTI의 품질정보시스템은 BPM을 기반으로 하여 프로세스 경영을 잘 지원할 것이며, BPM과 품질경영을 접목한 새로운 사례가 될 것이다.

• 산업공학
• /
• 제25권2호
• /
• pp.170-177
• /
• 2012

Process control is essential to operate the semiconductor process efficiently. This paper consider fault classification of semiconductor based cyclic signal for process control. In general, process signal usually take the different pattern depending on some different cause of fault. If faults can be classified by cause of faults, it could improve the process control through a definite and rapid diagnosis. One of the most important thing is a finding definite diagnosis in fault classification, even-though it is classified several times. This paper proposes the method that one-class classifier classify fault causes as each classes. Hotelling T2 chart, kNNDD(k-Nearest Neighbor Data Description), Distance based Novelty Detection are used to perform the one-class classifier. PCA(Principal Component Analysis) is also used to reduce the data dimension because the length of process signal is too long generally. In experiment, it generates the data based real signal patterns from semiconductor process. The objective of this experiment is to compare between the proposed method and SVM(Support Vector Machine). Most of the experiments' results show that proposed method using Distance based Novelty Detection has a good performance in classification and diagnosis problems.

• 동력기계공학회지
• /
• 제16권2호
• /
• pp.49-53
• /
• 2012

Thermal spray coatings developed by deposition of splats, it formed by impacting molten droplets on substrates during thermal spray process. In this study, the Ni-based coatings were fabricated by thermal spray process with two different process parameters, oxygen gas flow and acetylene gas flow, with three different levels of each parameters. The morphology of splats and microstructure were observed by optical microscope. Hardness test were performed on the Ni-based coatings. It was confirmed that process parameters of thermal spray process have effect in morphology of splats. These effects also have important implications on the deposit microstructure and properties of Ni-based coatings.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.445-449
• /
• 1997

In order to provide a manufacturing system with efficiency and flexibility to cope with the changes in shop floor status, the integration of process planning and operations scheduling is required. In this paper,an integrated system of process planning and operations scheduling based on the concept of process net model is presented. The process net model includes the alternative process plans. The integrated system is applied for prismatic parts.

• 한국시뮬레이션학회논문지
• /
• 제16권4호
• /
• pp.67-75
• /
• 2007

RFID(Radio Frequency IDentification)가 국방, 물류/유통, 도서 관리 등의 분야에서 바코드를 대체하는 대안으로 각광을 받고 있으나, 적용 범위가 제품 생산이나 판매 유통 관리 등의 분야로 제한되어 있는 것이 사실이다. 본 논문에서는RFID 기술을 공정관리에 적용해 본 후, 그 효과를 분석하였다. 또한 유통단계뿐 아니라 제품의 이력관리 및 품질관리에 RFID의 적용 가능성을 타진하기 위해, 제조 및 포장공정에 활용하는 방안을 제안하였다. RFID 적용 효과를 검증하기 위해 실제 제조업체를 대상으로 현재 바코드를 부착하는 공정을 RFID로 변경하였을 때 공정 개선 효과를 산출하였으며, 연구 결과 RFID 도입에 소모되는 초기 투자 비용을 상쇄할 수 있는 비용절감 효과가 있음을 확인하였다. 이로써 높은 초기 비용으로 인해 바코드에서 RFID로의 교체를 망설이는 제조업체들의 의사결정에 기여할 수 있을 것으로 기대된다.

• 산업공학
• /
• 제22권1호
• /
• pp.26-37
• /
• 2009

BPM(Business Process Management) secures the agility of an enterprise through automation, integration, and optimization of business process. For the successful BPM introduction, the evaluation and selection of suitable processes for BPM are very important. But as to process evaluation and selection standards, in fact, various selection elements exist and they have to be considered. Therefore, it is very difficult to evaluate systematically and reasonably business processes for enterprises or concerned persons that plan to introduce BPM. This paper describes a Web-based business process evaluation model for BPM using BSC(Balanced Scorecard) and fuzzy AHP(Analytic Hierarchy Process). A Web-based business process evaluation system was implemented based on this and it provides many useful business process evaluation results to enterprises or concerned persons that have insufficient experience and knowledge about BPM, and initially plan to implement BPMS(Business Process Management System). Thus, this paper demonstrates the applicability of fuzzy AHP concept in business process evaluation and selection for BPM, and provides a systemic guidance in the decision-making process.

• 한국CDE학회논문집
• /
• 제11권2호
• /
• pp.77-87
• /
• 2006

It is necessary to change the existing design process to cope with a short life-cycle product and various customer's demands. Also a frequent design change may delay the whole design process and it will increase the unit cost of the production. New alternatives or techniques have emerged to solve the existing design problems, such as a knowledge based engineering, an intelligent CAD, a function based design, and so on. In this paper, we propose a hybrid design system with a knowledge based design methodology and a function based design technique. The knowledge based design is good at a frequent design change and the function based design is effective to extract a core design behavior. In an early design process, the system utilizes a core design behavior through the function based design process. On the other hand, the system manages complicated design issues with the knowledge based design technique in the detailed design process. We conclude that the hybrid design system can bring fair effects on implementing an efficient design environment in aspect of time and expense.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권3호
• /
• pp.965-983
• /
• 2014

Concurrent behaviors of multithreaded programs cannot be described effectively by automata-based models. Thus, concurrent program intrusion attempts cannot be detected. To address this problem, we proposed the process algebra-based detection model for multithreaded programs (PADMP). We generate process expressions by static binary code analysis. We then add concurrency operators to process expressions and propose a model construction algorithm based on process algebra. We also present a definition of process equivalence and behavior detection rules. Experiments demonstrate that the proposed method can accurately detect errors in multithreaded programs and has linear space-time complexity. The proposed method provides effective support for concurrent behavior modeling and detection.

• 한국유통학회지:유통연구
• /
• 제6권1호
• /
• pp.22-35
• /
• 2001

The focus of Business Process Re-engineering (BPR) has been extended to inter-business process that cuts across independent companies. Combined with Supply Chain Management (SCM), inter-business process reengineering (IBPR) focuses on synchronization of business activities among trading partners to achieve performance improvements in inventory management and cycle time. This paper reviews the business process reengineering movement from the historical perspective and presents a case of inter-business process reengineering using the latest internet-based Business-to- Business (B2B) technology based on Collaborative Planning, Forecasting, and Replenishment (CPFR). The case demonstrates how CPFR technology reengineers the distribution process between Heineken USA and its distributors. As world's first implementor of web-based collaborative planning system, Heineken USA reduces cycle time from determining the customer need to delivery of the need by 50% and increases sales revenue by 10％. B2B commerce on the internet is predicted to grow from $90 billion in 1999 to $2.0 trillion in 2003. This paper provides the management with the bench-marking case on inter-business process reengineering using B2B e-commerce technology.