• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.15 no.26
• /
• pp.77-84
• /
• 1992

This paper constructs Croup Technology process-based learning curve model adjusted to a Group Technology environment which accounts for shared learning that occurs when multiple products utilize some of the same process steps. Through this constructed model, the estimated times and productivity of labor calculated by the Group Technology process-based learning curve model are compared with those generated by employing product-based 1 earning curve model. For sensitivity analysis of the model, the impact of learning rate and the ordered production quantity on the ratio differences between Group Technology process-based learning curve model and product-based learning curve model are examined. These results indicate the critical importance of employing Group Technology process-based learning curve model when a process spans multiple products.

• Journal of the Korean Society of Systems Engineering
• /
• v.5 no.2
• /
• pp.57-62
• /
• 2009

An embedded system is a computer system designed to perform one or a few dedicated functions often with real-time computing constraints. A traditional design process of embedded systems is the development of document-centric approach, and it is difficult to develop an embedded system efficiently because communication between teams or steps is not smooth. So the Model Based Design Process are applied to the development of embedded systems. This paper will compare the Model Based Design Process and the traditional design process, and introduce example of development of vehicle device applied the Model Based Design Process.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.445-449
• /
• 1997

In order to provide a manufacturing system with efficiency and flexibility to cope with the changes in shop floor status, the integration of process planning and operations scheduling is required. In this paper,an integrated system of process planning and operations scheduling based on the concept of process net model is presented. The process net model includes the alternative process plans. The integrated system is applied for prismatic parts.

• Journal of Information Processing Systems
• /
• v.1 no.1 s.1
• /
• pp.62-69
• /
• 2005

This paper presents a queuing analysis model of a PC-based software router supporting IPv6-IPv4 translation for residential gateway. The proposed models are M/G/1/K or MMPP-2/G/1/K by arrival process of the software PC router. M/G/1/K is a model of normal traffic and MMPP-2/G/1/K is a model of burst traffic. In M/G/1/K, the arriving process is assumed to be a Poisson process, which is independent and identically distributed. In MMPP-2/G/1/K, the arriving process is assumed to be two-state Markov Modulated Poisson Process (MMPP) which is changed from one state to another state with intensity. The service time distribution is general distribution and the service discipline of the server is processor sharing. Also, the total number of packets that can be processed at one time is limited to K. We obtain performance metrics of PC-based software router for residential gateway such as system sojourn time blocking probability and throughput based on the proposed model. Compared to other models, our model is simpler and it is easier to estimate model parameters. Validation results show that the model estimates the performance of the target system.

• Management & Information Systems Review
• /
• v.31 no.4
• /
• pp.433-444
• /
• 2012

The purpose of this study is to develop the evaluation model of BPMS(business process management systems) based on AHP(analytical hierarchy process). In this study, we draw some criteria to select BPMS solution from a experts panel. And, we develop an evaluation model based on AHP method. As a result, each organization can select the effective BPMS solution from the proposed evaluation model.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2002.10a
• /
• pp.211-218
• /
• 2002

An entity-based integrated design product and process model uses product and process entities to describe design information and design activities, respectively. The concepts and notation for product and process entities in the entity-based integrated design model are similar to the concepts of object-oriented programming languages such as C++ and Smalltalk. This paper uses C++ to program an entity-based integrated design model for building frames structures. The design information and activities involved in the three dimensional building space, the locations of frames, and the grouping of frames represented as entities in the entity-based integrated design model are transformed to C++ codes. Each product or process entity can be basically transformed to an class. The attributes of an entity can be defined as variables and member functions of a class.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2001.10a
• /
• pp.121-124
• /
• 2001

On-line prediction model which calculate roll force, roll power and forward slip of continuous hot strip rolling was built based on the results of plane strait rigid-viscoplastic finite element process model. Using the integrated FE process model, a series of finite element simulation was conducted over the process variables, and the influence of various process conditions on non-dimensional parameters was inspected. The prediction accuracy of the proposed on-line model under front and back tension is examined through comparison with predictions from a finite element process model over the various process conditions. In addition, we examined the validity of the on-line prediction model through comparison with roll force of experiment in hot rolling.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.5
• /
• pp.77-87
• /
• 1995

In-process detection of drill wear is one of the most important technoligies for automatic, unmaned machining systems. In this study, an on-line drill wear estimation model based on spindle/Z-axis motor currents generated during the drilling process is proposed. The theoretical model is obtained by integrating the drilling process model and the servomechanism model. The drilling process model describes the relationship of drill wear and drilling torque/ thrust force, whereas the servomechanism model describes the relationship of drilling torque/ thrust force applied to motor and spindle/Z-axis motor current. Evaluation tests have shown that the proposed model is a good real-time estimator for drill wear.

• Journal of Korean Society of Water and Wastewater
• /
• v.29 no.3
• /
• pp.427-436
• /
• 2015

Developing two process models to simulate wastewater treatment process is needed to draw a comparison between measured BOD data and estimated process model data: a mathematical model based on the process mass-balance and an ANN (artificial neural network) model. Those two types of simulator can fit well in terms of effluent BOD data, which models are formulated based on the distinctive five parameters: influent flow rate, effluent flow rate, influent BOD concentration, biomass concentration, and returned sludge percentage. The structuralized mass-balance model and ANN modeI with seasonal periods can estimate data set more precisely, and changing optimization algorithm for the penalty could be a useful option to tune up the process behavior estimations. An complex model such as ANN model coupled with mass-balance equation will be required to simulate process dynamics more accurately.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.280-283
• /
• 2015

Many construction projects have used the building information modeling (BIM) extensively considering data interoperability throughout the projects' lifecycles. However, the current approach, which is to collect the data required to support facility maintenance system (FMS) has a significant shortcoming in that there are various individual pieces of information to represent the performance of the facility and the condition of each of the elements of the facility. Since a heterogeneous external database could be used to manage a construction project, all of the conditions related to the building cannot be included in an integrated BIM-based building model for data exchange. In this paper, we proposed an ontology-based facility maintenance information model to integrate multiple, related pieces of information on the construction project using industry foundation classesbased (IFC-based) BIM data. The proposed process will enable the engineers who are responsible for facility management to use a BIM-based model directly in the FMS-based work process without having to do additional data input. The proposed process can help ensure that the management of FMS information is more accurate and reliable.