• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.212-217
• /
• 1993

In this paper, the hardening depth in Laser surface hardening process is estimated using a multilayered neural network. Input data of the neural network are surface temperature of five points, power and travelling speed of Laser beam. A FDM(finite difference method) is used for modeling the Laser surface hardening process. This model is used to obtain the network's training data sample and to evaluate the performance of the neural network estimator. The simulational results showed that the proposed scheme can be used to estimate the hardening depth on real time.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.552-555
• /
• 2002

In order to achieve higher performance and low cost a-Si TFT-LCD panel, new material architecture and its process integration for a-Si TFT array manufacturing method were developed. Material combination of low resistant dry-etchable metal and new pixel electrode under currently adopted 4 mask process made it possible to get more-simplified manufacturing method and better device performance for the a-Si TFT-LCD application. Proposed 4 mask process architecture with optimized wet etchants and dry etching process was applicable to various devices such as notebook, monitor and TV.

• Journal of the Korean Society of Costume
• /
• v.64 no.4
• /
• pp.21-36
• /
• 2014

The purpose of this study is to suggest an effective fashion design process using social network services(SNS) as a method to develop designs. Fashion design process was systemized through literature study. The characteristics of social network, and element and method of network formation were investigated, and then design processes using SNS were suggested through survey study. This was done by applying formation of network and its method in SNS with contents of fashion to stage of process to develop fashion design. The study results are as follows. First, Fashion design process using SNS is composed of 5 stages. Second, SNS types with contents of fashion were classified to five types: blog, community, connection of fashion web service and SNS, fashion SNS, and fashion SNS game. Among them, types where development of fashion design and product distribution was done by formation of network are connected type of fashion web service and SNS, fashion SNS type. Fashion design development can be done by compiling, having contests, and cooperative work. A method that can be used for making assessments and decision is voting and predicting the market. Third, Fashion design process using SNS is composed of the stages such as planning, compiling, analysis, decision, implementation, and formation of network. It was analyzed that by connecting stages of collection and evaluation of information through participation of users, new contents were produced and there was a structure that was cycled continuously.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.25 no.1
• /
• pp.15-26
• /
• 2000

We consider an open tandem queueing network with population constraint and constant service times. The total number of customers that may be present in the network can not exceed a given value k. Customers arriving at the queueing network when there are more than k customers are forced to walt in an external queue. The arrival process to the queueing network is assumed to be arbitrary. It is known that the queueing network with population constrant and constant service times can be transformed into a simple network involving only two nodes. In this paper, the departure process from the queueing network is examined using this simple network. An approximation can be calculated with accuracy. Finally, validations against simulation data establish the tightness of these.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.18 no.6
• /
• pp.681-689
• /
• 2009

Disk grinding was often applied to deburring process in order to enhance the final product quality. Inherent chamfering capability of the flexible disk grinding process in the early stage was analyzed with respect to various process parameters including workpiece length, wheel speed, depth of cut and feed. Initial chamfered edge defined as arc zone was characterized with local radius of curvature. Averaged radius and arc zone ratio was well evaluated using neural network system. Additional neural network analysis adding workpiece length showed enhance performance in predicting arc zone ratio and curvature radius with reduced error rate. A process condition design parameter was estimated using remaining input and output parameters with the prediction error rate lower than 2.0% depending on the relevant input parameter combination and neural network structure composition.

• Journal of Computing Science and Engineering
• /
• v.9 no.2
• /
• pp.108-117
• /
• 2015

Interrupt handling is generally separated from process scheduling. This can lead to a scheduling anomaly and priority inversion. The processor can interrupt a higher priority process that is currently executing, in order to handle a network packet reception interruption on behalf of its intended lower priority receiver process. We propose a new network interrupt handling scheme that combines interrupt handling with process scheduling and the priority of the process. The proposed scheme employs techniques to identify the intended receiver process of an incoming packet at an earlier phase. We implement a prototype system of the proposed scheme on Linux 2.6, and our experiment results show that the prototype system supports the predictable real-time behavior of higher priority processes even when excessive traffic is sent to lower priority processes.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1024-1026
• /
• 2004

We have developed the five mask $PMOS^1$ and the six mask CMOS process architecture for poly-Si TFT. In order to have a competitive process with that for a-Si TFT, the simple co-planar electrode structure whose data line electrode and pixel electrode are on the same plane was adopted. In addition, RGB + White four color $technology^2$ were applied to achieve high aperture ratio and transmittance. Using the aforementioned process architecture and four color technology, 2.0 inch qCIF transmissive micro-reflectance (TMR) device was successfully fabricated.

• Journal of the Korean Ceramic Society
• /
• v.41 no.5
• /
• pp.353-358
• /
• 2004

Spray drying is a unique drying process for powder production. Spray dried product must be free-flowing in order to fill the pressing dies rapidly, especially in the ceramic production. The important powder characteristics are; the particle size distribu-tion and moisture content of the finished product that can be estimated and adjusted by the spray dryer operation, within limits, through regulation of atomizer and drying conditions. In order to estimate the moisture content of the resultant dried product, we modeled the control system of the drying process using two different Artificial Neural Network (ANN) approaches, namely the Back-Propagation Multiplayer Perceptron (BPMLP) algorithm and the Radial Basis Function (RBF) network. It was found out that the performance of both of the artificial neural network models were quite significant and the total testing error for the 100 data was 0.8 and 0.7 for the BPMLP algorithm and the RBF network respectively.

• 한국디지털정책학회:학술대회논문집
• /
• 2006.06a
• /
• pp.65-75
• /
• 2006

This paper presents rationales for a network centric organization and their impacts on organizational effectiveness. A network centric organization shows characteristics that may be used to improve organizational effectiveness and process innovations. However, some conditions are to be satisfied to build a network centric organization. This paper summarizes such pre-conditions for a network centric organization. Korea is evaluated to be a good place to build a network centric organization because of its successful adoption of IT.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.04a
• /
• pp.272-277
• /
• 2003

In order to predict vibration during end-milling process, the cutting dynamics was modelled by using neural network and combined with structural dynamics by considering dynamic cutting states. Specific cutting constants of the cutting dynamics model were obtained by averaging cutting forces and tool diameter, cutting speed, feed, axial depth radial depth were considered as machining factors. Cutting farces by test and by neural network simulation were compared and the vibration during end-milling was simulated.