• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.5
• /
• pp.851-856
• /
• 2017

Research on the edge isolation process of typical polycrystalline silicon solar cells was carried out using laser scribing equipment. The voltage-current characteristics of the solar cell before and after laser scribing were analyzed using a solar simulator. Current density and efficiency increased as the fill factor of the solar cell remained constant after the laser scribing process. The efficiency of the solar cell can be increased in a short time by the edge isolation process performed via a laser scribing process. The polycrystalline silicon solar cell was made into a series electrode, and the efficiency of the solar cell increased because the width of the solar cell was narrowed and the active region was widened by the laser scribing process.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.3
• /
• pp.139-148
• /
• 2016

Thermodynamic analysis is conducted on the first-order approximation model for turbines and compressors. It is shown that the adiabatic efficiency could be greater than unity, depending on the entropic mean temperature, entropy generation, thermal reservoir temperature, and heat transfer. Therefore, adiabatic efficiency applied to a diabatic control volume results in an error overestimating its performance. To resolve this overestimation, it is suggested that a reversible diabatic process be referred to as an ideal process to evaluate diabatic efficiency. The diabatic efficiency suggested in this work is proven to always be less than unity and it is smaller than the exergy efficiency in most cases. The diabatic efficiency could be used as a more general definition of efficiency, which would include adiabatic efficiency.

• Environmental Engineering Research
• /
• v.25 no.4
• /
• pp.588-596
• /
• 2020

This study was carried out to increase the treatment efficiency through the improvement of the conventional biological process, and to propose the optimal treatment direction. The optimal treatment conditions were derived based on the results of the spike damage tests in each single process. The removal efficiency of micropharmaceuticals was further increased when an ozone treatment process was added to the biological process compared to the single process. The soil and activated carbon adsorption process was introduced in the post-treatment to remove the micropharmaceutical residues, and the removal efficiency of the pharmaceduticals in the final effluent was more than 85% in spike damage experiment. In particular, the continuous process of biological treatment-ozone-adsorption could ensure the stable treatment of micropharmaceuticals, which had not been efficiently removed in the single process, as it showed more than 80% removal efficiency. Therefore, it is expected that the addition of the ozone oxidation and activated carbon adsorption process to the existing sewage treatment facilities can contribute to the efficient removal of micropharmaceuticals.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.10a
• /
• pp.156-156
• /
• 2009

High efficiency silicon solar cell technology based on planar technology has been improved by various kinds of process by using the wet etching process. In particular, the buried contact solar cell has been successfully studied. In the present work, a simplified process of the buried contact solar cell has been suggested to help one design effectively the high-efficiency solar cell.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.2
• /
• pp.505-511
• /
• 2021

This study aims to investigate the effects of e-purchasing on increasing transparency, expanding market access, and the efficiency of the government procurement process. This study also investigates how transparency of the procurement process, improved market access and the efficiency of the procurement process in e-purchasing will decrease the level of fraudulent government procurement in Indonesia. The questionnaires were distributed to the Procurement Service Units (ULP) of Local Governments through email. There are currently 542 ULPs in Indonesia based on the data of the Government Procurement Policy Institute (LKPP). However, only 520 ULPs had their email addresses traced, 120 ULP returned the questionnaires and the response rate is lower than it was expected. The data research was analyzed by a structural equation model (SEM) by using WarpPLS 7.0. The results reveal that the e-purchasing effect on the transparency, the expansion of market access, and the efficiency of the government procurement process. The other findings show the negative effect between efficiency in government procurement and fraud in government procurement. The findings of this study suggest that efficiency in the process of government procurement will minimize fraud in government procurement. However, transparency in government procurement and the expansion of market access was not sufficient to minimize fraud in government procurement.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.5
• /
• pp.1200-1210
• /
• 1990

Conventional efficiencies of the adiabatic compression process such as isentropic efficiency and polytropic efficiency can be explained as exergetic efficiencies replacing the reference atmospheric temperature with the temperature which can be determined in the process itself. So that, other efficies such as maximum isentropic efficiency can be defined by giving proper reference temperatures. By applying the same logical principles, exergetic and other rational efficiencies for the non-adiabatic compression process are also defined and discussed for their physical meanings and reasonable engineering applications.

• Smart Media Journal
• /
• v.11 no.1
• /
• pp.9-16
• /
• 2022

With the development of online commercializing technology and the growth of online market, it has become extremely important for companies that aim to commercialize their products and services to control time and resources. Even when a single company has control over the entire process, it is necessary to maintain the efficiency among the process of development. In particular, when there is a lot of cooperation throughout the course of development, requiring many parties to communicate with each other, the issue of declining efficiency becomes much clearer. The timing of when to launch a product or service has become just as important as completing and testing them for companies. Companies have developed new tools to prevent situations that may lead to inefficiency in the development process, including an increase in the amount of resource used or issues with security maintenance. However, there is a lack of proper measurement tool that assesses what kind of additional benefits the entire process of the company is bringing, or whether or not the processes need to be improved in certain areas. Thus, this study aims to suggest a method to measure efficiency, to provide an empirical efficiency measurement method for the development process of online content.

• Journal of Environmental Science International
• /
• v.12 no.12
• /
• pp.1255-1260
• /
• 2003

Plasma-photocatalytic oxidation process was applied in the decomposition of Triethylamine(TEA) and Methyl ethyl ketone(MEK). Plasma reactor was made entirely of pyrex glass and consists of 24mm inner diameter, 1,800mm length and discharge electrode of 0.4mm stainless steel. And initial concentrations of TEA and MEK for plasma-photocatalytic oxidation are 100 ppm. Odor gas samples were taken by gas-tight syringe from a glass sampling bulb which was located at reactor inlet and outlet, and TEA and MEK were determined by GC-FID. For plasma process, the decomposition efficiency of TEA and MEK were evaluated by varying different flowrates and decomposition efficiency of TEA and MEK increased considerably with decreasing treatment flowrates. For photocatalytic oxidation process, also the decomposition efficiency of TEA and MEK increased considerably with decreasing treatment flowrates. The decomposition efficiency of MEK was 57.8％, 34.2％, 18.8％ respectively and the decomposition efficiency of TEA was reached all 100％. This result is higher than that of plasma process only, From this study, the results indicate that plasma-photocatalytic oxidation process is ideal for treatment of TEA and MEK.

• The Journal of Information Systems
• /
• v.20 no.2
• /
• pp.1-20
• /
• 2011

In this study, we verify the relationship, which is presented by ISO/IEC 15504, between the assessor's competence and the efficiency of assessment. The ISO standard has been developed by many formal trial experiences for the software process assessment. The software process assessment determines the process capability, and makes the software process improvement possible in the development cycle. In the field assessment, third-party and team-based assessments are generally recommended. Therefore assessors' competences are essential to achieve the effectiveness and the efficiency of assessment. Survey data are collected from the third-party process assessment of a real IT industry, and the analysis is done by a causal modelling technique - PLS. Some findings are as follows. Depending on assessors' SE experiences, effects of the assessor's competence are existed, and their standard knowledge and assessment skill are effected each other. And the efficiency of assessment depends on the assessor's competence. In addition, the power analysis is presented and future research is suggested, because of many limitations of this study.

• Journal of Environmental Science International
• /
• v.8 no.2
• /
• pp.221-225
• /
• 1999

This study was conducted to evaluate the treatment efficiency including reaction kinetics and hydraulic characteristics of food processing wastewater by using an ejector-type aeration system (ETAS) in activated sludge process. The oxygen transfer efficiency in ETAS can be changed in accordance with the depth of reactor. However, the optimum air velocity was found less than 1.82 m/hr at a superficial liquid velocity of 634 m/hr. The ETAS process showed higher organic material removal efficiency than that of the existing activated sludge process under hydraulic detention time 6 to 12 hours. This process, which can maintain MLVSS highly, is able to have high organic material removal efficiency at short HRT and deal with variable organic material loading.