• Transactions of Materials Processing
• /
• v.12 no.2
• /
• pp.110-115
• /
• 2003

This paper is concerned with the compression test and forming process of flange by using virtual reality and analysis(simulation) program. This virtual manufacturing can be carried out one personal computer without any expensive devices for experiment. The virtual manufacturing composed of three modules such as the imput, calculation and the output modules on internet. Internet user can give the material's property and process parameters to the sever computer at the input module. On the calculation module, a simulator computes the virtual manufacturing process by analysis program and stores the data as a file. The output module is the program in which internet user can confirm virtual manufacturing results by showing tables, graphs, and 3D animation. This programs is designed by an internet language such as HTML, CGI, VRML and JAVA ,while analysis programs use the finite increasing, the virtual manufacturing technique will substitute many real experiments in the future.

• Journal of the Korea Computer Industry Society
• /
• v.5 no.4
• /
• pp.503-510
• /
• 2004

The summary of this paper is as follows. The literature on existing expert system maintenance software technique are reviewed in Module program, a case of assembly line process problem at construction industry and planning expert system to solve this problem at construction as a standard configured process system are discussed. the regenerative expert system approach for the construction process expert system and its example for the assembly line construction process appear in the research also, this paper shows the architecture and some feature of the CES.(Construction Expert System), which is a prototype implemented for the regenerative expert system approach. the paper introduce the framework of the regenerative expert approach as a general framework of developing and maintaining a large-scale expert systems.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.6
• /
• pp.2353-2358
• /
• 2017

A femtosecond laser pre-annealing process based on indium zinc oxide (IZO) thin-film transistors (TFTs) is fabricated. We demonstrate a stable pre-annealing process to analyze surface structure change of thin films, and we maintain electrical stability and improve electrical performance. Furthermore, dynamic electrical characteristics of the IZO TFTs were investigated. Femtosecond laser pre-annealing process-based IZO TFTs exhibit a field-effect mobility of $3.75cm^2/Vs$, an $I_{on}/I_{off}$ ratio of $1.77{\times}10^5$, a threshold voltage of 1.13 V, and a subthreshold swing of 1.21 V/dec. And the IZO-based inverter shows a fast switching behavior response. From this study, IZO TFTs from using the femtosecond laser annealing technique were found to strongly affect the electrical performance and charge transport dynamics in electronic devices.

• Journal of the Korean Society of Systems Engineering
• /
• v.7 no.1
• /
• pp.53-56
• /
• 2011

Configuration management plays a key role in systems engineering process for any project from earlier stage of development. It consists of five major activities, ie., configuration management planing, configuration identification, configuration control, configuration status accounting and configuration verification and audit, and is essential to control system design, development and operation throughout entire life cycle of the system development. And it is directly associated with other part of systems engineering management process, ie., technical data management which provides traceability of important decisions and changes during development. In this paper, we describe how to apply CASE(Computer-aided Systems Engineering) tool-Cradle for the configuration management to achieve effectiveness of Technical Management process.

• Advances in materials Research
• /
• v.3 no.2
• /
• pp.91-103
• /
• 2014

A study that demonstrates how to investigate the molded part quality and the consistency of injection process based on the rheological concept is proposed. It is important for plastic material whose melt viscosity is variable with respect to the processing condition. The formulations to couple the melt viscosity with injection pressure and fill time are derived first. Taking calculations of the measured pressure and the time by using these formulations, the melt viscosity in injection process can be determined on machine. As the relation between the injection speed and the melt viscosity is constructed, the influences of the setting parameter of injection machine on the molded part quality can be investigated through evaluating the state of the melt viscosity. In addition, a pressure sensor bushing (PSB) designed with a quick installation feature is also provided and validated. The results show that a higher injection speed improves the tensile strength of the molded part but also the consistency of the molded part quality. This work provides an alternative to evaluate the molding quality scientifically.

• Journal of Korea Multimedia Society
• /
• v.14 no.9
• /
• pp.1202-1209
• /
• 2011

Neuro feedback training using ElectroEncephalo Grams (EEGs) is commonly utilized in the treatment of Alzheimer's disease, and Attention Deficit Hyperactivity Disorder (ADHD). Recently, BCI (Brain-computer Interface) contents have developed, not for the purpose of treatment, but for concentration improvement or brain relaxation training. However, as each user has different wave forms, it is hard to develop contents controlled by such different wave. Therefore, an EEG process that allows the ability to transform the variety of wave forms into one standard signal and use it without taking a user's characteristic of EEG into account, is required. In this paper, a framework that can reduce users' characteristics by normalizing and converting measured EEGs is proposed for contents. This framework also contains the process that controls different brainwave measuring devices. In experiment a handling process applying the proposed framework to the developed BCI contents is introduced.

• Journal of Convergence Society for SMB
• /
• v.2 no.1
• /
• pp.1-9
• /
• 2012

This work focuses on reducing claims by improving the existing receipt process, and proposed an executable Claims solving method used QR code. We propose a effected claim process methods after introduced claim process based on bar code, RFID. Also, we illustrated proposed claim solving method to M company and verified the useful and effectiveness by a survey.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.2448-2450
• /
• 2005

A robotic external fixation system for the surgery of bone deformity correction was developed to simulate the execution process of mal-unioned femur by the adjustment of the joints of the fixation system. An inverse kinematics analysis algorithm was developed to calculate the necessary rotations and translations at each joint of the robotic system. The computer graphic model was developed for validation of the analysis result and visualization of the surgical process. For given rotational and angular deformity case, the surgical execution process using the robotic system was well matched with the pre-operative planning. The final residual rotational deformities were within $1.0^{\circ}{\sim}1.6^{\circ}$ after surgical correction process. The presented robotic system with computer-aided planning can be useful for knowledge-based fracture treatment and bone deformity correction under external fixation.

• Proceedings of the IEEK Conference
• /
• 2002.06b
• /
• pp.209-212
• /
• 2002

As the mask design rules get smaller, the probability of the process failure becomes higher doc to the narrow overlay margin between the contact and metal interconnect layers. To obtain the minimum process margin, a tabbing and cutting method Is applied with the rule based optical\ulcorner proximity correction to the metal layer, so that the protection to bridge problems caused by the insufficient space margin between the metal layers can be accomplished. The side-lobe phenomenon from the attenuated phase shift mask with the tight design rule is analyzed through the aerial image simulation for test patterns with variation of the process parameters such as numerical aperture, transmission rate, and partial coherence. The corrected patterns are finally generated by the rules extracted from the side-lobe simulation.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.7
• /
• pp.85-92
• /
• 2016

The law of large numbers, central limit theorem, and connection among binomial distribution, normal distribution, and statistical estimation require dynamics of continuous visualization for students' better understanding of the concepts. During this visualization process, the differences and similarities between statistical probability and mathematical probability that students should observe need to be provided with the intermediate steps in the converging process. We propose a visualization method that can integrate intermediate processes and results through Excel. In this process, students' experiences with dynamic visualization help them to perceive that the results are continuously changed and extracted from multiple situations. Considering modeling as a key process, we developed a classroom exercise using Excel to estimate the population mean and standard deviation by using a sample mean computed from a collection of data out of the population through sampling.