• Proceedings of the Korean Society of Computer Information Conference
• /
• 2024.01a
• /
• pp.89-90
• /
• 2024

본 연구는 와이어 하네스의 불량 여부를 정확하고 빠르게 감지하기 위해 컴퓨터 비전을 활용하여 압착된 단자의 길이, 단자 끝단 치수(너비), 압착된 부분의 폭(와이어부, 심선부)의 6가지 측정값을 계산하는 것을 목표로 한다. 단자 영역별 특징과 배경과 객체 간 음영 차이를 이용하여 기준점을 생성함으로써 값들을 추출하였다. 최종적으로 각 측정 유형별로 99.1%, 98.7%, 92.6%, 92.5%, 99.9%, 99.7% 정확도를 달성하였으며, 모든 측정값에서 평균 97%의 정확도로 우수한 결과를 얻었다.

• Progress in Superconductivity and Cryogenics
• /
• v.26 no.1
• /
• pp.1-4
• /
• 2024

This study explores the use of a bulk type high-temperature superconductors (HTS) as trapped field magnets in synchronous motors. A HTS bulk is examined for its ability to generate powerful magnetic fields over a permanent magnet and to eliminate the need for a direct power supply connection compared to a tape form of HTS. A 150 kW interior-mounted bulk-type superconducting synchronous motor is designed and analyzed. The A-H formulation is used to numerical analysis. The results show superior electrical performance and weight reduction when comparing the designed model with the conventional permanent magnet synchronous motor of the same topology. This study presents HTS bulk synchronous motor's overall design process and highlights its potential in achieving relatively high power density than conventional permanent magnet synchronous motor.

• Journal of Internet Computing and Services
• /
• v.24 no.5
• /
• pp.51-66
• /
• 2023

In this paper, we propose a new type of process discovery framework, which is named as control-path-driven process group discovery framework, to be used for process mining and process reengineering in supporting life-cycle management of business process models. In addition, we develop a process mining system based on the proposed framework and perform experimental verification through it. The process execution event logs applied to the experimental effectiveness and verification are specially defined as Process BIG-Logs, and we use it as the input datasets for the proposed discovery framework. As an eventual goal of this paper, we design and implement a control path-driven process group discovery algorithm and framework that is improved from the ρ-algorithm, and we try to verify the functional correctness of the proposed algorithm and framework by using the implemented system with a BIG-Log dataset. Note that all the process mining algorithm, framework, and system developed in this paper are based on the structural information control net process modeling methodology.

• Proceedings of the Korean Information Science Society Conference
• /
• 2010.06a
• /
• pp.295-296
• /
• 2010

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.10a
• /
• pp.52-53
• /
• 2007

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2164-2168
• /
• 2003

Real time control system such as in factory automation fields, defense field, aerospace, railway industries, financial trading and so forth, includes multiple computers on multiple nodes, and share data to process various actions and functions. This is similar to multitasking in a multiprocessor computer system. The task processing efficiency of such system is proportionally increased by process speed of each process computer. And also it is greatly influenced by communication latencies of each node. To provide proper operation of such real time system, a network that can guarantee deterministic exchange of certain amount of data within a limited time is required. Such network is called as a real time network. As for modern distributed control system, the timeliness of data exchange gives important factor for the dynamics of entire control system. In a real time network system, exchanged data are determined by off-line design process to provide the timeliness of data. In other word, designer of network makes up a network data table that describes the specification of data exchanged between control equipments. And by this off-line design result, the network data are exchanged by predetermined schedule. First, this paper explains international standard real time network TCN (Train Communication Network) applied to the KHST (Korean High Speed Train) project. And then it explains the computer program developed for design tool of network data table of TCN.

• Journal of Korea Society of Industrial Information Systems
• /
• v.20 no.1
• /
• pp.1-7
• /
• 2015

In this paper, a 12-bit high resolution, power and area efficiency hybrid digital pulse width modulator (DPWM) with process and temperature (PT) calibration has been proposed for digital controlled DC-DC converters. The hybrid structure of DPWM combines a 6-bit differential tapped delay line ring-mux digital-to-time converter (DTC) schema and a 6-bit counter-comparator DTC schema, resulting in a power and area saving solution. Furthermore, since the 6-bit differential delay line ring oscillator serves as the clock to the high 6-bit counter-comparator DTC, a high frequency clock is eliminated, and the power is significantly saved. In order to have a simple delay cell and flexible delay time controllability, a voltage controlled inverter is adopted to build the deferential delay cell, which allows fine-tuning of the delay time. The PT calibration circuit is composed of process and temperature monitors, two 2-bit flash ADCs and a lookup table. The monitor circuits sense the PT (Process and Temperature) variations, and the flash ADC converts the data into a digital code. The complete circuits design has been verified under different corners of CMOS 0.18um process technology node.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.8
• /
• pp.1348-1355
• /
• 1997

Machine element design is a very important course in the undergraduate program of mechanical engineering in that it presents traditional design concepts. While computer aided design(CAD) receives more attention, students tend to ignore the machine element design or traditional design concepts. However, design methodologies related to machine elements are utilized quite often in practical fields. Also, design methodologies provide good insight for the decision making process of modern design. Generally, CAD is used for simple drafting without the real design process in the undergraduate program. Design software has been developed for various machine elements. Through menu display, a user can select or furnish the design input such as design objects, dimensions, environmental forces and usages, and safety factors. Then the software carries out the design processes which are the same as those of textbooks. The result of the design is filtered to have the values in the standards. The designed machine element is drawn via commercial CAD software. The software has been developed with C language on a personal computer. The developed software is being utilized successfully in a design course, and the experiences are discussed in this paper. The software can be used in industries which require the repeated process of the machine element design.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.4
• /
• pp.43-52
• /
• 1996

This paper describes interactive computer procedures for design the forming sequences in cold forging. This system is implemented on the personal computer and its environment is a commercial AutoCAD system. The programming language. AutoLISP, was used for the configuration of the system. Since the process of metal forming can be considered as a transformation of geometry, treatment of the geometry of the part is a key in process planning. To recognize the part section geometry, the section entity representation, the section coordinate-redius representation and the section primitive geometru were adopted. This system includes six major modules such as input module, forging design module, forming sequence design module, die design module, FEM verification module and output module which are used independently or in all. The sequence drawing wigh all dimensions, which includes the dimensional tolerances and the proper sequence of operations, can generate under the environment of AutoCAD. The acceptable forming sequences can be verified further, using the FE simulation.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.15 no.3
• /
• pp.357-362
• /
• 2005

Iris recognition system is the one of the most reliable biometries recognition system. An algorithm is proposed to determine the localized iris from the iris image received from iris input camera in client. For the first step, the algorithm determines the center of pupil. For the second step, the algorithm determines the outer boundary of the iris and the pupillary boundary. The localized iris area is transformed into polar coordinates. After performing three times Wavelet transformation, normalization was done using a sigmoid function. The converting binary process performs normalized value of pixel from 0 to 255 to be binary value, and then the converting binary process is compared pairs of two adjacent pixels. The binary code of the iris is transmitted to the server by the network. In the server, the comparing process compares the binary value of presented iris to the reference value in the database. The process of recognition or rejection is dependent on the value of Hamming Distance. After matching the binary value of presented iris with the database stored in the server, the result is transmitted to the client.