• Journal of Information Technology Applications and Management
• /
• 제12권1호
• /
• pp.241-259
• /
• 2005

This study explores a model of partnership to the success of outsourcing CTI(computer telephony integration) based customer service centers of a telecommunication service company. The motivation of the study is to extend the research on IT outsourcing to IT-enabled BPO of customer service centers as a specific IT outsourcing practice. Previous research on IT outsourcing partnership and success is reviewed for developing an a research model of IT-enabled BPO. This model is proposed based on the previous partnership success models in information systems research. The results of the study confirm major factors related to successful IT-enabled BPO in previous research. Especially, the specificity of a contract and strategic collaboration in partnership are found to be influential on the success of IT-enabled BPO.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 I
• /
• pp.465-468
• /
• 2003

In industry areas, a lot of factories and process plants need network for processing data acquired from field and for communicating between sensors or actuators or field controllers. Most of the industry networks are based on wired solutions. But, recently, a lot of factories and process plants are moving into wireless solutions since they have some advantages compared with wired one. In this paper we first review the characteristics of wired and wireless network technologies and introduce the new technique called wireless sensor network (WSN). And then we describe the wireless sensor node system designed by us for WSN which has the ability of small size, flexibility and low-power consumption and embedded into the Bar-code scanner to communicate each other. Finally, we conclude this paper by showing that wireless industry network can be constructed with wireless sensor network without large change of traditional wired topologies through experiment using wireless sensor nodes.

• 한국기계가공학회지
• /
• 제16권1호
• /
• pp.77-82
• /
• 2017

A computer simulation method is introduced to understand the joining phenomena of PC and CFRP by estimating the temperature of the weld zone. Following the prior or preliminary research, the power range was set between 3 watts and 7 watts, and the scanning speed was set at 500 mm/min and 1,000 mm/min, respectively. Based on the computer simulation, the temperature near the joining boundary was not sufficient at the scanning speed of 1,000 mm/min, regardless of the selected powers. However, the temperature increases above the melting temperature of the selected polymers at the scanning speed of 500 mm/min. The simulation results were compared with actual weld samples to validate its actual use.

• 열처리공학회지
• /
• 제2권2호
• /
• pp.1-10
• /
• 1989

In this study, the specimens of SCM 22 H steel were quenched in oil and water baths at various agitation conditions in order to investigate the effects of quenchants and agitation conditions on the quench-hardening. A multi-channel temperature measurement apparatus was employed to obtain the cooling curves at several predetermined positions of specimens. Microstructural observation and hardness test were also carried out. Computer simulation of heat treating process was carried out using the modified finite difference method. Prediction of thermal history and hardness distribution by 2-dimensional computer analysis was in good agreement with the experimental results. It was found that the quantitative design of heat treating process can be made by the computer aided heat-treating analysis.

• 열처리공학회지
• /
• 제2권2호
• /
• pp.11-16
• /
• 1989

Understanding and control of thermal history of heat-treated components are very important in heat treating process. A computer program was developed for prediction of thermal history in quenching process with various cooling media and agitation conditions. Computer simulation of heat flow in quenching treatment of spur gear of SCM 22 H was carried out by two and three dimensional finite difference method. Distributions of microstructure and hardness in heat-treated spur gear were predicted by computer simulation, and the results showed a good agreement with the experiments. It was concluded that the

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1996년도 추계학술대회 학술발표 논문집
• /
• pp.234-238
• /
• 1996

In this paper, Plasma-Enhanced Chemical Vapor Deposition (PECVD) modeling using Polynomial Neural Networks (PNN) has been introduced. The deposition of SiO2 was characterized via a 25-1 fractional factorial experiment, was used to train PNNs using predicted squared error (PSE). The optimal neural network structure and learning parameters were determined by means of a second fractional factorial experiment. The optimized networks minimized both learning and prediction error. From these PNN process models, the effect of deposition conditions on film properties has been studied. The deposition experiments were carried out in a Plasma Therm 700 series PECVD system. The models obtained will ultimately be used for several other manufacturing applications, including recipe synthesis and process control.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.846-849
• /
• 2009

In this study, we manufactured polymer-LED using light emitting copolymer as the active layer. After cathode layer deposition, we did post-annealing at $150^{\circ}C$ during 10 min in $N_2$ glove box. Then, we confirmed that the efficiency of the device was significantly enhanced by post annealing process. Its value was increased from 0.18(cd/A) to 1.32(cd/A), approximately 7 times. This phenomenon is a result of improved stability between polymer and metal cathode for injection of electrons as the contact density increases.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 C
• /
• pp.2187-2189
• /
• 2005

It is widely know that one of the most important tasks is the research of plasma for the purpose o nuclear fusion, is to make a stable confinement of high ${\beta}$ value plasma. And, for making the stable confinement, pinch p1-asma produced by reversed field has been mainly studied yet. Magnetic field has been used to hold plasma at high temperature for a long time. Reverse field has shown unstable process. Using ratio frequency, the author could control the instability of the process and formed a stable erversed field. Inthe experiment let a reversed field configuration from by adding-Bias field in advance.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2004년도 춘계학술발표대회
• /
• pp.1655-1658
• /
• 2004

Current rendering processors are organized mainly to process a triangle as fast as possible and recently parallel 3D rendering processors, which can process multiple triangles in parallel with multiple rasterizers, begin to appear. For high performance in processing triangles, it is desirable for each rasterizer have its own local pixel cache. However, the consistency problem may occur in accessing the data at the same address simultaneously by more than one rasterizer. In this paper, we propose a parallel rendering processor architecture, called DAVID II, resolving such consistency problem effectively. Moreover, the proposed architecture reduces the latency due to a pixel cache miss significantly. The experimental results show that DAVID II achieves almost linear speedup at best case even in sixteen rasterizers.

• International Journal of Advanced Culture Technology
• /
• 제9권1호
• /
• pp.203-209
• /
• 2021

When carrying out computer programming, the process of checking and correcting errors in the source code is essential work for the completion of the program. Non-computer majors who are learning programming for the first time receive feedback from instructors to correct errors that occur when writing the source code. However, in a learning environment where the time for the learner to practice alone is long, such as an online learning environment, the learner starts to feel many difficulties in solving program errors by himself/herself. Therefore, training on how to check and correct errors after writing the program source code is necessary. In this paper, various types of errors that can occur in a Python program were described, the errors were classified into simple errors and complex errors according to the characteristics of the errors, and the distributions of errors by Python grammar category were analyzed. In addition, a coding learning process to refer error lists was designed to present a coding learning method that enables learners to solve program errors by themselves.