• Journal of Information Processing Systems
• /
• v.7 no.1
• /
• pp.93-102
• /
• 2011

In deeply scaled CMOS technologies, two major non-ideal factors are threatening the survival of the CMOS; i) PVT (process, voltage, and temperature) variations and ii) leakage power consumption. In this paper, we propose a novel post-silicon tuning methodology to scale optimum voltage and frequency "dynamically". The proposed design technique will use our PVT sensor circuits to monitor the variations and based on the monitored variation data, voltage and frequency will be compensated "automatically". During the compensation process, supply voltage is dynamically adjusted to guarantee the minimum total power consumption without violating the frequency requirement. The simulation results show that the proposed technique can reduce the total power by 85% and the static power by 53% on average for the selected ISCAS'85 benchmark circuits with 45 nm CMOS technology compared to the results of the traditional PVT compensation method.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.1
• /
• pp.326-332
• /
• 2018

In this paper, the design process and the control method of the power conversion system (PCS) that consists of a bidirectional DC-DC converter and a 3-level T-type inverter for an energy storage system is presented. Especially the design method of the output LCL filter for a 3-lvel T-type inverter without complex mathematical process are proposed. The validity of the control method and design process in this paper are verified through simulation and experimental analysis.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2609-2611
• /
• 2003

In this study, we explain the process and the technique required for implementing web-based remote control system based on embedded processor, SAl110, and embedded Linux. At first. cross-compile environment for target system should be constructed on host computer, and bootloader in charge of Linux booting may be loaded on the target system. Then, kernel image is compiled and loaded on the target system. Embedded Linux porting process is completed when ram disk image is generated. Finally, we load wed-server and device driver on the ram disk and make web-page for remote control using CGI. Through the above process, we implement web-based remote control system and present the result.

• Journal of information and communication convergence engineering
• /
• v.19 no.4
• /
• pp.257-262
• /
• 2021

Providing web services to users has become expensive in recent times. For better web services, a web server is provided with high-performance technology. To achieve great web service experiences, tools such as general-purpose graphics processing units (GPGPUs), artificial intelligence, high-performance computing, and three-dimensional simulation are widely used. However, graphics processing units (GPUs) are used in high-speed operations and have limited general applications. In this study, we developed a task queue in a GPU to improve the performance of a web service using a multiprocessor and studied how to receive and process user requests in bulk. We propose the use of a GPGPU-based task queue to process user requests more than GPGPU based a central processing unit thread, and to process more GPU threads on task queue at about 136% to 233%, and proved that the proposed method is effective for web service.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.12
• /
• pp.115-122
• /
• 2018

As the proportion of software in weapon systems increases, the impact of software on the overall system is growing. As a result, software quality management becomes important, and related regulations and work manuals for quality assurance activities at each stage in the R & D process are becoming more sophisticated. However, due to the characteristics of the weapon system software that is developed as a customized form for the purpose of a specific mission, there are limits to specifying and definitizing the detailed requirements (upper and lower level) according to various operational concepts during the development process. Due to this, software modification (patch change, shape change due to upgrade, etc.) occurs on account of many defects and performance improvement in the mass production and operation stage after the development is completed. In this study, we analyze the characteristics of these weapon system softwares and propose quality improvement methods based on ISO / IEC / IEEE 29119 test method.

• International Journal of Computer Science & Network Security
• /
• v.21 no.4
• /
• pp.75-79
• /
• 2021

The article covered theoretical aspects use of information and communication technologies in teaching. Information and communication technologies are technologies that allow you to search, process and assimilate information from various sources, including the Internet. This is the presentation of information in electronic form, its processing and storage, the use of the computer, a variety of programs. The use of information and communication technologies in the work of a student gives an increase in motivation for learning; increased cognitive interest; evaluate their learning activities, identify the problems of their own educational activities; the formation of cognitive independence of students.

• Transactions of the Korean hydrogen and new energy society
• /
• v.34 no.1
• /
• pp.83-89
• /
• 2023

In this study, a computer simulation work has been performed for the separation of electronic grade highly pure carbon dioxide more than 7 N purity through a cryogenic distillation process. For the cold utility as a cooling medium for a condenser of the cryogenic distillation column, propylene was utilized as a refrigerant in the vapor-recompression refrigeration cycle. Through this work, it was concluded that the cryogenic distillation column with two stage compression and refrigeration cycle were essential to obtain a highly-pure liquefied CO₂.

• Journal of Internet Computing and Services
• /
• v.20 no.3
• /
• pp.77-84
• /
• 2019

Workflow management system is a system that manages the workflow model which defines the process of work in reality. We can define the workflow process by sequencing jobs which is performed by the performers. Using the workflow management system, we can also analyze the flow of the process and revise it more efficiently. Many researches are focused on how to make the workflow process model more efficiently and manage it more easily. Recently, many researches use the workflow log files which are the execution history of the workflow process model performed by the workflow management system. Ourresearch group has many interests in making useful knowledge from the workflow event logs. In this paper we use XES log files because there are many data using this format. This papersuggests what are the cardinalities of the temporal workcases and how to get them from the workflow event logs. Cardinalities of the temporal workcases are the occurrence pattern of critical elements in the workflow process. We discover instance cardinalities, activity cardinalities and organizational resource cardinalities from several XES-based workflow event logs and visualize them. The instance cardinality defines the occurrence of the workflow process instances, the activity cardinality defines the occurrence of the activities and the organizational cardinality defines the occurrence of the organizational resources. From them, we expect to get many useful knowledge such as a patterns of the control flow of the process, frequently executed events, frequently working performer and etc. In further, we even expect to predict the original process model by only using the workflow event logs.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1125-1128
• /
• 2007

The laminating technique for developing flexible liquid crystal display was demonstrated by using a thin UV curable polymer film and a plastic substrate with patterned polymer wall structure. We adopted the rigid wall structure to provide a solid mechanical support for the stable molecular alignment of liquid crystals (LCs) in the device. The cover film was prepared to have an ability of aligning LC molecules by patterning a micro-groove structure using the soft-lithographic process. These two substrates can be assembled tightly by the laminating and one-step UV irradiation process because of the adhesive nature of the used UV curable polymers. Proposed method can be used to fabricate the flexible LC display with simplicity and also be applicable for a cost-effective roll-to-roll process.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.04a
• /
• pp.327-331
• /
• 2001

In the process of optical parts machining, polishing has been applied. Traditional polishing process is suitable for spherical optical parts. But it is very difficult to apply traditional process for aspheric optical parts. Nowadays, as growing needs for aspherical optic parts, many researches have been conducted. In this study, we developed computer controlled polishing system which consists of three major parts of active pressure control for correcting polishing process, mechanical on-machine measurement for rough polishing, and optical on-machine measurement for finish polishing, respectively. In this paper, a systematic stretegy for correcting polishing process, pressure control scheme for polishing tool, and on-machine measurement methods for automated and precise polishing are suggested. The information about developed machine is also included.