• 마이크로전자및패키징학회지
• /
• 제9권3호
• /
• pp.25-29
• /
• 2002

단일이온교환 공정을 도입하여 평판디스플레이에 사용되는 기판유리를 대상으로 이온교환 거동 및 기계적 특성에 대하여 조사하였다. 효과분석으로는 온도와 시간 변화에 따른 $K^+$ 이온의 침투깊이, 이온교환량, 밀도, 열팽창계수를 관찰하였다. 기판유리의 기계적 특성으로는 3점 곡강도와 만곡변화를 관찰하였으며, 광학현미경을 사용하여 곡강도 측정 후 파괴된 시편의 형태를 조사하였다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제50권4호
• /
• pp.153-160
• /
• 2001

In order to analyze the degradation process of epoxy/glass fiber for outdoor condition, FRP laminate was exposed to high temperature. Then, the degradation process was evaluated by comparing contact angle, surface potential, surface resistivity, and XPS. The experimental results showed that the amount of weight loss, contact angle, surface potential and surface resistivity increased up to 200 $^{\circ}C$ as a function of temperature. These phenomena show the existence of hydrophobic surface. With the change to the hydrophobic surface and the electrical potential and resistivity on FRP surface increased. In XPS to analyze surface chemical structures, the increased hydrophobicity in thermal increase of unsaturated double bond in carbon chains. Aslo, thermal treatment caused the discoloration on the point of treated surface. These phenomena were attributed to the generations of ether group.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2001년도 추계학술발표논문집 (상)
• /
• pp.767-770
• /
• 2001

Edge detection is one of issues with essential importance in the area of image process. An edge in image is a boundary or contour which a significant change occurs in image intensity. In the paper, we process edge detection algorithms which are based on Potts automata. The dynamical behavior of these automata is completely determined by Lyapunov operators for sequential and parallel update. If Potts Automata convergence to fixed points, then it can be used to image processing. From the generalized Potts automata point of view, we propose a Potts Automata technique for detecting edge. Based on the experimental results we discuss the advantage and efficiency.

• 한국조경학회지
• /
• 제21권2호
• /
• pp.17-33
• /
• 1993

This paper is the on-site case study of the shaping of townscape of port towns in Korea. Inchon has been experienced the rapid urbanization after the opening of a port. Inchon is selected because of the relatively rapid process, the apparent event and influence, and the enough referneces of data about the landscape formation and transformation. As the value of historical landscape, it is very significant to study Inchon and the causes of change in townscape depend on the external element-the opening of a port, Japan colonial policy, economic progress, nationwide development. The main purpose of this study is scrutinized the process, the cause and effect, and the contents and the form of shaping of townscape. The result of the interpretation of landscape is never perfect but only a starting point. Finally this study will be applied to the pragmatic task as a basic tool which construct the desirable image of the city.

• Communications for Statistical Applications and Methods
• /
• 제27권2호
• /
• pp.163-175
• /
• 2020

We consider a wide class of general weakly-dependent processes, called ψ-weak dependence, which unify almost all weak dependence structures of interest found in statistics under natural conditions on process parameters, such as mixing, association, Bernoulli shifts, and Markovian sequences. For detecting the tail behavior of the weakly dependent processes, change point tests are developed by means of cumulative sum (CUSUM) statistics with the empirical distribution functions of sample extremes. The null limiting distribution is established as a Brownian bridge. Its proof is based on the ψ-weak dependence structure and the existence of the phantom distribution function of stationary weakly-dependent processes. A Monte-Carlo study is conducted to see the performance of sizes and powers of the CUSUM tests in GARCH(1, 1) models; in addition, real data applications are given with log-returns of financial data such as the Korean stock price index.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 추계학술대회논문집
• /
• pp.636-642
• /
• 2000

A method for reducing the contact noise of the Progressive Multi-Leaf Spring was investigated. It was found that the contact noise between the main and the help springs is the main source of the noise through our experiments. The conclusions from our experiments were compared with those from our numerical analysis by use of ABAQUS. The main parameters for the unexpected noise in the leaf spring were investigated through structural analysis to make describing noise generation. The contact process between the two leaves is examined by numerical calculations by ABAQUS. The noise produced by the leaf spring could be dramatically reduced by changing the shape of help spring so as to remove a translational jump of the contact point between the main and the help springs. Even with the help spring of the new proposed shape the stiffness of the whole spring did not change much.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권5호
• /
• pp.563-569
• /
• 2015

A chemical reaction occurring in CSTR (Continuous Stirred Tank Reactor) is significantly affected by the concentration, temperature, pressure, and reacting time of materials, and thus it has strong nonlinear and time-varying characteristics. Also, when an existing linear PID controller with fixed gain is used, the performance could deteriorate or could be unstable if the system parameters change due to the change in the operating point of CSTR. In this study, a technique for the design of a fuzzy PD plus I controller was proposed for the temperature control of a CSTR process. In the fuzzy PD plus I controller, a linear integral controller was added to a fuzzy PD controller in parallel, and the steady-state performance could be improved based on this. For the fuzzy membership function, a Gaussian type was used; for the fuzzy inference, the Max-Min method of Mamdani was used; and for the defuzzification, the center of gravity method was used. In addition, the saturation state of the actuator was also considered during controller design. The validity of the proposed method was examined by comparing the set-point tracking performance and the robustness to the parameter change with those of an adaptive controller and a nonlinear proportional-integral-differential controller.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2014년도 춘계학술대회
• /
• pp.861-863
• /
• 2014

실내 위치 기반 서비스를 위한 대표적인 위치 추정 시스템으로 fingerprinting 기법이 존재하지만 fingerprinting map을 구축하는 시간이 오래 걸리는 문제가 있으며, 이러한 문제를 해결하기 위해 유사한 공간에서 WAP(wireless access point)의 수신신호가 항상 유사하다는 것을 증명해야한다. 본 논문에서는 WAP의 수신신호 데이터를 이용한 fingerprinting map을 구성할 수 있는 방안을 제안한다. 이를 위해 같은 공간에서 WAP의 위치를 변경하며 그에 따른 거리 대 RSSI 변화 추이를 확인하였으며, 유사한 공간의 다른 지점에서 수집한 RSSI가 유사하게 변화는 것을 확인하였다.

• 한국정보기술학회논문지
• /
• 제17권6호
• /
• pp.9-16
• /
• 2019

최근 제조 공정을 개선하려는 기업들은 스마트 팩토리를 도입, 이에 따른 도약이 특별히 눈에 띈다. 이는 최소한의 수동 제어를 통해 완벽하게 생산시설의 프로세스를 수행하는 스마트 팩토리의 영역을 최대화하고 추론의 오차를 최소화 하는 것이 최종 목적이다. 본 연구는 무인 생산, 관리, 포장, 배송 관리를 위한 프로젝트의 일부로써 무인생산의 자동화 설비의 철근 추적을 통해 롤러의 자동 교정을 수행하기 위해 철근 추적 시작점 검출에 대한 연구이며, 시작지점부터 끝점까지의 위치를 정확히 추적해야 하는 요구사항을 만족해야 한다. 추적성능을 높이기 위해서는 시작점 설정이 주요한데 기존의 시간 기반 검출방법을 통해서는 조도, 분진 등 환경에 따라 추적오류의 발생 확률이 높다. 본 논문에서는 환경에 따른 오차를 줄이기 위해 고속 IR카메라의 평균 밝기 변화를 이용한 시작점 검출 방법을 제안하며, 제안 사항을 통해 15%이상의 성능 향상을 확인하였다.

• 한국재료학회지
• /
• 제26권12호
• /
• pp.681-687
• /
• 2016

Zirconium(Zr) nuclear fuel cladding tubes are made using a three-time pilgering and annealing process. In order to remove the oxidized layer and impurities on the surface of the tube, a pickling process is required. Zr is dissolved in HF and $HNO_3$ mixed acid during the process and pickling waste acid, including dissolved Zr, is totally discarded after being neutralized. In this study, the waste acid was recycled by adding $BaF_2$, which reacted with the Zr ion involved in the waste acid; $Ba_2ZrF_8$ was subsequently precipitated due to its low solubility in water. It is very difficult to extract zirconium from the as-recovered $Ba_2ZrF_8$ because its melting temperature is $1031^{\circ}C$. Hence, we tried to recover Zr using an electrowinning process with a low temperature molten salt compound that was fabricated by adding $ZrF_4$ to $Ba_2ZrF_8$ to decrease the melting point. Change of the Zr redox potential was observed using cyclic voltammetry; the voltage change of the cell was observed by polarization and chronopotentiometry. The structure of the electrodeposited Zr was analyzed and the electrodeposition characteristics were also evaluated.